Q-See FLR6000 User Manual

IR DOME SERIES

℃

IR DOME SERIES

COLOR CCD CAMERA

CCTV SYSTEM

www.q-see.com

Digital Color CCD Camera

MANUAL

This camera uses a highly sensitive CCD

This camera uses a highly sensitive CCD and full solid-state circuitry. It offers long

and full solid-state circuitry. It offers long

and full solid-state circuitry. It offers long life, high reliablity and excellent image with

life, high reliablity and excellent image with

life, high reliablity and excellent image with anti-burn ability. It is not subject to distortion

anti-burn ability. It is not subject to distortion

anti-burn ability. It is not subject to distortion caused by magnetic fields. Easy to install, it

caused by magnetic fields. Easy to install, it

caused by magnetic fields. Easy to install, it is an excellent choice for CCTV.

is an excellent choice for CCTV.

A. OPERATION NOTICES

（1）

Keep away from water;

（1）

Keep away from water;

（1）

Keep away from water;

（2）

Don't touch CCD with fingers,if necessary clean

（2）

Don't touch CCD with fingers,if necessary clean

（2）

Don't touch CCD with fingers,if necessary clean

and remove dust with soft cloth dipped in alcohol;

（3）

If you have questions or problems,please contact Q-see.

（3）

If you have questions or problems,please contact Q-see.

（3）

If you have questions or problems,please contact Q-see.

INSTALLATION PRECAUTIONS

（1）

Do not install the camera where it is aimed at a strong light.

（1）

Do not install the camera where it is aimed at a strong light.

（1）

Do not install the camera where it is aimed at a strong light.

（2）

Do not install the camera in a place where temperature

（2）

Do not install the camera in a place where temperature

（2）

Do not install the camera in a place where temperature

goes above 60℃ (140°F),or there is high humidity or rain

（3）

Do not install the camera in a place where it is subjected to vibration

（3）

Do not install the camera in a place where it is subjected to vibration

（3）

Do not install the camera in a place where it is subjected to vibration

or impact from other devices

（4）

Cover the CCD if the camera will not be in use for a long time.

（4）

Cover the CCD if the camera will not be in use for a long time.

（4）

Cover the CCD if the camera will not be in use for a long time.

：

P2P2

B. OPERATION PROCEDURES:

（1）

Remove the cap cover from top of camera.

（1）

Remove the cap cover from top of camera.

（1）

Remove the cap cover from top of camera.

（2）

Remove C converter when using CS lens.

（2）

Remove C converter when using CS lens.

（2）

Remove C converter when using CS lens.

（3）

Screw on the lens.

（3）

Screw on the lens.

（3）

Screw on the lens.

（4）

Connect the camera to a monitor or recording

（4）

Connect the camera to a monitor or recording

（4）

Connect the camera to a monitor or recording

device with a 75Ω coaxial cable.

（5）

Connect the camera to 12V DC power transformer.

（5）

Connect the camera to 12V DC power transformer.

（5）

Connect the camera to 12V DC power transformer.

（6）

Modify the focus of lens to get an excellent image

（6）

Modify the focus of lens to get an excellent image

（6）

Modify the focus of lens to get an excellent image

when image appears on the screen.

（7）

If object does not focus properly,when modifying focal length, please

（7）

If object does not focus properly,when modifying focal length, please

（7）

If object does not focus properly,when modifying focal length, please

try the following

：

a Set the lens focal ring at unfixed.

a Set the lens focal ring at unfixed. b Focus on an object which is far

b Focus on an object which is far

away from the camera.

c Adjust the lens and focal ring to focus the

object until you get a clear image.

d Tighten the lens fix screw.

C. INSTALLATION

（a）

One monitor system with one camera

（a）

One monitor system with one camera

CAMERA

（b）

One monitor system with two or more cameras

（b）

One monitor system with two or more cameras

CAMERA

：

AC ADAPTOR

F、SPECIFICATIONS

D. DRAFT

Video monitor

：

Video monitor

DVR

：

F、SPECIFICATIONS

Image Sensor

成像系

统

成像系

统

像素

Picture Elements

像素

Picture Elements

Horizontal Resolution

水平解析度

Sync System

同

步系统

同

步系统

Scanning system

扫描系统

Electronic Shutter time

视频输出

白平衡

White Balance

白平衡

White Balance

Gamma

珈

玛

珈

玛

S/N Ratio

信噪比

Video Output

电子快门

Usable Illumination

最低照度

IR LEDs Wavelength

IR LDEs Distance

红外波长

IR LEDs Amount

红外距离

IR LEDs Auto ON/OFF

红外数量

AGC

红外灯自动开关

BLC

增益控制

Mount Lens

背光

补偿

背光

补偿

Lens

镜头接口

Power Supply

镜头

Power Consumption

电源

Operating Temperature

功耗

Weight

操作温度

：

QPD308Model

1/4" Sony CCD

NTSC:512(H) 492(V)

420TVL

Internal

Interlance2:1

NTSC: 1/50s~1/100000s

ON/OFF

0.45

≥48dB

1.0Vp-p 75Ω BNC

0.5Lux/0Lux (When IR LEDs On)

850nM

14m (45ft)

23PCS

Day/Night

On/Off

C/CS

3.6mm

DC12V

-10

～

+60℃(14°F to +140°F )

-10

～

+60℃(14°F to +140°F )

200g (7oz)

Design and specifications are subject

Design and specifications are subject to change without prior notice.

to change without prior notice. Printed in April 2009

Printed in April 2009

*When IR LEDs on

P5 P6P4

*When IR LEDs on