L
INSTRUCTION MANUA
PLVHR70
Thank you for the purchase of this Super slim design 7 inch Color TFT-LCD
monitor.Before operating the unit,please read this manual thoroughly and
keep it for future reference.
PANEL
PLVHR70
SHARP TFT-LCD
12345 6
1.Power:Power on/off
Press this button to turn on the monitor,press again to turn the monitor
off.
2.Brightness/color/contrast negative adjustment
To adjust brightness,color or contrast negatively.
3.SEL:to activate the menu and select brightness,color or contrast.
4.Brightness/co lor/contrast positive adjustment
To adjust brightness,color or contrast positively.
5.AV:to change video signal sources between V1/V2.
6.Remote control receiver
The device has the function of Picture-Flip,it allows you to rotate the screen
180 degrees and have the picture automatically flip so you can view the
picture upside-down!So you can mount the monitor up side-down in a car.
NOTE:Although the effective pixels for the liquid crystal is given as 99.98% or
more,0.02% of pixels
may not light or may light incorrectly.It is a very common phenomenon in active
matrix display
technology,do not indicate fault or broken of the unit.
Contents and specifications can be subject to change without prior notice.
REMOTE CONTROL
Po we r: Power o n/of f
POWER
Brigh tness a dj ustment
Co lor a djustment
Co ntrast adjus tment
PP: Sele ct am ong th e preset dis pla y mode
(MEMORY-STANDARD-S OFT-VI VID-L IG HT)
V1 /V2: Change betw een V 1 and V2.
SYS: Image zoom
WIRING
23mm
RED : DC 12V+
RED : V1 INPU T
YELLOW: V2 INPUT
BLACK: GROUND
NSTALLATION
1.STAND ALONE BRACKET
2.HEADREST BRACKET
Loading...