RIDGID K-380 User Manual
Kollmann
Ridge T ool Company
400 Clark St., Elyria Ohio 44036-2023 U.S.A.
Catalog Sheet No. R-00-C
Effective Date: August 1, 2000
Visit us on the Internet: www.ridgid.com
New!
Demand the Best. . .
K-380 Drain Cleaner
Printed in U.S.A. © RTC 7/00 All sales subject to Ridge Tool Company Terms and Conditions of Sales. 999-997-358.10
K-380 Machine Only
The new K-380 from RIDGID/Kollmann offers several unique, user-friendly features to make the toughest drain
cleaning jobs easier and hassle-free. Designed with an ultra modern-style and sleek profile, the K-380 is a good
fit for drain cleaners, service plumbers, facility and institutional maintenance departments and property management companies. Several new features include:
• New T orque Limiter – Causes the drum to stop spinning when the blade becomes lodged in a blockage.
Limits potential for cable flipover, warns operator when blockages are encountered.
• Contemporary Style Drum Design – Rugged, corrosion resistant, polyethylene drum is rust and dent proof
and features larger access holes to drum interior. Positioned 90 degrees to the floor for better cable control.
• New “Solid Core”Cable – Uses tough 3/8″ or 1/2″ Integral Wound (IW) solid core
cable that is rugged and kink resistant. Each size comes in 50′ or 75′ lengths and
utilizes a variety of the RIDGID quick connect cutter.
• Autofeed – Offered as an accessory, this patent pending automatic cable feed delivers
cable into the drain with minimal hands on effort. Reverse the direction of the autofeed
and the cable feeds back into the drum.
K-380 with Cart and Autofeed
Against Material Defects
& Workmanship
FULL LIFETIME
WARRANTY
K-380 Drain Cleaner
Distributor
Kollmann
Catalog Model
No. No. Description
62990 T-201 Straight Auger, 5″ (127mm) Long
62995 T-202 Bulb Auger, 1
1
/8″ O.D.
63000 T-203 Bulb Auger,
7
/8″ (22mm) Diameter
54837 T-204 “C” Cutter, 1″
63005 T-205 “C” Cutter, 1
3
/
8
″
63010 T-206 Funnel Auger, 3″ (76mm) Long
63020 T-208 Spiral Cutter, 1
1
/2″ (38mm) Diameter
63025 T-209 Spiral Cutter, 2” (51mm) Diameter
63030 T-210 Grease Cutter, 1″ (25mm) Wide
63035 T-211 Grease Cutter, 1
3
/8″ (35mm) Wide
63040 T-212 Grease Cutter, 1
3
/4″ (44mm) Wide
63045 T-213 Four-Bladed Cutter, 1″ (25mm) Wide
63050 T-214 Four-Bladed Cutter, 1
3
/8″ (35mm) Wide
63055 T-215 Four-Bladed Cutter, 1
3
/4″ (44mm) Wide
63060 T-216 Chain Knocker, 2″ (51mm) Diameter
63065 T-217 Drop Head Auger, 4″ (102mm) Long
63280 T-218 Flue Brush, 3″ (76mm) Diameter
63070 T-219 Flue Brush, 2
1
/2″ (64mm) Diameter
63080 T-220 Flue Brush, 2″ (51mm) Diameter
63220 T-221 Flue Brush, 1
1
/2” (38mm) Diameter
59982 Cable Rust Inhibitor, 1 Quart
59987 Cable Rust Inhibitor, 1 Gallon
Catalog Model
No. No. Description
87287
K-380
K-380 Machine w/Gloves & Std. Equipment
w/C-31 IW – C-31 IW
3
/8″ x 50′ Solid Core (Integral
Wound) Cable,
– T-260 Tool Set Includes:
– T-202 Bulb Auger
– T-205 “C” Cutter
– T-211 Spade Cutter
– A-13 Coupling Pin
84522 K-380 K-380 Machine w/Gloves & Std. Equipment
w/C-32 IW – C-32 IW
3
/8″ x 75′ Solid Core (Integral
Wound) Cable,
– T-260 Tool Set
87327 K-380 PF CT K-380 Machine w/Gloves & Std. Equipment
w/C-32 IW – Two-Wheel Cart
– Autofeed
– C-32 IW
3
/8″ x 75′ Solid Core (Integral
Wound) Cable
– T-260 Tool Set
87292 K-380 K-380 Machine w/Gloves & Std. Equipment
w/C-44 IW – C-44 IW
1
/2″ x 50′ Solid Core (Integral
Wound) Cable
– T-260 Tool Kit
87297 K-380 K-380- Machine w/Gloves & Std. Equipment
w/C-45 IW – C-45 IW
1
/2″ x 75′ Solid Core (Integral
Wound) Cable
– T-260 Tool Set
87332 K-380 PF CT K-380 Machine w/Gloves & Std. Equipment
w/C-45 IW – Two-Wheel Cart
– Autofeed
– C-45 IW
1
/2″ x 75′ Integral Wound Cable
– T-260 Tool Set
Specifications
Line Capacity ...............Depends on choice of cable. Refer to the
following chart for recommendations.
Drum Capacity .............100′ of
3
/8″ Diameter Cable
75′ of
1
/2″ Diameter Cable
Motor:
Type............................115V/60 Hz, Reversible, Split Phase
Rating.........................
1
/3HP @ 1725 RPM
Amps..............................6.7
Weight (Machine Only)........37 lbs.
Length...............................22″
25″ w/Autofeed
Height ...............................22″
Width.................................15″
Additional Tools Available
For
3
/8″ & 1/2″ Cable
Recommended Line
Cable Size Size & Reach
Line Size Reach
3/8″ Cable 11/2″ – 3″ 100′
1/2″ Cable 3″ – 4″ 75′
Standard Equipment 115VCable Selection
Solid Core (Integral Wound) Cable
Cat No. Model No. Description
87577 C-31 IW
3
/8″ x 50′ w/Solid Core Cable
87582 C-32 IW
3
/8″ x 75′ w/Solid Core Cable
87587 C-33 IW 3/8″ x 100′ w/Solid Core Cable
87592 C-44 IW
1
/2″ x 50′ w/Solid Core Cable
87597 C-45 IW
1
/2″ x 75′ w/Solid Core Cable
87337 A-380 Auto Feed Assembly
59782 — Two-Wheel Transport Cart
Catalog Model
No. No. Description
90082
K-380E
K-380 Export Machine w/Gloves &
w/C-32 IW Std. Equipment
– C-32 IW
3
/8″ x 75′ Solid Core (Integral
Wound) Cable,
– T-260 Tool Set
Standard Equipment 230V
Accessories
Loading...