Loading...
Operation 6036
PM
MENU
PROG
AUTO |
FAN |
ON |
|
||
|
|
RESET
COOL |
OFF |
HEAT |
|
||
|
|
ENGLISH
Operation 6036
Time of day
Day
Time Slot
Current
Room
Temperature
Target
Temperature
PM
Touch
Screen
Thermostat
Mode
PROG |
MENU |
|
Program |
|
OFF |
|
button |
FAN |
||
|
AUTO ON COOL HEAT |
||
Menu |
Fan |
Mode |
|
button |
Switch |
||
Switch |
|||
|
|
||
Using a TOUCH SCREEN
Please take a moment to try out your touch screen itself. To select a function on the touch screen, place your
finger on the main temp display and give a short firm push. Try a "tap" of the finger or stylus. Your input must last long enough for the system to determine it is not an accidental 'bump'.
Using the stylus is more comfortable for some users. Again allow the system enough time to recognize your inputs.
When you are comfortable with touch inputs, proceed.
Statement of use: The 6036 can be used with millivolt, 24VAC, single and 2 stage |
|
|
conventional systems, gas/oil/electric heat, 1 stage heat pumps, 2 stage heat |
|
|
pumps, zoned hot water (2 or 3 wire), zoned forced air, single and 2 stage cooling |
1 |
|
and hybrid systems. |
P |
|
Basic Screens
The MODE SWITCH of the 6036 must be in the HEAT or the COOL position to access all control functions. The 6036 Thermostat has 3 basic screens.
The HOME screen is displayed when unit is operating your system.
Touching the 
will always return you to this screen.
HOME screen
Time of day
Touch here to change from 12 to 24hr
clock display.
Day Time Slot
Current Room 
Temperature
Thermostat Mode
Chirp indicator
Target 
Temperature 
PM
P 2
MENU screen |
|
Set Time |
Displayed when the |
|
Touch this area to set |
|
the time of day. |
|
MENU button is pressed. |
|
Left arrow goes back, |
Set oC -oF |
right arrow goes forward. |
|
Touch this to |
|
Set Day |
set temperature |
Touch this area to set |
|
display. |
|
the day of the week. |
Temperature Swing set
Chirp set Filter Timer set
Touch this to turn the audible chirp on or off.
Calibration indicator |
Lock Program |
|
Touch for 2 sec |
||
This shows if you have altered |
||
to lock or unlock |
||
the calibration of your unit |
||
|
Return HOME |
P 3 |
PM
PROGRAM screen
Displayed when the PROGRAM button is pressed.
Set Program Time
Touch this area to set the time of day you want each time period to start.
Left arrow goes back, right arrow goes forward.
Copy
Touch this area to copy current program to the next day
EPA
Touch and hold for 4 sec to return to
EPA Energy-Star prog
Return HOME
Set Program Day 
Touch this area to set the day of the week you want to program Target
Temps for. Set Time Slot
Touch this area to set the Time Slot you want to program.
Review
touch this area to auto cycle through your program
Temp Up / Temp Down arrows. Touch these to raise and lower each Target Temp.
PM 
EPA 
P 4
Loading...