How it Works
Pioneer
Loading...
MXT-X376BT
Owner's Manual
24 pgs900.25 Kb0

Pioneer MXT-X376BT, MXT-X176UI Owner's Manual

COMPLETE CAR AUDIO PACKAGE CD RDS RECEIVER AND 16 cm 2-WAY SPEAKERS
MXT-X376BT MXT-X176UI
English
Owner’s Manual
Table of Contents
About this manual:
• In the following instructions, a USB memory or USB audio player are referred to as “USB device”.
• In this manual, iPod and iPhone are referred to as “iPod”.
Before You Start....................................................................................... 3
Radio.......................................................................................................... 6
USB/iPod/AUX.......................................................................................... 7
Bluetooth.................................................................................................. 8
App Mode............................................................................................... 11
Pandora®................................................................................................. 11
Settings................................................................................................... 12
FUNCTION settings .............................................................................. 12
AUDIO settings...................................................................................... 13
SYSTEM settings ................................................................................... 14
ILLUMINATION settings....................................................................... 14
MIXTRAX settings................................................................................. 14
Connections/Installation ..................................................................... 16
Additional Information ........................................................................ 20
2En
Before You Start
Speaker
SRC (source)/OFF
Detach button
Display window
M.C. (multi-control) dial
BAND/
/DIMMER Display button/
DISP OFF*2
*1
/
SRC (source)
VOLUME +/–
MUTE
DISP (display)
*
*
Thank you for purchasing this PIONEER product
To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARN ING s and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference.
WARNI NG
• Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in el ectronic equipment and automotive accessories may be dangerous a nd could expose you t o the risk of elec tric shock, in jury or other hazards.
• Do not attempt to operate the uni t while driving. Make sure to pull off the road and pa rk your vehicle
in a safe location before attempting to use the controls on the device.
CAUTION
• Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock could result. Also, damage to this unit, smoke, and overheating could result from contact with liquids.
• Always keep the volume low enough to hear outside sounds.
CAUTION
1 Do not touch the speaker flexible wire . 2 Do not change the direction of the speaker terminal assembly . 3 Make sure lead and speaker terminals do not contact metal. 4 When making connections, refer also to the instruction manual of the car stereo used.
If you experience problems
Should this unit fail to work properly, please contact your dealer or nearest authorized PIONEER Service Station.
Getting Started
Basic operation
MXT-X376BT/X176UI
*1 The button indications vary depending on the unit. *2 This button is referred to as DISP in this manual.
Remote Control
English
* MXT-X176UI has different indications for these buttons.
3En
Frequently used operations
Detach Attach
The available buttons vary depending on the unit.
Operation
Purpose Head Unit Remote Control
Turn on the power* Press SRC/OFF to turn on
Adjust the volume Turn the M.C. dial. Press VOLUME + or –.
Select a source Press SRC/OFF repeatedly. Press SRC repeatedly.
Change the display information
Return to th e previous display/list
Return to the normal display from the menu.
Answering a call Press . Press .
Ending a call Press . Press .
* When this unit’s blue/wh ite lead is connected to the vehicl e’s auto-antenna relay con trol terminal,
the vehicle’s antenn a extends when this unit’s source is turned on. To retract the anten na, turn the source off.
the power. Press and hold SRC/OFF to turn off the power.
Press DISP/DISP OFF repeat edly. Press and hold DISP/DISP OFF to turn off the display information.
Press /DIMMER. Press / to select the
Press BAND/.
Press SRC to turn on the power. Press and hold SRC to turn off the power.
Press MUTE to mute the unit. Press again to unmute.
Press DISP repeatedly.
next/previous folder.
Display indication
Indication Description
Appears when a lower tier of the menu or folder exists.
Appears when the automatic answering function is set (page 10). (Only for Bluetooth- compatible models.)
Appears when a traffic program is received.
Appears when traffic announcements are received (page 12).
Appears when the button is pressed.
Appears when the local seek tuning function is set (page 12).
Indication Description
Appears when the sound retriever function is set (page 13).
Appears when random/shuffle play is set (except when BT AUDIO is selected as the source).
Appears when repeat play is set (except when BT AUDIO is selected as the source).
Appears when the iPod control function is set (page 8).
Appears when a Bluetooth connection is made (page 8). (Only for Bluetooth-compatible models.)
Detaching the front panel
Detach the front panel to prevent theft. Remove any cables and devices attached to the front panel and turn off the unit before detaching it.
–
Important
• Avoid subjecting the front panel to excessive shock.
• Keep the front panel out of direct sunlight and high temperatures.
• Always store the detached front panel in a protective case or bag.
4En
Preparing the remote control
How to replace the battery
Insert the CR2025 (3 V) battery with the plus (+) and minus (–) poles orientated properly.
Remove the insulation sheet before use.
WARNING
• Keep the battery out of the reach of children. Should the battery be swallowed, consult a doctor
immediately.
• Do not expose the battery or remote control to excessive heat such as direct sunlight or fire.
CAUTION
• There is a potential danger of explosion if the battery is incorrectly replaced. When replacing the
battery, replace it with the same type.
• Do not handle or store the battery with metallic tools or objects.
• If the battery leaks, remove the battery and wipe the remote control completely clean. Then install a
new batter y.
• When disposing of used batteries, compliance with governmental regulations or environmental
institution s’ rules that a pply in your country/area mus t be followed that pertain to a ny special handling needed for disposal.
Important
• Do not store the remote control in high temperatures or direct sunlight.
• Do not let the remote control fall onto the floor, where it may become jammed under the brake or
accelerator pedal.
Setup menu
When you turn the ignition switch to ON after installation, [SET UP :YES] appears in the display.
1 Press the M.C. dial.
The setup menu disappears after 30 seconds of no operation. If you prefer not to set at this time, turn the M.C . dial to select [NO], then press to confirm.
2 Tur n the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.
Menu Item Description
CLOCK SET Set the clock.
FM STEP Select the FM tuning step from 100 kHz or 50 kHz.
[100], [50]
MW STEP Select the MW tuning step from 10 kHz or 9 kHz.
[10], [9]
3 [QUIT :YES] appears when all the settings have been made.
To return to the first item of the setup menu, tur n the M.C. dial to select [QUIT :NO], then press to confirm.
4 Press the M.C. dial to confirm the settings.
NOTES
• You can cancel the menu setting by pressing SRC/OFF.
• These settings can be made at any time from the SYSTEM settings (page 14) and INITIAL settings
(page 5).
Canceling the demonstration display (DEMO OFF)
1 Press the M.C. dial to display the main menu. 2 Tur n the M.C. dial to select [SYSTEM], then press to confirm. 3 Tur n the M.C. dial to select [DEMO OFF], then press to confirm. 4 Tur n the M.C. dial to select [YES], then press to confirm.
INITIAL settings
1 Press and hold SRC/OFF until the unit turns off. 2 Press the M.C. dial to display the main menu. 3 Tur n the M.C. dial to select [INITIAL], then press to confirm. 4 Tur n the M.C. dial to select an option, then press to confirm.
NOTE
The options vary depending on the unit.
English
5En
Menu Item Description
FM STEP Select the FM tuning step from 100 kHz or 50 kHz.
[100], [50]
MW STEP Select the MW tuning step from 10 kHz or 9 kHz.
[10], [9]
SP-P/O MODE Select when there is a full-range speaker connected to the rear
[REAR/SUB.W]
[SUB.W/SUB.W] Select when there is a passive subwoofer connected directly to
[REAR/REAR] Select when there are full-range speakers connected to the rear
S/W UPDATE Select to update the unit to the late st Bluetooth software. For
SYSTEM RESET Select [YES] to initialize the unit settings. The unit will be
[YES], [CANCEL]
speaker output leads and there is a s ubwoofer connected to the RCA output.
the rear speaker output leads and there is a subwoofer connected to the RCA output.
speaker output leads and RCA output. If there is a full-range speaker connected to the rear speaker output leads, and the RCA output is not used, you may select either [REAR/SUB.W] or [REAR/REAR].
details on Bluetooth software and updating, visit our website.
restarted automatically. (Some of the settings will be retained even after resetting the unit, such as Bluetooth pairing information, etc.)
Radio
Receiving preset stations
1 Press SRC/OFF to select [RADIO]. 2 Press BAND/ to select the band from [FM1], [FM2], [FM3], [MW], [SW1] or [SW2]. 3 Press a number button (1/ to 6/).
TIP
The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the FUNCTION settings (page13).
Best stations memory (BSM)
The six strongest stations are stored on the number buttons (1/ to 6/).
1 After selecting the band, press the M.C. dial to display the main menu. 2 Tur n th e M.C. dial to select [FUNCTION], then press to confirm. 3 Tur n th e M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1
After selecting the band, press / to select a station.
Press and hold / then release to seek an available station. Scanning stops when the unit receives a station. To cancel seek tuning, press / .
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 13).
To store stations manually
1
While receiving the station you want to store, press and hold one of the number buttons (1/ to 6/ ) until it stops flashing.
Using PTY functions
The unit searches for a station by PTY (program type) information.
1 Press during FM reception. 2 Tur n th e M.C. dial to select a program type from [NEWS/INFO], [POPULAR],
[CLASSICS] or [OTHERS].
3 Press the M.C. dial.
The unit begins to search for a station. When it is found, its program service name is displayed.
NOTES
• To cancel the search, press the M.C. dial.
• The program of some stations may differ from that indicated by the transmitted PTY.
• If no station is broadcasting the type of program you searched for, [NOT FOUND] is displayed for
about two seconds and then the tuner returns to the original station.
PTY list
For more details about PTY list, visit the following site: http://www.pioneer.eu/eur/products/25/121/tech/CarAudio/PTY.html
6En
USB/iPod/AUX
AUX input jack (3.5 mm stereo jack)
USB port
SRC (source)/OFF
M.C. (multi-control) dial
NOTE
If [AUX] is set to [OFF] in the SYSTEM set tings, [AUX] cannot be selected as a source.
Playing back
Disconnect headphones from the device before connecting it to the unit.
USB device/iPod
1
Open the USB port cover.
2 Plug in the USB device/iPod using an appropriate cable.
CAUTION
Use an optional Pioneer USB cable (CD-U50E) to connect the USB storage device as any device connected dire ctly to the unit will protrude out from the unit, which could be dangero us.
Before removing the device, stop playback.
MTP connection
A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using the cable supplied with the device. However, depending on the connected device and the numbers of the files in the device, audio files/songs may not be able to be played back via MTP. Note that MTP connection is not compatible with WAV file formats, and cannot be used with the MIXTRAX function.
AUX
1
Insert the stereo mini plug into the AUX input jack.
2 Press SRC /OFF to select [AUX] as the source.
Operations
You can make various adjustments in the FUNC TION settings (page 12). Note that the following operations do not work for an AUX device. To operate an AUX device, use the device itself.
Purpose Operation
Select a folder/album* Press 1/ or 2/.
Select a track/song (chapter) Press or .
Fast forward or reverse Press and hold or .
Search for a file from a list 1 Press to display the list.
View a list of the files in the selected folder/ category*
Play a song in the selected folder/category* Press and hold the M.C. dial when a folder/
Alphabetical search (iPod only) 1 Press to display the list.
Repeat play Press 6/.
Random/shuffle play Press 5/.
Shuffle all play (iPod only) Press and hold 5/.
Pause/resume playback Press 4/PAU SE.
Return to root folder (USB only)* Press and hold BAND/.
2 Turn t he M.C. dial to select the desired
file (folder) name or category, then press to confirm.
3 Turn t he M.C. dial to select the desired
file, then press to confirm. Playback starts.
Press the M.C. dial when a folder/category is selected.
category is selected.
2 Turn t he M.C. dial to select the desired
category list, then press to enter the alphabetical search mode. (Turning the M.C. dial twice also enters the alphabetical search mode.)
3 Turn t he M.C. dial to select a letter, then
press to display the alphabetical list.
To cancel alphabetical search, press /
DIMMER.
English
7En
Purpose Operation
Change drives in USB device (Devices that support the USB mass storage device class protocol only)
* Compressed audio files only
Press BAND/.
Useful functions for iPod
Link play mode
You can access songs based on the artist, album, or genre currently playing.
1 While listening to a song, press and hold to enter the link play mode. 2 Tur n the M.C. dial to select the mode ([ARTIST], [ALBUM], [GENRE]), then press to
confir m.
The selected song/album will be played after the currently playing song.
NOTE
The selected song/album may be canceled if you use functions other than those from the link play mode (e.g. fast forward and reverse).
iPod control
You can control the unit via a connected iPod. The following iPod models are not compatible with this function.
– iPod nano 1st generation, iPod with video
1 Press BAND/ during playback, then select the control mode.
[CONTROL iPod/CTRL iPod]: The unit’s iPod function can be operated from the connected iPod. [CONT ROL AUDIO/ CTRL AU DIO]: The unit’s iPod function can only be operated by the buttons on the unit or supplied remote control. In this mode, the connected iPod cannot be turned on or off.
NOTES
• Pressing iPod can also switch the control mode (only for MXT-X176UI).
• Switching the control mode to [CONTROL iPod/CTRL iPod] pauses song playback. Use the connected
iPod to resume playback.
• The following operations are still accessible from the unit, even if the control mode is set to [CONTROL iPod/CTRL iPod]. – Pause, fast forward/reverse, song/chapter selection
• The volume can only be adjusted from the unit.
About MIXTRAX (USB/iPod only)
The MIXTRAX function creates a non-stop mix of your music library, accompanied by illumination effects. For details on MIXTRAX settings, see page 14.
NOTES
• This function is not compatible with an Android device connected via MTP.
• When USB is selected as a source and the MIXTRAX function is in use, the sound retriever function is
disabled.
• Depending on the file/song, sound effects may not be available.
• Turn the MIXTRAX function off if the illumination effects it produces interfere with driving.
1 Press 3/MIX to turn MIXTRAX on/off.
Bluetooth
(Only for MXT-X376BT)
Bluetooth connection
Important
If three or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may not work properl y.
1 Turn on the Bluetooth function of the device. 2 Press and hold to display the connection menu. 3 Tur n th e M.C. dial to select [ADD DEVICE], then press to confirm.
The unit starts to search for available devices, then displays them in the device list.
• To cancel searching, press the M.C. dial.
• If the desired device is not in the list, select [RE-SEARCH].
• If there is no device available, [NOT FOUND] appears in the display.
4 Tur n th e M.C. dial to select a device from the device list, then press to confirm.
Press and hold the M.C. dial to switch the di splayed device information between the Bluetooth device address and device name.
5 Select [Pioneer BT Unit] shown in the device display. 6 Make sure the same 6-digit number appears on this unit and the device, then
select “Yes” on the device.
8En
Loading...
+ 16 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use