Philips FWM399/33, FWM399/22, FWM399/25, FWM399/21M, FWM399/21 User Manual

MP3-CD Mini Hi-Fi System
FW
M399
FW
M399
1
Important notes for users in the U.K.
This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows:
1 Remove fuse cover and fuse.
2 Fix new fuse which should be a BS1362 5 Amp,
A.S.T.A. or BSI approved type.
3 Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.
Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L).
As these colours may not correspond with the
colour markings identifying the terminals in your plug, proceed as follows:0 – Connect the blue wire to the terminal marked N or coloured black. – Connect the brown wire to the terminal marked L or coloured red. – Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow).
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.
Italia
DICHIARAZIONE DI CONFORMITA’
Si dichiara che l’apparecchio FW M399 Philips risponde alle prescrizioni dell’ar t. 2 comma 1 del D.M. 28 Agosto 1995 n. 548.
Fatto a Eindhoven
Philips Consumer Electronics
Philips, Glaslaan 2
5616 JB Eindhoven, The Netherlands
Norge
Typeskilt finnes på apparatens under side.
Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten.
For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn eller fuktighet.
CAUTION
Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Copyright in the U.K.
Recording and playback of material may require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.
2
4 3
*
5
£
1 2
3
4 5
6 7
8 9 0
!
5
% ∞
§ # 8
6
º ª
9
• ^ ≥
¡
)
(
*
& ^
%
$ # @
3
3
DK
Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling.
Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet. Den indbyggede netdel er derfor tilsluttet til lysnettet så længe netstikket sidder i stikkontakten.
S
Klass 1 laseraparat Varning! Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1.
Observera! Stömbrytaren är sekundärt kopplad och bryter inte strömmen från nätet. Den inbyggda nätdelen är därför ansluten till elnätet så länge stickproppen sitter i vägguttaget.
SF
Luokan 1 laserlaite
Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja roiskevedelle.
Huom. Toiminnanvalitsin on kytketty toisiopuolelle, eikä se kytke laitetta irti sähköverkosta. Sisäänrakennettu verkko­osa on kytkettynä sähköverkkoon aina silloin, kun pistoke on pistorasiassa.
(for tuner installation)
4
Index
English ------------------------------------------------ 6
Français -------------------------------------------- 30
Español --------------------------------------------- 56
Deutsch --------------------------------------------- 81
Nederlands -------------------------------------- 108
Italiano -------------------------------------------- 134
Svenska ------------------------------------------- 160
English
Français
EspañolDeutschNederlandsItalianoSvenskaDanskSuomi
Dansk --------------------------------------------- 184
Suomi --------------------------------------------- 210
Português ---------------------------------------- 234
EППЛУИО¿----------------------------------------- 259
Português
EППЛУИО¿
5
Contents
English
General Information
Supplied accessories ............................................ 7
Acknowledgement ............................................... 7
Environmental information ................................ 7
Safety information ................................................ 7
Preparations
Rear connections ............................................. 8–9
Optional connection ........................................... 9
Inserting batteries into the remote
control .................................................................... 9
Controls
Controls on the system and remote
control ........................................................... 10–11
Power Antennas connection Speakers connection
Connecting other equipment to your system
Radio Reception
Tuning to radio stations .................................... 19
Storing preset radio stations .................... 19–20
Automatic preset programming Manual preset programming
Tuning to preset radio stations ....................... 20
RDS ................................................................ 20–21
Setting the RDS clock
NEWS ................................................................... 21
Tape Operation/Recording
Loading tape ........................................................ 22
Playing tapes ........................................................ 23
Rewinding/Fast forwarding ............................... 23
General information on recording ................. 23
Preparation for recording ................................ 23
One touch recording......................................... 23
CD Synchronised start recording .................. 24
Dubbing tapes ..................................................... 24
Basic Functions
Plug and Play ........................................................ 12
Demonstration mode ........................................ 13
Switching the system on ................................... 13
Switching the system to standby mode ........ 13
Switching the system to Eco Power
standby mode ...................................................... 13
Dim mode ............................................................ 13
Volume control ................................................... 14
Sound navigation.......................................... 14–15
MAX sound VEC (Victual Environment Control) DSC (Digital Sound Control) DBB (Dynamic Bass Boost) Incredible Surround
CD/MP3-CD Operations
Discs for playback .............................................. 16
About MP3 disc .................................................. 16
Loading discs ....................................................... 16
Playing discs ......................................................... 17
Replacing discs during playback ...................... 17
Selecting a desired track/passage.................... 17
Selecting a desired Album/Title
(MP3 disc only) ................................................... 17
Repeat play .......................................................... 18
Programming the disc tracks ........................... 18
Erasing the programme ..................................... 18
External Sources
Listening to external sources .......................... 24
Clock/Timer
View clock............................................................ 25
Clock setting ....................................................... 25
Timer setting ....................................................... 26
To deactivate the TIMER To activate the TIMER
Sleep timer setting ............................................. 26
Specifications ........................................... 27
Maintenance.............................................. 28
Troubleshooting ............................. 28–29
6
General Information
This product complies with the radio interference requirements of the European Community.
Supplied accessories
– 2 speaker boxes – remote control – batteries (two AA size) for remote control – AM loop antenna – FM wire antenna – AC power cord
Acknowledgement
Energy Star
As an ENERGY STAR Partner, Philips has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
R
R
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).
Your system consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Safety information
Before operating the system, check that the
operating voltage indicated on the typeplate (or the voltage indication beside the voltage selector) of your system is identical with the voltage of your local power supply. If not, please consult your dealer.
Place the system on a flat, hard and stable
surface.
Place the system in a location with adequate
ventilation to prevent internal heat build-up in your system. Allow at least 10 cm (4 inches) clearance from the rear and the top of the unit and 5 cm (2 inches) from each side.
The ventilation should not be impeded by
covering the ventilation openings with items, such as newspapers, table-cloths, cur tains, etc.
Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources caused by heating equipment or direct sunlight.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
No objects filled with liquids, such as vases, shall
be placed on the apparatus.
The lens may cloud over when the system is
suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the system in the warm environment until the moisture evaporates.
The mechanical par ts of the set contain self-
lubricating bearings and must not be oiled or lubricated.
When the system is switched to Standby
mode, it is still consuming some power. To disconnect the system from the power supply completely, remove the AC power plug from the wall socket.
English
7
Preparations
English
FM wire antenna
AUX/ CDR
IN
LR
speaker
AM ANTENNA
(right)
+
R
— —
L
+
SPEAKERS 6
Rear connections
The type plate is located at the rear of the system. For users in the U.K.: please follow the instructions on page 2.
AM loop
antenna
FM AERIAL
75
AC
MAINS
B Antennas Connection
Connect the supplied AM loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception.
AM Antenna
speaker
(left)
AC power cord
A Powe r
Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made.
WARNING! – For optimal performance, use only the original power cable. – Never make or change any connections with the power switched on.
To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it (not available for all versions).
8
Fix the claw to the slot
Position the antenna as far as possible from a TV,
VCR or other radiation source.
Preparations
FM Antenna
For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA terminal.
C Speakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS terminals, right speaker to "R" and left speaker to "L", coloured (marked) wire to "+" and black (unmarked) wire to "-".
1
Fully inser t the stripped por tion of the speaker
wire into the terminal as shown.
Notes: – For optimal sound performance, use the supplied speakers. – Do not connect more than one speaker to any one pair of +/- speaker terminals. – Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.
2
Optional connection
The optional equipment and connecting cords are not supplied. Refer to the operating instructions of the connected equipment for details.
Connecting other equipment to your system
Use a cinch cable to connect AUX/CDR IN to the analogue audio out terminals of an external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder).
Note: – If you are connecting equipment with a mono output (a single audio out terminal), connect it to the AUX/CDR IN left terminal. Alternatively, you can use a “single to double” cinch cable (the output sound still remain mono).
Inserting batteries into the remote control
Insert two batteries (Type R06 or AA) into the remote control with the correct polarity as indicated by the "+" and "-" symbols inside the battery compar tment.
English
CAUTION! – Remove batteries if they are exhausted or will not be used for a long time. – Do not use old and new or different types of batteries in combination. – Batteries contain chemical substances, so they should be disposed off properly.
9
Loading...
+ 20 hidden pages