Q-See Home Security System User Manual

IR Vandal-proof Dome CCD Camera

DVR

℃

IR Vandal-proof Dome CCD Camera

CCTV SYSTEM

www.q-see.com

Digital Color CCD Camera

MANUAL

This camera uses a highly sensitive CCD

This camera uses a highly sensitive CCD and full solid-state circuitry. It offers long life,

and full solid-state circuitry. It offers long life, high reliablity and excellent image with anti-

high reliablity and excellent image with antiburn ability. It is not subject to distortion

burn ability. It is not subject to distortion caused by magnetic fields. Easy to install, it

caused by magnetic fields. Easy to install, it is an excellent choice for CCTV.

is an excellent choice for CCTV.

A. OPERATION NOTICES

（1）

Keep away from water;

（1）

Keep away from water;

（2）

Don't touch CCD with fingers,if necessary clean

（2）

Don't touch CCD with fingers,if necessary clean

and remove dust with soft cloth dipped in alcohol;

（3）

If you have questions or problems,please contact Q-see tech

（3）

If you have questions or problems,please contact Q-see tech

support at ts@dpsi-usa.com or 877-998-3440.

INSTALLATION PRECAUTIONS

（1）

Do not install the camera where it is aimed at a strong light.

（1）

Do not install the camera where it is aimed at a strong light.

（2）

Do not install the camera in a place where temperature

（2）

Do not install the camera in a place where temperature

goes above 60℃ (140°F),or there is high humidity or rain

（3）

Do not install the camera in a place where it is subjected to vibration

（3）

Do not install the camera in a place where it is subjected to vibration

or impact from other devices

（4）

Cover the CCD if the camera will not be in use for a long time.

（4）

Cover the CCD if the camera will not be in use for a long time.

：

P2P2

B. OPERATION PROCEDURES:

（1）

Remove the cap cover from top of camera.

（1）

Remove the cap cover from top of camera.

（2）

Remove C converter when using CS lens.

（2）

Remove C converter when using CS lens.

（3）

Screw on the lens.

（3）

Screw on the lens.

（4）

Connect the camera to a monitor or recording

（4）

Connect the camera to a monitor or recording

device with a 75Ω coaxial cable.

（5）

Connect the camera to 12V DC power transformer.

（5）

Connect the camera to 12V DC power transformer.

（6）

Modify the focus of lens to get an excellent image

（6）

Modify the focus of lens to get an excellent image

when image appears on the screen.

（7）

If object does not focus properly,when modifying focal length, please

（7）

If object does not focus properly,when modifying focal length, please

try the following

：

a Set the lens focal ring at unfixed.

a Set the lens focal ring at unfixed. b Focus on an object which is far

b Focus on an object which is far

away from the camera.

c Adjust the lens and focal ring to focus the

object until you get a clear image.

d Tighten the lens fix screw.

C. CONNECTION

（a）

One monitor system with one camera

CAMERA

（b）

One monitor system with two or more cameras

CAMERA

：

AC ADAPTOR

：

AC ADAPTOR

D. DRAFT

Video monitor

：

Video monitor

：

P5 P6P4

E. SPECIFICATIONS

Image Sensor

成像系

统

像素

Picture Elements

水平解析度

Horizontal Resolution

Sync System

同

步系统

Scanning system

扫描系统

Elect Shutter time

视频输出

白平衡

White Balance

Gamma

珈

玛

信噪比

S/N Ratio

Video Output

电子快门

Usable Illumination

最低照度

AGC

Lens

Power Supply

Power Consumption

Operating Temp

增益控制

Weight

：

1/3"SONY CCD

NTSC: 752 582(H)

Interlance 2:1

1.0Vp-p 750Ω BNC

1/50s~1/100000s

ON/OFF

1.0Vp-p 75Ω BNC

0.5Lux/F1.2

3mm~9mm

-20

～

+60℃(-4°F to +140°F)

625g (22oz)

480TVL

Internal

0.45

≥50dB

On/Off

DC12V

160mA

Design and specification are subject to change without prior notice. Printed in Jul.2008