How it Works
Q-See
Loading...
QD54231Z
Technical Manual
36 pgs681.56 Kb0

Q-See QD54231Z Technical Manual

Integrated Intelligent Speed Dome
User’s Manual
Version 1.0
Table of Contents
1.2.1 On-Screen Menu ................................................................................................................................ ..... 3
1.2.2 On-screen Tips ........................................................................................................................................ 3
1.2.3 Support multiple protocols ...................................................................................................................... 3
1.2.4 Proportional Pan and Tilt......................................................................................................................... 3
1.2.5 Preset Setup ............................................................................................................................................ 3
1.2.6 Auto Scan ................................................................................................................................................. 3
1.2.7 Auto Pattern ............................................................................................................................................. 4
1.2.8 Auto Touring............................................................................................................................................. 4
1.2.9 Auto Flip ................................................................................................................................................... 4
1.2.10 Self-diagnosis ...................................................................................................................................... 4
1.2.11 Day/Night Mode (B/W & Color Mode) ................................................................................................ 4
1.2.12 Auto Focus........................................................................................................................................... 4
1.2.13 Backlight Compensation ................................ ..................................................................................... 4
1.2.14 Pan Tilt and Zoom ................................................................................................ ............................... 4
1.2.15 3D Intelligent Location ........................................................................................................................ 4
1.2.16 Idle Motion ........................................................................................................................................... 5
1.2.17 Image Flip ............................................................................................................................................ 5
1.3.1 Technical Specifications .......................................................................................................................... 5
1.3.2 Performance Specifications .................................................................................................................... 6
ii
3.1.1 System Layout ....................................................................................................................................... 10
3.1.2 Keyboard Connection ................................ ............................................................................................ 11
4.1.1 Self-diagnosis System Information ........................................................................................................... 13
4.1.2 Main Menu .............................................................................................................................................. 14
4.2.1 System Information ................................................................................................................................ 15
4.2.2 Display Setting ................................................................................................ ....................................... 16
4.2.3 Camera Setting ...................................................................................................................................... 16
4.2.4 Function Setting ..................................................................................................................................... 20
4.3.1 Restore to Factory Default Setup ......................................................................................................... 25
4.3.2 PTZ Movement is not smooth ............................................................................................................... 25
iii
iv
Welcome
Thank you for purchasing our product! This user’s manual is designed to be a reference tool for the operation of your system. Here you can find information about this speed dome features and functions, as well as a detailed menu tree. Please keep it well for future reference!
Before installation and operation, please read the following safeguards and warnings carefully!
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.  We assume no liability or responsibility for all the fires or electrical shock caused by
improper handling or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.
2．Transportation Security
No heavy stress, violent vibration or water splash are allowed during transportation, storage
and installation.
Please use the original packing material (or the material of the same quality) when you ship
it back to the manufacturer.
3．Installation/Unstallation
Do not apply power to the product before completing installation.  Do not put object on the product.  Do not unscrew screws or housing, please contact qualified professionals to maintain.
4．Environment
This series product should be installed in a cool, dry place away from direct sunlight,
inflammable, explosive substances and etc.
Please keep the sound ventilation.  Do not allow the water and other liquid falling into the device, (IP67)  Do not shoot light object, no matter the dome is in use or not, or the image may be blur or
unclear.
2
1 Features and Functions
1.1 General Introduction
This series speed dome product is an integrated high intelligent speed dome. It adopts water drop configuration design for the first time and has small and delicate shape. This is a digital and intelligent product of vivid video. The installation is convenient.
These series product external ports adopt the PTZ to realize the quick installation. There is waterproof interface for the pipe thread. All of these make the installation easier. It supports various languages and protocol auto recognition. It supports 360° continuously pan, 92°tilt and 180° auto flip. It can realize no blind spot monitor.
This series product can be widely used in remote monitor environment such as electric power, customs, water conservancy, banking sector and etc.
1.2 Features
This series speed dome has the following features:
1.2.1 On-Screen Menu
This series product menu supports multiple languages. It is easy for you to view dome information and configure dome, camera parameters.
1.2.2 On-screen Tips
Here you can view:
Preset number/title and system version (Software and hardware)  Dome position. (Optional. You can disable this function)
1.2.3 Support multiple protocols
This series speed dome supports universally used protocols such as DH-SD1, PELCO-P and PELCO-D. You can use various devices (such as matrix, control keyboard and DVR) and protocols to operate speed dome.
1.2.4 Proportional Pan and Tilt
This function keeps the image from moving too fast when there is a large amount of zoom. Speed dome continually decreases or increases pan and tilt speeds in proportion to depth of zoom. When zooms speed is increasing, the camera moving speed becomes slow. When zooms speed is decreasing, the camera moving speed becomes fast.
1.2.5 Preset Setup
Preset function is to save the address information (such as PTZ pan/tilt, focus and etc) to the memory so that you can quickly adjust the dome and PTZ to the correct position. This series speed dome max supports 255 presets.
1.2.6 Auto Scan
3
Camera scans back and forth regularly in a horizontal field. Here you need to set left and right limit and scan speed. You can set 5 scanning paths.
1.2.7 Auto Pattern
Memorize dome operation such as pan, tilt, and zoom to repeat. Focus and iris are in auto mode during auto pattern. For each pattern, the time should be less than 60 seconds. You can set 5 pattern paths.
1.2.8 Auto Touring
Add addresses into a routine in a desired order and then set time and stop duration for each address. The dome will begin an auto touring between these addresses. You can set 8 touring paths.
1.2.9 Auto Flip
As long as you continue to hold the keyboard joystick in the down position, the dome rotates 180 degrees and repositions itself for uninterrupted viewing of any subjects that passes directly beneath the dome.
1.2.10 Self-diagnosis
There is a self diagnosis procedure when dome boots up.
Tilt and vertical engine check  Camera diagnostics
Display dome information and diagnosis information such as address, protocol, baud
rate, type.
1.2.11 Day/Night Mode (B/W & Color Mode)
System supports auto/manual switch in low illumination. In the auto mode, the camera can automatically switch the CCD level according to the light change. In the manual mode, it can use the menu or the button to realize the color display, black and white display,
1.2.12 Auto Focus
Auto focus allows the lens to remain in focus during zoom-in, zoom-out and motion functions to get vivid image. You can use FAR or NEAR button to adjust focus manually.
1.2.13 Backlight Compensation
Balance the brightest and darkest sections of a scene to make a more vivid picture.
1.2.14 Pan Tilt and Zoom
Supports zoom in and zoom out during tilt and pan movement. In this period focus and iris are both in auto mode to get vivid image.
1.2.15 3D Intelligent Location
Working with DVR, just click part of the current scene will be displayed in the central window and automatically zooms. All of these allow you to trace precisely.
4
Power
AC 24V/1.5A（±20%）(Includes temperature control circuit)
Camera Driver Consumption
11W
Heater Consumption
12W
Decoder
Built-in
Engine
stepper motor
Preset
255( in PELCO protocol)
Auto Tour
8
Auto Pattern
5
Auto Scan
5
Information
Position， dome title, dome coordinates, and etc.
Lens
Adjust speed in accordance with lens
Auto Rotation
Tilt 92º auto rotates to pan 180 º
Auto Pan
0 º -360º continuously
Manual Pan Motion Speed
0.1º—300º/S
Preset Maximum Speed
60 º～400º/s. There are 16-level. You can set from the menu.
Manual Tilt Motion
0.1º—120º/S
Manual Tilt Scan Section
0º—180º
Control Port
RS485 BUS
Baud Rate
1200/2400/4800/9600 (Optional)
PTZ Scan Accuracy
0.06 ± 0.015º
Signal Format
PAL/NTSC (Camera mode)
S/N Ratio
> 50dB
Effective Pixel
768(H)*494(V) / 795(H)*596(V)
Horizontal Resolution
480TVL/540TVL/700TVL
Fan
Fan works continuously, heater auto controls (auto on when the temperature under 5℃)
Humidity
＜90%
Environment
-40℃—60℃（Outdoor）
1.2.16 Idle Motion
When there is no available order, you can use menu to set dome idle status after specified duration. The idle status includes turn to specified preset or go to scan, tour or pattern function.
1.2.17 Image Flip
You can enable image flip in the menu. The flip function meets more applicable requirements.
1.3 Specifications
1.3.1 Technical Specifications
5
Built-in Decode
All digital design. All data are in the connection board. No data loss when power off occurs.
Integrated design, high stability. This speed dome max support 255 presets. Support 8 auto touring.
Each touring max has 32 presets.
5 auto scan. 5 auto pattern. Each pattern can max support 400 commands and
the interval shall be less than 60s.
Built-in direction indicator. Built-in various adjustable protocols, baud rate RS485 BUS control
Built-in PTZ
Fine stepper driver, stable performance, react quickly, precisely
positioning.
Integrated design, tight structure. Elegant mechanical driver device. Support 360 degrees continuous
rotation, no monitor blind spot.
0.1°/s rotation speed while maintain stable image. 180 degrees tilt continuous monitor.
Built-in zoom lens, high sensitive, high resolution integrated digital process color camera.
Auto focus Auto iris control Auto brightness control Auto white balance Auto day/night switch
OSD
Preset title display View dome initial setup information Modify camera parameter Set preset Set auto scan Set auto pattern Set auto day/night switch (Auto B/W & color switch)
1.3.2 Performance Specifications
6
2 Address, Baud Rate and Parity setup
1 2 Baud rate
OFF
OFF
9600bps
ON
OFF
4800bps
OFF
ON
2400bps
ON
ON
1200bps
3 4 Parity
OFF
OFF
NONE
ON
OFF
EVEN
OFF
ON
ODD
ON
ON
NONE
Before you operate, you need to set address, baud rate and parity. Otherwise you can not control the product!
2.1 Address, Baud Rate and Parity Setup
Please configure the following settings before begin controlling dome:
Address
Baud rate  Parity
Note: Please reboot the speed dome to get all the setups activated!
Please note this series speed dome can automatically recognize the DH-SD, PELCO-D. PELCO-P.
Baud rate settings
Please refer to the table below for detailed information.
Table 2-1
Parity settings
Please refer to the table below for detailed information.
Table 2-2
7
Loading...
+ 25 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use