Proel PLSUSX USER’S MANUAL

USER’S MANUAL
MANUALE UTENTE
Code PLSUSX
SUPERSIX EFFETTO MULTI LENTEA LUCE ROTANTI PLSUSX
LAMPADA 150W 24V PLLP15024(L’effetto monta doppia lampada)
Prima di collegare l’apparecchio accertarsi che sulla linea sia presente una terra adeguata alle caratteris­tiche della macchina. L’apparecchio va collegato ad una linea 230v 50/60Hz con un’erogazione di almeno 4 Amp. Scollegare l’apparecchio prima di effettuare qualsiasi operazione e quindi sincerarsi che non vi sia pre­senza di tensione. Si raccomandano le seguenti norme per un corretto funzionamento ed utilizzo:
- Non mettere in funzione l’apparecchio prima che abbia raggiunto la temperatura ambiente, onde evitare fenomeni di condensa.
- Evitare che nell’apparecchio penetrino liquidi infiammabili,acqua o oggetti metallici.
- Seguire con attenzione gli avvisi stampati e serigrafati sull’apparecchio.
- Montare la lampada evitando di toccare con le mani il bulbo.
- Il proiettore deve essere installato non superando i gradi riportati in etichetta.
- Non utilizzare in luoghi dove la temperatura sia inferiore a 0 gradi.
- Non utilizzare per lunghi periodi a temperature superiori a 40 gradi.
- Non utilizzare in luoghi soggetti a vibrazioni ,o a possibili urti.
- Effetto per lampada 150W 24V PLLP15024 non montare altre lampade che non abbiano le caratteris tiche richieste
- Portalampada GY 6.35
- Se l’effetto riducesse i fasci luminosi sincerarsi che tutte e due le lampade siano attive.
Ogni intervento di riparazione deve essere effettuato da personale qualificato e autorizzato per evitare la decadenza della garanzia che risponde dei materiali difettosi solo se non vi sono alterazioni dovute ad interventi non autorizzati.
Seguire attentamente le istruzioni del presente stampato e quanto riportato sull’etichetta applicata sul­l’apparecchio.Per un corretto funzionamento musicale si consiglia di posizionare il prodotto affinche’ il microfono posto nella parte posteriore non abbia ostacoli al ricevimento dell’impulso musicale.
NON POSIZIONARE NELLE VICINANZE DI PRESE DI CORRENTE O CASSETTE DI DERIVAZIONE ELETTRICA
IL PRODOTTO NON NASCE PER UN FUNZIONAMENTO ININTERROTTO-IL SUO FUNZIONAMENTO VA’ QUINDI ALTERNATO CON MOMENTI DI PAUSA
Caratteristiche tecniche:
Peso: 8 Kg Misure: 36x25x20 Assorbimento: 4A Codice lampada: PLLP15024
Il nostro ufficio tecnico sara’ a vostra disposizione per qualsiasi chiarimento tecnico riguardante il prodotto
2
SUPERSIX EFFECT – MULTILENS ROTATING RECTANGULAR LIGHT BEAMS MODEL PLSUSX
LAMPS 2X150W 24V MODEL PLLP15024
Before connecting check if mains has an earth connection suitable to the characteristics of the projector. The lamp should be connected to a 220/240V – 50/60 Hz cycle mains outlet, with an amperage of at least 4 A. Prior to any manual intervention on the appliance, disconnect the mains plug and check there is no pres­ence of voltage in the unit. ATTENTION: the appliance has very hot parts inside; please await its cooling down before opening. Please follow these recommendations for a correct operation:
- Do not start operating the PLSUSX before this has reached the optimal room temperature, to avoid mois ture factor.
- Avoid dipping any flammable liquid, water or metal objects inside the appliance
- Follow scrupulously the printed instructions on the label placed on the appliance.
- Mount the lamp avoiding to touch the bulb
- Projector must be installed according to the angle positioning reported on the label.
- Do not use the projector in places where temperature is below 0° C.
- Do not use the projector for long time in places where temperature is higher than 40°C.
- Do not use the projector in environments submitted to vibrations or possible impact.
- Use only two lamps of 150W 24V model PLLP15024: do not use any other lamp not matching the requested features.
- Lamp holder is GY 6,35 type.
- If the effect would reduce the light beams or be off for half part, make sure that both lamps are fully working
Any technical servicing should be effected only by qualified and authorised personnel to avoid cancelling of the warranty which operates only if there has not been any unauthorised repair.
Please strictly follow above instructions and what is printed on the label attached to the appliance. For a correct musical operation it is recommended to install the PLSUSX so that the built-in microphone placed in the back chassis is not obstructed by any object and free to receive the musical impulse.
DO NOT PLACE THE PROJECTOR NEXT TO ELECTRICAL OUTLETS OR ELECTRICAL SWITCH-BOXES THIS PRODUCT WAS NOT DESIGNED FOR CONTINUOUS OPERATION. PROJECTOR SHOULD ALWAYS
WORK WITH TEMPORARY PAUSES. Technical Specifications Weight: 8 Kg
Measures: 36x35x20 cm Consumption: 4 A Lamp code: PLLP15024
The PROEL technical department is available for any clarification concerning this product.
3
( WO R L D HE A D Q UA RT E R S - FACTO RY)
64027 SANT'OMERO (TE) - ITALY
E -mai l: in fo @p ro el gr ou p. co m
PROEL S.P.A.
Via alla Ruenia 37/43
TEL: +39 0861 81241
FAX: +39 0861 887862
w w w. p r o e l g r o u p . c o m MA D E IN I TA LY
Loading...