Loading...
Operation Guide 6022 
Statement of use: The 6022 can be used with - millivolt, 24V single and 2-stage conventional systems, gas/oil/electric heat, 1-stage heat pumps, 2 -stage heat pumps, zoned hot water (2 or 3 wire), zoned forced air, single and 2- stage cooling, and hybrid systems.
Reset button
TEMP UP button
Target
Temp
Time
TEMP DOWN button
TARGET TEMP
HEAT
SET CLOCK
PROG2
Control Panel
Heat/Cool
Mode Switch
Fan
Switch
TIME SET
|
TIME SLOT |
|
|
|
EPA |
|
|
|
COPY HOLD |
REVIEW |
FILTER |
PROGRAM |
|
||
|
|
||
|
|
|
Battery
Compartment
ENGLISH
Set Clock
Set day of the week -
•Press SET CLOCK once to set the day of the week. The day of the week display
flashes. (Initially SU for Sunday)
•Press <TITIME or TIME> 
to select the day.
Set time of day -
PG 2
|
4 |
5 |
1 2 3 |
6 |
7 |
8 |
|
TARGET TEMP
HEAT
SET CLOCK |
PROG2 |
|
|
TIME SET |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TIME SLOT
EPA 
PROGRAM |
COPY HOLD REVIEW FILTER |
•Press SET CLOCK again to set the time. The time display will flash.
•Press <TIMEE or TIME> to set the time. Press and hold to set the time
in the fast mode.
• Press HOME to store your settings.
HEAT |
MORN |
|
|
DAY |
|
|
EVEN |
|
NIGHT |
|
6:00am |
|
8:00am |
|
6:00pm |
|
10:00pm |
||
All Days |
o |
o |
F |
70 |
o |
F |
62 |
o |
F |
70F 62 |
|
|
|
||||||
EPA Program |
COOL |
MORN |
|
DAY |
|
|
EVEN |
|
NIGHT |
|
|
6:00am |
|
8:00am |
|
6:00pm |
|
10:00pm |
|||
|
All Days |
o |
85 |
o |
F 78 |
o |
F |
82 |
o |
F |
|
78F |
|
|
|
||||||
This Thermostat comes preprogrammed
with an Energy-StarTM approved program. This program is recommended by the EPA for energy efficiency. We strongly recommend that you use this program for one week, and see if it works for you. If it does not fit your needs you can always input a custom program.
•To Run the Energy-StarTM program, select HEAT or COOL with the mode switch. The unit is now running the EnergyStarTM program. To return to the E-star program press EPA.
•One of the TIME SLOT icons MORN, DAY, EVEN, NITE comes on, this indicates the TIME SLOT active in the Energy-StarTm program. For program details refer to the Energy-StarTM
program chart above. 3 time
PG
target time temp slot temp
TARGET TEMP
HEAT
day mode
Program |
NOTE: 60 Second Rule-During programming, if a button is not |
|
pushed within 60 seconds, the unit will go out of the set mode. |
Everything you have input in this programming will automatically be saved.
•Select HEAT with the HEAT/Cool MODE switch.
•To select the DAY you want to program: Press PROGRAM to enter programming mode. The PROGRAM icon will come on. The day icon will show
SU (Sunday). Press day |
again to advance the day selection. |
DAY |
|
• Select the TIME SLOT you want to program: To change the TIME SLOT |
|||
(MORN, DAY, EVEN, NITE) press the EXT button. The display will cycle |
|||
|
NEXT |
|
|
through the time periods in sequence. Select MORN. |
|
||
• Select the desired temperature for that TIME SLOT : To change the |
|||
temperature for that TIME SLOT press the TEMP +/- buttons. |
PG 4 |
||
• Select the time of day you want that TIME SLOT to represent: |
|||
To set the time when MORN will begin , press the |
<TIME or |
TIME> buttons |
|
to move the set point forward or backward in time. |
TIME |
TIME |
|
|
|
||
• Select the next TIME SLOT and program temp and time: |
|||
Press |
T> the display will show DAY. Repeat setting temp and time. |
||
|
NEXT |
|
|
Select the remaining TIME SLOT's, EVEN and NITE. Program their temp and |
|
|
time info. Repeat the above procedures for each day of the week. |
|
|
Push |
AY> button to cycle through the days. |
|
|
DAY |
|
To COPY the program of the current day to another day, press COPY |
|
|
program once. COPY will display on the LCD. The day icon for the source |
|
|
day will go solid and the day icon for the destination day will flash. Use day |
|
|
button to select the destination day. Press COPY again to confirm the copy. |
|
|
If you decide you don't want to copy, press HOME to exit. |
5 |
|
|
PG |
|
Loading...