Philips CID3290 User Manual

Register your product and get support at
www.philips.com/welcome	CID3290

EN User manual	3

Contents

1	Important	4
	Safety	4
	Notice	4

2 Your in-car entertainment system		5
	Introduction	5
	What’s in the box	6
	Overview of the main unit	7

3	Get started	8
	Install the car audio	8
	Turn on	10
	Set date and time	10
	Adjust screen	11

4	Use map	12
	Upgrade the map	12

5	Listen to radio	12
	Tune to a radio station	12
	Store radio stations in memory	13
	Tune to a preset station	13

6	Play	14
	Load discs	14
	Connect USB device	14
	Insert USB or SD/MMC card	14
	Play/Pause	15
	Skip/search	15
	Direct select	15
	Repeat one/all	16
	Repeat a section	16
	Random play	16
	Select audio language	16
	Select audio mode	17
	Select subtitle language	17
	Rotate pictures	17
	Zoom	17
	Select slide show duration	17

7 Play with Bluetooth device	18
Pair the Bluetooth-enabled devices	18
Make a call	18
Receive call	19
Listen to music from Bluetooth device	19
Adjust Bluetooth settings	20

8 Adjust sound	20
Adjust volume	20
Mute	20
Select preset equalizer	20
Adjust fader/balance	21
Set Dynamic Bass Boost (DBB)	21

9 Adjust settings	22
Display system setup menu	22
Adjust general settings	22
Adjust sound settings	23
Adjust video settings	24
Adjust Bluetooth settings	24
Adjust language settings	25
Adjust volume settings	26
Adjust DVD rating	26

10 Others	27
Listen to other devices	27
Reset	27
Replace fuse	27

11 Product information	28
General	28
Disc player	28
Radio	28
LCD	28
Bluetooth	29

12	Troubleshooting	30
	About Bluetooth device	30

13	Glossary	31

English

EN 3

1 Important

Safety

•Read and understand all instructions before you use the apparatus. If damage is caused by failure to follow instructions, the warranty does not apply.

•Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

•This unit is designed for negative ground (earth) 12 V DC operation only.

•To reduce the risk of traffic accident, do no watch video during driving.

•To ensure safe driving, adjust the volume to a safe and comfortable level.

•Improper fuses can cause damage or fire. When you need to change the fuse, consult a professional.

•Use only the supplied mounting hardware for a safe and secure installation.

•To avoid short circuit, do not expose the apparatus to rain or water.

•Never insert objects into the ventilation slots or other openings on the apparatus.

•Never place any objects other than discs into the disc tray/slot.

•Visible and invisible laser radiation when open. Avoid exposure to beam.

•Risk of damage to the screen! Never touch, push, rub or strike the screen with any object.

•Never use solvents such as benzene, thinner, cleaners available commercially, or anti-static sprays intended for discs.

•Clean the apparatus with soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the apparatus.

•The apparatus shall not be exposed to dripping or splashing.

•Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).

Notice

The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes.

“DivX, DivX” Certified, and associated logos are trademarks of DivX, Inc. and are used under license.

Offical DivX® Certified product. Plays all versions of DivX® video (including DivX® 6) with standard playback of DivX® media files. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth

SIG, Inc. and any use of such marks by Philips is under license.

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Other trademarks and trade names are those of their respective owners.

4 EN

This apparatus includes this label:

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene

(bags, protective foam sheet.)

Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of

packaging materials, exhausted batteries and old equipment.

Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment.

Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.

2 Your in-car
2 Your in-car
entertainment	English
system

Congratulations on your purchase, and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Introduction

With the car entertainment system, you can

•Quickly found routine through the navigation system

And you can also enjoy:

•Audio/video/JPEG pictures from

•DVD, VCD or CD

•USB devices

•SD/SDHC/MMC cards

•External devices

•FM or AM (MW) radio

•Audio from Bluetooth-enabled devices

Besides, you can make/receive phone calls with

Bluetooth-enabled devices.

EN 5

What’s in the box

Check and identify the contents of your package:

AMain unit

BISO wire

CCDC/camera cable

DAV OUT cable

ECMMB connector

F16 pin connector

GGPS antenna

HCleaning cloth

IPrinting material (include User manual, Quick start guide)

6 EN

Overview of the main unit

	n	c
	m	d
	l	e
	l	f
		f

English

A Disc slot

•Eject disc.

k
j	g
j
i	h
i

HSD card slot

IRESET

• Reset the unit when it hangs up.

CFM/AM

•Switch to the FM/AM source.

DDISC

•Switch to disc playing mode.

•Answer phone call.

FDISP//

•Adjust screen brightness.

•Turn on/off the screen display.

GMap card slot

•Open the cover to insert USB device.

KAV IN

•External equipment audio/video in socket.

LVOL +/-

•Adjust volume.

MNAVI

•Enter the GPS navigation system or exit.

EN 7

NMENU

•Return to the home menu.

OBuilt-in microphone

P/MUTE

•Turn the unit on or off.

•Turn mute on or off.

3 Get started

Caution

•• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence.

Install the car audio

These instructions are for a typical installation.

However, if your car has different requirements, make the corresponding adjustment. If you have any questions regarding installation kits, consult your Philips car audio dealer.

Caution

•• This unit is designed for negative ground (earth) 12 V DC operation only.

•• Always install this unit in the car dashboard. Other locations can be dangerous as the rear of the unit heats up during use.

•• To avoid short-circuit: before you connect, ensure that the ignition is off.

•• Ensure that you connect the yellow and red power supply leads after all other leads are connected.

•• Ensure that all loose leads are insulated with electrical tape.

•• Ensure that the leads do not get caught under screws orin parts that will move (e.g. seat rail).

•• Ensure that all ground (earth) leads are run to a common ground (earth) point.

•• Use only the supplied mounting hardware for a safe and secure installation.

•• Improper fuses can cause damage or fire. When you need to change the fuse, consult a professional.

8 EN

Note on the power supply lead (yellow)

•When you connect other devices to this system, ensure that the rating of the car circuit is higher than the total fuse value of all the connected devices.

Notes on speaker connection

•Never connect speaker wires to the metal body or chassis of the car.

•Never connect speaker wires with stripes to one another.

Mount in the dashboard

Note

•• Check wire connection before you mount the unit into a car.

•• If preset radio stations are lost when the ignition key is turned OFF and then back ON, reconnect the red leads crosswise to the yellow ones.

1 If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery.

• If you disconnect the car battery in a car that has an on-board drive or navigation computer, the computer may lost its memory.

• If the car battery is not disconnected, to avoid short-circuit, ensure that bare wires do not touch each other.

2 Take out the original car audio and keep the screws.

3 Take off the mounting brackets from the original car audio and mount them onto this car audio system.

4	Connect wires (see “Connect wires”
4	Connect wires (see “Connect wires”
5	section).	nglish
5	Slide the unit into the dashboard until a	nglish
	click sound is heard.	E

6 Fix the unit onto the dashboard with screws.

7 Reconnect the negative terminal of the car battery.

Connect wires

Caution

•• Ensure that all loose leads are insulated with electrical tape.

EN 9

1 Check the car’s wiring carefully, then do the other connections:

			Yellow	Green	Blue
	Red	Black	Yellow
						b
Blue/white	Pink		Green/white	White/ brown	Orange/	Brown/
						c
					white	black

Gearbox

Red

White

Yellow

White

Red

AV system

AUX

Yellow

Rear display

Yellow

Rear display

Radio antenna

GPS antenna

Optional accessory

White

Red

White

Red

Brown

Amplifier

Turn on

Caution

•• Risk of road accidents! Never watch video or adjust settings while you drive.

1 Press to turn on the unit.

»» The available OSD (On-Screen Display) languages are displayed.

2 Tap a language to select.

»» The OSD language is changed to the selected language immediately.

•To turn off the unit, press for 3 seconds.

Set date and time

1 Press MENU.

»» The main menu is displayed.

10 EN

+ 23 hidden pages