Headphones
3000 Series
TAT3215
TAT3255
User manual
Register your product and get support at
www.philips.com/support
Contents
1 |
Important safety instructions |
2 |
|
Hearing Safety |
2 |
|
General information |
2 |
|
|
|
2 |
Your Bluetooth wireless |
|
|
headset |
3 |
|
What's in the box |
3 |
|
Other devices |
3 |
|
Overview of your Bluetooth |
|
|
wireless headset |
4 |
|
|
|
3 |
Get started |
5 |
|
Charge the battery |
5 |
|
Pair the headset with your |
|
|
Bluetooth device at the Ėrst |
|
|
time |
6 |
|
Pair the headset with another |
|
|
Bluetooth device |
6 |
|
|
|
4 |
Use your headset |
7 |
|
Reconnect the headset to your |
|
|
Bluetooth device |
7 |
|
Manage your calls and music |
7 |
|
LED indicator status |
8 |
|
How to wear |
8 |
|
|
|
5 |
Factory reset the headset |
9 |
|
|
|
6 |
Technical data |
10 |
|
|
|
7 |
Notice |
11 |
|
Declaration of conformity |
11 |
|
Disposal of your old product |
|
|
and battery |
11 |
|
Compliance with EMF |
12 |
|
Environmental information |
12 |
|
Notice of complianc |
12 |
|
|
|
8 |
Frequently asked questions |
13 |
EN
1Important safety instructions
Hearing Safety
Danger
Be sure to observe the following guidelines when using your headset.
•Listen at reasonable volumes for reasonable periods of time.
•Be careful not to adjust the volume continuously upwards as your hearing adapts.
•Do not turn up the volume so high that you can't hear what's around you.
•You should use caution or temporarily discontinue use in potentially hazardous situations.
•Excessive sound pressure from earphones and headset can cause hearing loss.
•Using headset with both ears covered while driving is not recommended and may be illegal in some areas while driving.
•For your safety, avoid distractions from music or phone calls while in
environments.
General information
To avoid damage or malfunction:
Caution
About operating and storage temperatures and humidity
•The storage temperature is between -10°C to 65 °C. The operation temperature is 45°C (max.) (up to 90% relative humidity).
•Battery life may be shorter in high or low temperature conditions.
EN
2Your Bluetooth wireless headset
Congratulations on your purchase, and welcome to Philips! To fully beneĖt from the
product at www.philips. com/welcome. With this Philips wireless headset, you can:
•enjoy convenient wireless handsfree calls;
•enjoy and control wireless music
•switch between calls and music.
USB Type-C charging cable (for charging only)
Quick start guide
What's in the box
Philips True Wireless headset Philips TAT3215, TAT3255
Replaceable rubber ear caps x 2 pairs
Charging case
Other devices
A mobile phone or device (e.g. notebook, Bluetooth adapters, MP3 players etc) which supports Bluetooth and is compatible to the headset (see 'Technical data" on page 10).
EN
Overview of your Bluetooth wireless headset
1.Microphone
2.Multi-function buttons
3.LED indicator (headset)
4.USB-C charging slot
5.LED indicator (charging case)
EN
3 Get started
Charge the battery
Note
•Charging process is veriĖed by white LED lights on the earpieces.
•When the headset is fully charged,
Tip
Charging case
Connect one end of the USB cable into the charging case, and another end into the power source.
The charging case starts charging.
•Charging process is veriĖed by the blue LED light on the front panel.
•When the charging case is fully charged, the blue light goes on.
Tip
Headset
Place the headset in the charging case. The headset start charging.
Pair the headset with your Bluetooth device at the Ėrst time
Make sure that the headset is fully charged.
Take both headsets from the charging case, the headset will power on automatically, entering pairing model and Right & Left headset connected.
here will be a voice "Power on" and a voice "Pairing". Then, there will be a voice" Right channel" on right headset and "Left Channel" on left headset after paring each other.
EN