How it Works
Pioneer
Loading...
MXT-X186UI
Owner's Manual
28 pgs1.95 Mb0

Pioneer MXT-X386BT, MXT-X186UI, DEH-X4950BT, DEH-X3950BT Owner's Manual

COMPLETE CAR AUDIO PACKAGE DIGITAL MEDIA RECEIVER AND 16 cm 2-WAY SPEAKERS
MXT-X386BT MXT-X186UI
English
Owner’s Manual
About this manual:
Table of Contents
WAR NING
CAUTION
1 2 3 4
Speaker
Do not touch the speaker flexible wire . Do not change the direction of the speaker terminal assembly . Make sure lead and speaker terminals do not contact metal. When making connections, refer also to the instruction manual of the car stereo used.
Before You Start ......................................................................... 2
Radio ............................................................................................ 6
USB/iPod/AUX ............................................................................ 7
Bluetooth..................................................................................... 9
App Mode.................................................................................. 12
Pandora®.................................................................................... 13
Car Remote Mode.................................................................... 14
Settings...................................................................................... 15
FUNCTION settings ............................................................... 15
AUDIO settings....................................................................... 16
SYSTEM settings .................................................................... 17
ILLUMINATION settings........................................................ 18
MIXTRAX settings.................................................................. 18
Connections/Installation........................................................ 19
Additional Information........................................................... 23
• In the following instructions, a USB memory or USB audio player are referred to as “USB device”.
• In this manual, iPod and iPhone are referred to as “iPod”.
Before You Start
Thank you for purchasing this PIONEER product
To ensure proper use, please read throug h this manual before using this produc t. It is especially im portant that you read and observe WAR NING s and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference.
• Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automot ive accessories may b e dangerous and coul d expose you to the ri sk of electric shock, injury or other hazards.
• Do not attempt to operate the unit while driving. Make sure to pull off the road and park
your vehicle in a safe location before attempting to use the controls on the device.
• Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock could result. Also, damage to this unit, smoke, and overheating could result from contact with liqui ds.
• Always keep the volume low enough to hear outside sounds.
If you experience problems
Should this unit fail to work properly, please contact your dealer or nearest authorized PIONEER Service Station.
2En
English
Getting Started
SRC (source)/OFF
Detach button
Display windowM.C. (multi-control) dial
BAND/
*
DISP (display)/DISP OFF
*
/
SRC (source)
VOLUME +/– MUTE
DISP (display)
*
*
Basic operation
MXT-X386BT/X186UI
* The button indications vary depending on the unit.
Remote Control
Frequently used operations
The available buttons vary depending on the unit.
Purpose
Turn on the power* Press SRC/OFF to turn
Adjust the volume Turn the M.C. dial. Press VOLUME + or –.
Select a source Press SRC/OFF
Change the display information
Return to the previous display/list
Return to the normal display from the menu
Answering a call Press . Press .
Ending a call Press . Press .
* When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control
terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the s ource off.
Head Unit Remote Control
on the power. Press and hold SRC/OFF to turn off the power.
repeatedly.
Press DISP/DISP OFF repeatedly. Press and hold DISP/ DISP OFF to turn off the display information.
Press BAND/ . Press / to select the
Press and hold BAND/
.
Operation
Press SRC to turn on the power. Press and hold SRC to turn off the power.
Press MUTE to mute the unit. Press again to unmute.
Press SRC repeatedly.
Press DISP repeatedly.
next/previous folder.
–
* MXT-X186UI has different indications for these buttons.
3En
Display indication
Important
WAR NIN G
Detach Attach
How to replace the battery
Insert the CR2025 (3 V) battery with the plus (+) and minus (–) poles orientated properly.
Indication Description
Appears when a lower tier of the menu or folder exists.
Appears when a Bluetooth telephone is connected to this unit by HFP (Hands Free Profile) (page 9) and flashes while the telephone is on hold. (Only for Bluetooth-compatible models.)
Appears when a Bluetooth audio player is connected to this unit by A2DP (Advanced Audio Distribution Profile) (page 9). (Only for Bluetooth-compatible models.)
Appears when the button is pressed.
Appears when the local seek tuning function is set (page 15).
Appears when a traffic program is received.
Appears when the TA (traffic announcements) function is set
(page 15).
Appears when the sound retriever function is set (page 16).
Appears when random/shuffle play is set (except when BT AUDIO is selected as the source).
Appears when repeat play is set (except when BT AUDIO is selected as the source).
Appears when the iPod control function is set (page 8).
Appears when a Bluetooth connection is made (page 9). (Only for Bluetooth-compatible models.)
Detaching the front panel
Detach the front panel to prevent theft. Remove any cables and devices attached to the front panel and turn off the unit before detaching it.
• Avoid subjecting the front panel to excessive shock.
• Keep the front panel out of direct sunlight and high temperatures.
• Always store the detached front panel in a protective case or bag.
Preparing the remote control
Remove the insulation sheet before use.
• Keep the battery out of the reach of children. Should the battery be swallowed, consult a
doctor immediately.
• Do not expose the battery or remote control to excessive heat such as direct sunlight or
fire.
4En
English
CAUTION
• There is a potential danger of explosion if the battery is incorrectly replaced. When
Important
NOTES
NOTE
replacing the battery, replace it with the same type.
• Do not handle or store the battery with metallic tools or objects.
• If the battery leaks, remove the battery and wipe the remote control completely clean.
Then install a new battery.
• When disposing of used batteries, please comply with governmental regulations or environmental public institutions’ rules that apply in your country/area.
• Do not store the remote control in high temperatures or direct sunlight.
• Do not let the remote control fall onto the floor, where it may beco me jammed under the
brake or accelerator pedal.
Setup menu
When you turn the ignition switch to ON after installation, [SET UP :YES] appears in the display.
1 Press the M.C. dial.
The setup menu disappears after 30 seconds of no operation. If you prefer not to set at this time, turn the M.C. dial to select [NO], then press to confirm.
2 Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.
Menu Item Description
CLOCK SET Set the clock.
FM STEP Select the FM tuning step from 100 kHz or 50 kHz.
[100], [50]
AM STEP Select the AM tuning step from 10 kHz or 9 kHz.
[10], [9]
3 [QUIT :YES] appears when all the settings have been made.
To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO], then press to confirm.
4 Press the M.C. dial to confirm the settings.
• You can cancel the menu setting by pressing SRC/OFF.
• These settings can be made at any time from the SYSTEM settings (page 17) and INITIAL
settings (page 5).
Canceling the demonstration display (DEMO OFF)
1 Press the M.C. dial to display the main menu. 2 Tur n the M.C. dial to select [SYSTEM], then press to confirm. 3 Tur n the M.C. dial to select [DEMO OFF], then press to confirm. 4 Tur n the M.C. dial to select [YES], then press to confirm.
INITIAL settings
1 Press and hold SRC/OFF until the unit turns off. 2 Press the M.C. dial to display the main menu. 3 Tur n the M.C. dial to select [INITIAL], then press to confirm. 4 Tur n the M.C. dial to select an option, then press to confirm.
The options vary depending on the unit.
Menu Item Description
FM STEP Select the FM tuning step from 100 kHz or 50 kHz.
[100], [50]
AM STEP Select the AM tuning step from 10 kHz or 9 kHz.
[10], [9]
5En
Menu Item Description
TIP
NOTE
SP-P/O MODE Select when there is a full-range speaker connected to
[REAR/SUB.W]
[SUB.W/SUB.W] Select when there is a passive subwoofer connected
[REAR/REAR] Select when there are full-range speakers connected to
S/W UPDATE Select to update the uni t to the latest Bluetooth
SYSTEM RESET Select [YES] to initialize the unit settings. The unit will be
[YES], [CANCEL]
the rear speaker output leads and there is a subwoofer connected to the RCA output.
directly to the rear speaker output leads and there is a subwoofer connected to the RCA output.
the rear speaker output leads and RCA output. If there is a full-range speaker connected to the rear speaker output leads, and the RCA output is not used, you may select either [REAR/SUB.W] or [REAR/REAR].
software. For details on Bluetooth software and updating, visit our website.
restarted automatically. (Some of the settings will be retained even after resetting the unit, such as Bluetooth pairing information, etc.)
The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the FUNCTION settings (page 16).
Best stations memory (BSM)
The six strongest stations are stored on the number buttons (1/ to 6/).
1 After selecting the band, press the M.C. dial to display the main menu. 2 Tur n the M.C. dial to select [FUNCTION], then press to confirm. 3 Tur n the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1
After selecting the band, press / to select a station.
Press and hold / then release to seek an available station. Scanning stops when the unit receives a station. To cancel seek tuning, press / .
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 16).
Radio
Receiving preset stations
1 Press SRC/OFF to select [RADIO]. 2 Press BAND/ to select the band from [FM1], [FM2], [FM3], [AM],
[SW1] or [SW2].
3 Press a number button (1/ to 6/).
6En
To store stations manually
1
While receiving the station you want to store, press and hold one of the number buttons (1/ to 6/ ) until it stops flashing.
Using PTY functions
The unit searches for a station by PTY (program type) information.
1 Press during FM reception. 2 Tur n the M.C. dial to select a program type from [NEWS/INFO],
[POPULAR], [CLASSICS] or [OTHERS].
3 Press the M.C. dial.
English
The unit begins to search for a station. When it is found, its program service
NOTES
AUX input jack (3.5 mm stereo jack)
USB port
SRC (source)/OFF
M.C. (multi-control) dial
NOTE
CAUTION
NOTE
NOTE
name is displayed.
• To cancel the search, press the M.C. dial.
• The program of some stations may differ from that indi cated by the transmit ted PTY.
• If no station is broadcasting the type of program you searched for, [NOT FOUND] is
displayed for ab out two seconds and then the tuner retu rns to the original station.
PTY list
For more details about PTY list, visit the following site: http://www.pioneer.eu/eur/products/25/121/tech/CarAudio/PTY.html
USB/iPod/AUX
Playing back
Disconnect headphones from the device before connecting it to the unit.
2 Plug in the USB device/iPod using an appropriate cable.
To automatically switch to [USB] source w hen a USB device /iPod is connected to the unit, set [USB AUTO] to [ON] in the SYSTEM settings (page 17).
Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected direc tly to the unit will protrude out fro m the unit, which could be dangerous .
Before removing the device, stop playback.
AOA connections
For details on AOA connection, see page 14.
MTP connection
A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using the cable supplied with the device. However, depending on the connected device and the numbers of the files in the device, audio files/songs may not be able to be played back via MTP. Note that MTP connection is not compatible with WAV file formats, and cannot be used with the M IXTRAX function.
If you use an MTP connection, [ANDROID WIRED] needs to be set to [MEMORY] in the SYSTEM settings (page18).
AUX
1
Insert the stereo mini plug into the AUX input jack.
2 Press SR C/OFF to select [AUX] as the source.
USB devices (including Android)/iPod
1
Open the USB port cover.
If [AUX] is s et to [OFF] in the S YSTEM settings, [AUX] cannot be selected as a source (page 17).
Operations
You can make various adjustments in the FUNCTION settings (page 15). Note that the following operations do not work for an AUX device. To operate an AUX device, use the device itself.
7En
Purpose Operation
NOTE
NOTES
Select a folder/album* Press 1/ or 2/.
Select a track/song (chapter) Press or .
Fast forward or reverse Press and hold or .
Search for a file from a list 1 Press to display the list.
View a list of the files in the selected folder/category*
Play a song in the selected folder/ category*
Alphabetical search (iPod only) 1 Press to display the list.
Repeat play Press 6/.
Random/shuffle play Press 5/.
Shuffle all play (iPod only) Press and hold 5/.
Pause/resume playback Press 4/PAUSE .
Return to root folder (USB only)* Press and hold .
2 Tur n the M.C. dial to select the
desired file (folder) name or category, then press to confirm.
3 Tur n the M.C. dial to select the
desired file, then press to confirm. Playback starts.
Press the M.C. dial when a folder/ category is selected.
Press and hold the M.C. dial when a folder/category is selected.
2 Tur n the M.C. dial to select the
desired categor y list, then press to enter the alphabetical search mode. (Turning the M.C. dial twice also enters the alphabetical search mode.)
3 Tur n the M.C. dial to select a lette r,
then press to display the alphabetical list.
To cancel alphabetical search, press
BAND/.
Purpose Operation
Change drives in USB device (Devices that support the USB mass storage device class protocol only)
* Compressed audio files only
Press BAND/.
Useful functions for iPod
Link play mode
You can access songs based on the artist, album, or genre currently playing.
1 While listening to a song, press and hold to enter the link play mode. 2 Turn t he M.C. dial to select the mode ([ARTIST], [ALBUM], [GENRE]), then
press to confirm.
The selected song/album will be played after the currently playing song.
The selected song/album may be canceled if you use functions other than those from the link play mod e (e.g. fast forward a nd reverse).
iPod control
You can control the unit via a connected iPod. The following iPod models are not compatible with this function.
– iPod nano 1st generation, iPod with video
1 Press BAND/ during playback, then select the control mode.
[CTRL iPod]: The unit’s iPod function can be operated from the connected iPod. [CTRL AUDIO]: The unit’s iPod function can only be operated by the buttons on the unit or suppl ied remote control. In this mode, the connected iPod cannot be turned on or off.
• Pressing iPod can also switch the control mode (only for MXT-X186UI).
• Switching the control mode to [CTRL iPod] pauses song playback. Use the connected iPod
to resume playback.
8En
English
• The following operations are still accessible from the unit, even if the control mode is set
NOTES
Important
NOTES
TIP
to [CTRL iPod]. – Pause, fast forward/reverse, song/chapter selection
• The volume can only be adjusted from the unit.
About MIXTRAX (USB/iPod only)
The MIXTRAX function creates a non-stop mix of your music library. For details on MIXTRAX settings, see page 18.
• This function is not compatible with an Android device connected via MTP.
• When USB is selected as a source and the MIXTRAX function is in use, the sound retriever
function is disabled.
• Depending on the file/song, sound effects may not be available.
1 Press 3/MIX to turn MIXTRAX on/off.
Bluetooth
(Only for MXT-X386BT)
Bluetooth connection
If three or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may not work properly.
1 Turn on the Bluetooth function of the device. 2 Press to display the phone menu. 3 Turn the M.C. dial to select [BT SETTING], then press to confirm. 4 Turn the M.C. dial to select [ADD DEVICE], then press to confirm.
The unit starts to search for available devices, then displays them in the device list.
• To cancel searching, press the M.C. dial.
• If the desired device is not in the list, select [RE-SEARCH].
• If there is no device available, [NOT FOUND] appears in the display.
5 Tur n the M.C. dial to select a device from the device list, then press to
confir m.
Press and hold the M.C. dial to switch the displayed device information between the Bluetooth device address and device name.
6 Select [Pioneer BT Unit] shown in the device display. 7 Make sure the same 6-digit number appears on this unit and the device,
then select “Yes” on the device.
• [DEVICE FULL] appears if the unit has already been paired with three other devices. In this case, delete one of the paired devices. See [DEL DEVICE] or [GUEST MODE] in the Bluetooth set tings (page 9).
• Depending on the device, the PIN code is required in step 7. In this case, input [0000].
The Bluetooth connection can be also made by detecting the unit from the Bluetooth device. To do so, [VISIBLE] in the Bluetooth settings needs to be set to [ON]. For details on a Bluetooth device operations, refer to the operating instructions supplied with the Bluetooth device.
Bluetooth settings
Menu Item Description
DEVICELIST Display the list of paired Bluetooth devices. “*” appears
DEL DEVICE Delete the device information.
[DELETE YES], [DELETE NO]
ADD DEVICE Register a new device.
on the device name when the Bluetooth connection is established.
9En
Loading...
+ 19 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use