Q-See QD6002D, QD6005B, QD6502B, QD6004B, QD6003D User Manual
...
User Manual
MODEL QD6001D
QD6002D
QD6003D
QD6004B
QD6005B
QD6501B
QD6502B
QD6503X
High-Resolution Security Cameras
1
Thank You for Choosing a Q-See Product!
All of our products are backed by a conditional service warranty covering all hardware for 12
months from the date of purchase. Additionally, our products also come with a free exchange
policy that covers all manufacturing defects for one month from the date of purchase.
Permanent upgrading service is provided for the software and is available at www.Q-See.com.
Be certain to make the most of your warranty by completing the registration form online. In
addition to warranty and technical support benefits, you’ll receive notifications of product
updates along with free downloadable firmware updates for your DVR. Register today at
www.Q-See.com!
Please see the back of this manual for exclusions.
About this Manual
This manual is written for the QD6000 series of high-resolution cameras and was accurate
at the time it was completed. However, because of our ongoing effort to constantly improve
our products, additional features and functions may have been added since that time and
on-screen displays may change. We encourage you to visit our website at www.Q-See.com
to check for the latest firmware updates and product announcements. You can also find
technical details for your specific camera on its product page at our site.
Throughout the manual we have highlighted warnings and other important information that will
assist you in operating your new system in a safe and trouble-free manner. Please take the
time to read and follow all instructions and pay attention to alerts as shown below:
IMPORTANT! Red boxes with this icon indicate warnings. To prevent
possible injury or damage to the product, read all warnings before use.
NOTE! Text in blue boxes with the Information icon offer additional guidance
and explanations about how to make the most out of your system.
© 2011 Q-See. Reproduction in whole or in part without written permission is prohibited. All
rights reserved. This manual and software and hardware described herein, in whole or in part,
may not be reproduced, translated, or reduced to any machine-readable form without prior
written approval.
Trademarks: All brand names and products are trademarks or registered trademarks of their
respective owners.
Q-See is a registered trademark of DPS, Inc.
Disclaimer: The information in this document is subject to change without notice. The
manufacturer makes no representations or warranties, either express or implied, of any kind
with respect to completeness of its contents.
Manufacturer shall not be liable for any damages whatsoever from misuse of this product.
Rev. 1.0 8/19/11
2 3
TABLE OF CONTENTS
INTRODUCTION 5
Components and Connection 6
Installing Your Camera 7
Connecting the Camera to a Security DVR System 9
Connecting the Camera to a TV or Monitor 10
Controlling Your Camera 10
Operation 11
Setup Menu 11
Lens 11
Shutter/AGC (Automatic Gain Control) 12
White Balance 12
Backlight 13
Picture Adjust 13
ATR (Adaptive Tone-curve Reproduction) 13
Motion Detection 14
Privacy 14
Day/Night Mode 15
NR (Noise Reduction) 15
Camera ID 16
Sync 16
Language 16
Camera Reset 16
TROUBLESHOOTING 17
Q-SEE PRODUCT WARRANTY 18
INTRODUCTION
For your safety
To prevent damage to your Q-See product or injury to yourself or to others, read and
understand the following safety precautions in their entirety before installing or using this
equipment.
WARNING! ELECTRIC SHOCK RISK!
nCare should be taken during transportation, storage and installation of this camera to
avoid rough handling, dropping, or other abuse in order to prevent damage to the optics or
components inside the camera.
nCamera should be installed in accordance with electrical standards including keeping the
camera and cable away from high voltage, using a surge protector and using only the
rated power supply.
nDo not use strong or abrasive cleaners on camera body or lens. Use a damp cloth for
cleaning the housing and a lens cloth for the optics.
nDo not attempt to disassemble the camera. Only authorized, trained technicians should
service this camera.
nCameras should not be immersed in water and should be mounted in a sheltered location.
Do not point camera directly at the sun or other strong light source.
Product Features
These cameras offer the following features:
nUltra high definition video using 1/3” Sony HAD CCD II coupled with the latest Sony Effio-E
digital signal processors to produce 600 and 650 TV lines of resolution.
nState-of-the-art IR cut filter to ensure accurate color representation during the day and
sharper images at night.
nLow light and infrared operation. The camera takes advantage of even low levels of
ambient lighting to produce images with color.
nAutomatically switches to infrared (black and white) mode when no light is detected.
nInfrared illumination (excludes QD6305X).
nBuilt-in motion detection. The camera can be set to respond to motion even without being
connected to a DVR.
nOn-Screen Display (OSD) allows you to configure the camera using the built-in thumbstick
when connected to a monitor.
nMultiple language support; English, Spanish, French, Russian, Portuguese, German,
Chinese and Japanese.
nCustomizable settings: WDR (wide dynamic range), White Balance, Contrast, Shutter
Speed, Sharpness, etc.
nHighlight Compensation. Excessive light, such as headlights, can be masked if desired.
nManually adjustable 2.8mm to 12mmm varifocal lens and focus.
nHigh-speed Moving Object Capture function allows clear images of objects moving at high
speed.
4 5
COMPONENTS AND CONNECTION
QD6001D QD6002D
5 7
1
2
3
4
# Component
1 Clear Dome
2 Case
3 Base Release Screw (both sides)
4 Mounting Base
5 Multi-Function Button
6 Power Connector
7 Video Connector (BNC)
6
1
2
3
4
# Component
1 Optics (lens and IR LEDs)
2 Focus (behind rubber plug)
3 Body
4 Mounting Base
5 Zoom (behind rubber plug)
6 Multi-Function Button
7 Power Connector
8 Video Connector (BNC)
5
6 8
QD6005B AND QD6502B QD6503X
7 9
1 3
1
2
7
3
4
5
6 8
7
# Component
1 Adjustable Sun Shade
2 Optics (lens and IR LEDs)
3 Zoom Knob (2.8mm - 12mm)
4 Focus Knob
5 3-Axis Mounting Bracket
6 Multi-Function Button
7 Power Connector
8 Video Connector (BNC)
2
4
5 6
# Component
1 CS Lens (packaged separately)
2 Lens Mount Spacing Adjustment
3 Auto Iris Port (on right side)
4 Focus Adjust
5 Iris Adjustment Ring
6 Zoom
7 Multi-Function Controls
8 Power Status Indicator
9 Power Connection
10 Video Connector (BNC)
8
10
QD6003D QD6004B AND QD6501B
5
1
6
2
3
4
# Component
1 Optics (lens and IR LEDs)
2 Body
3 Base Release Screws (3)
4 Mounting Base
5 Zoom Knob (2.8mm - 12mm)
6 Focus Knob
7 Multi-Function Button
8 Power Connector
9 Video Connector (BNC)
7 9
8
1
2
3
4
5
# Component
1 Adjustable Sun Shade
2 Optics (lens and IR LEDs)
3 Zoom Knob (2.8mm - 12mm)
4 Focus Knob
5 3-Axis Mounting Bracket
6 Multi-Function Button
7 Power Connector
8 Video Connector (BNC)
6 8
7
INSTALLING YOUR CAMERA
When installing your camera, it is important to select a proper site not only for field of view, but
for other considerations as well:
Distance from viewing/recording device. The further the camera is from the DVR or monitor,
the higher the chances of signal degradation. Typical 75Ω Video Cable provides acceptable
signal at distances up to 200’ (30m). At greater distances, UL-Listed shielded RG59 should be
used. The camera’s power supply should be located as near to the camera as possible when
the distance exceeds 200’ as the power level will drop over extended distances resulting in a
decrease in video quality and IR LED range.
Do not place near high voltage wires or other sources of electrical interference. Electrical
interference will degrade the quality of the signal.
Place camera out of reach to avoid damage.
Avoid direct exposure to weather. Do not place the camera where rain or snow will hit the
lens directly nor should the camera be placed so that the sun or bright light shines directly into
the lens. Indoor cameras should never be placed outside. Weatherproof cameras will not work
when submerged. Ensure that all power and video connections are not directly exposed to
water and are protected from the elements.
Do not place camera behind a window. The IR LEDs act like a flashlight and will create a
reflection that will obscure events on the other side of the glass.
Light levels should be approximately the same between camera and target area. A
camera in a brightly-lit area looking into a shaded area, or vice versa, will produce inadequate
results.
6 7
Loading...