PHILIPS 32HFL3330, 37HFL3330 User Manual [ch]
Register your product and get support at
www.philips.com/welcome
EN USER MANUAL
ZH 用户手册
32PFL3403
37PFL3403
42PFL3403
47PFL3403
32HFL3330
37HFL3330
EN-1
ENGLISHFRANÇAISE
ESPAÑOL
Know these
safety symbols
This “bolt of lightning” indicates
uninsulated material within your unit
may cause an electrical shock. For the
safety of everyone in your household,
please do not remove product covering.
The “exclamation point” calls attention
to features for which you should read
the enclosed literature closely to prevent
operating and maintenance problems.
WARNING: To reduce the risk of fire or electric
shock, this apparatus should not be exposed to rain
or moisture and objects filled with liquids, such as
vases, should not be placed on this apparatus.
CAUTION: To prevent electric shock, match wide
blade of plug to wide slot, fully insert.
For Customer Use
Enter below the Serial No. which is located
on the rear of the cabinet. Retain this
information for future reference.
Model No._______________________
Serial No. _______________________
Congratulations on your purchase,
and welcome to the “family!”
Dear PHILIPS product owner:
Thank you for your condence in PHILIPS. We’ll
do everything in our power to keep you happy with
your purchase for many years to come.
CA UTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Welcome
EN-2
ENGLISHFRANÇAISEESPAÑOL
Important safety instructions1.
Read before operating equipment
Read and keep these instruc tions.
Heed all warnings.
Follow all instructions .
Do not insert any strange object into the ventilatio n slots.
This might lead to dam age of the TV.
Do not use this ap paratus ne ar water.
Clean only with a dry cloth.
Do not block any of the ventilat ion opening s.
Inst all in accordance wit h the manufacturers instructions.
Do not install near any heat sources such as radiat ors, h eat
registers , stoves, or other apparatus (including ampl ier s)
that produce heat.
Do not defeat the safe ty purpose of the pol arized or
grounding-type p lug. A polarized plug has two blade s with
one wider than the other. A grounding type plug has two
blade s and third grounding prong. The wide bl ade or third
prong are provided for your safety. When the provided
plug does not t into your outlet, consult an electrician for
replacement of the o bsole te out let .
Protect the power cord from being walked on or pinched
particularly at p lugs , convenience receptacles, and the
point where they exit from the apparatus.
Only use attachme nts/accessories specied by the
manufacturer.
Use only with a c art , stand, tripod , bracket, or
table specied by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/ap paratus combination to
avoid injury from tip-over.
Unplu g this appar atus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualied service per sonne l. Servicing
is required when the appar atus has been damaged in any
way, such as power- supply cord or plug is damage d, liquid
has been spilled or ob ject s have fa llen into apparatus, the
apparatus has been exposed to r ain or mo isture, does not
operate normally, or has been dropped.
This product m ay cont ain lead or mercury. Disposa l of
these m aterials may be regulated due to environment al
consid erat ions. For dis posal or recycling information ,
please cont act your local authorities or the Electronic
Indus trie s Alliance: ww w.eiae .org.
Damage Requiring Service - The appliance should be
serviced by quali ed ser vice person nel when:
A. The power supply cord or the plug has been damaged;
B. Objects have fallen, or liquid has been spilled into the
appliance;
C. The a ppliance ha s been exposed to rain
D. The appliance does not appear to operate norm ally or
exhibits a marked ch ange in performance;
E. The appliance ha s been droppe d, or the enclosure
damaged.
Tilt /Stability - All televisions must comply with
recommended international global s afet y standards for tilt
and stability properties of i ts cabinet design.
• Do not com promise these design sta ndard s by applying
excessive pull force to the front, or t op, of t he cabinet
which could ultimat ely overturn the product.
• Also, do not endanger yourself, or children, by placing
electronic equip ment /toys on the top of the c abinet. Such
items could un suspectingly fall from the top of the set and
cause product dama ge and/or personal injury.
Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
Power Lines - An outdoor a ntenna should be located away
from powe r lines.
Outdoor Antenna G rounding - If an outside antenna is
connected to the receiver, be sure the antenn a syst em is
grounded so as to provide some protect ion against voltage
surges and built up st atic charges.
Objec t and Liquid Entry - C are should be t aken so t hat
objec ts do not fall and liquids are not spilled int o the
enclosure through openings.
Battery U sage C AUTION - To prevent battery leakage
that may result in bodily injury, propert y damage, or
damage to the unit:
Install all batteries correctly, with + and - aligned as •
marked on the unit.
Do not mix batteries (old and new or carbon and •
alkaline, etc.).
Remove batteries when the unit is not used for a long •
time.
For ventilation, leave at le ast 4” t o 6” free all around the
TV. Do not pl ace the TV on a carpet.
The equipment shal l not be exposed to dripping or splashing.
The equipment shal l not be exposed to rain or moisture
and objects lled with liquids , such as vases, shall be placed
on the ap paratus.
The app aratus must be connected to a mains socke t outlet
with a protected ea rthed connection.
The appliance coupler is used as the disconnect device of
this apparatus, the disconne ct device shall remain read ily
operable.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
EN-3
2008 © Koninklijke Philips Electronics
N.V. All rights reserved. Specications
are subject to change without notice.
Trademarks are the property of
Koninklijke Philips Electronics N.V. or
their respective owners.
Philips reserves the right to change
products at any time without being
obliged to adjust earlier supplies
accordingly.
The material in this manual is believed
adequate for the intended use of the
system. If the product, or its individual
modules or procedures, are used for
purposes other than those specied
herein, conrmation of their validity
and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No
further warranty is expressed or implied.
Philips can’t be held responsible neither
for any errors in the content of this
document nor for any problems as a
result of the content in this document.
Errors repor ted to Philips will be adapted
and published on the Philips support
website as soon as possible.
Pixel characteristics
The LCD panel has a high number
of colour pixels. Although it has
effective pixels of 99.999% or more.
Black dots or bright points of light
(red, green or blue) may appear
constantly on the screen. This is a
structural proper ty of display (within
common industrial standard ) and
is not a malfunction. This does
not affect the performance of the
product.
Safety symbols
Know these safety symbols:
CA UTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This “bolt of lightning”
indicates uninsulated material
within your unit may cause an
electrical shock. For the safety
of everyone in your household, please do
not remove product covering.
The “exclamation point” calls
attention to features for
which you should read the
enclosed literature closely to
prevent operating and
maintenance problems.
If the TV is mounted on a swivel base or
swivel arm, ensure no strain is placed on
the power cord when the TV is swivelled.
Strain on the power cord can loosen
connections. This may cause arcing and
result in re.
EN-4
ENGLISHFRANÇAISEESPAÑOL
Table of contents
1. Important safety instructions . . . . . . . . . 2
2. Important . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Product information. . . . . . . . . . . . . . . . . . . . . . . 5
2.2 Screen care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.3 Environmental care. . . . . . . . . . . . . . . . . . . . . . . . 5
2.4 Regulatory notices . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.1 TV overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.2 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. Get started . . . . . . . . . . . . . . . . . . . . . . . . 7
4.1 Position the TV. . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.2 Wall mount the TV. . . . . . . . . . . . . . . . . . . . . . . . 7
4.3 Install the remote control batteries . . . . . . . . . . 8
4.4 Connect the antenna or cable. . . . . . . . . . . . . . . 8
4.5 Switch on the TV . . . . . . . . . . . . . . . . . . . . . . . . . 9
5. Use your TV . . . . . . . . . . . . . . . . . . . . . . 10
5.1 Switch your TV on/off or to standby. . . . . . . . . 10
5.2 Watch TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.3 Watch channels from a cable receiver box . . . . 11
5.4 Watch a DVD. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6. Use more of your TV . . . . . . . . . . . . . . . 12
6.1 Remote control overview . . . . . . . . . . . . . . . . . 12
6.2 Use teletext of the remote control. . . . . . . . . . 12
6.3 Use install menu. . . . . . . . . . . . . . . . . . . . . . . . . 13
6.4 Change picture and sound settings . . . . . . . . . . 14
6.5 Use Smart mode . . . . . . . . . . . . . . . . . . . . . . . . 14
6.6 Set the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6.7 Set the sleeptimer . . . . . . . . . . . . . . . . . . . . . . . 16
6.8 Reduce the NR. . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.9 Adjust the skin tone. . . . . . . . . . . . . . . . . . . . . . 17
6.10 Use auto lock . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.11 Use your TV as a PC monitor . . . . . . . . . . . . . . 18
6.12 Select your TV in PC mode . . . . . . . . . . . . . . . . 18
7. Connect devices . . . . . . . . . . . . . . . . . . . 19
7.1 Connection overview. . . . . . . . . . . . . . . . . . . . . 19
7.2 Select connection quality . . . . . . . . . . . . . . . . . . 20
7.3 Connect devices. . . . . . . . . . . . . . . . . . . . . . . . . 21
8. Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . 23
9. Troubleshooting . . . . . . . . . . . . . . . . . . . 24
9.1 Technical specifications . . . . . . . . . . . . . . . . . . . 25
10. Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
EN-5
ENGLISHFRANÇAISE
ESPAÑOL
Important2.
Product information2.1
The model and serial number are on the rear of the
TV and on the packaging.
This TV consumes minimal energy in standby mode
to minimise environmental impact. The active power
consumption is given on the type plate at the rear of
the TV.
Screen care2.2
Turn off and unplug the AC power cord before •
cleaning the screen.
Clean the screen with a soft, dry cloth. Do not •
use substances such as household cleaning agents
as these may damage the screen.
To avoid deformations or color fading, wipe off •
water droplets as soon as possible.
Do not touch, push, rub or strike the screen •
with hard objects as this may damage the screen
permanently.
Where possible, avoid stationary images that •
remain on-screen for extended periods of time.
If you must use stationary images, reduce the
screen contrast and brightness to avoid screen
damage.
Environmental care2.3
End of life directives - Recycling
Philips has paid a lot of attention to
producing an environmentally friendly product.
Your new TV contains several materials that can
be recycled for new uses. At the end of its life,
specialized companies can dismantle and recycle this
set. This will minimize the amount of materials being
disposed of. Please be sure to dispose of this set in
accordance with all state and local regulations.
Recycling your packaging
The packaging of this product is intended to
be recycled. Contact your local authorities for
information on how to recycle the packaging.
Disposing used batteries
The supplied batteries do not contain mercury
or cadmium. Dispose supplied and all other used
batteries according to your local regulations.
Power consumption
The TV consumes minimal energy in standby mode
to minimise environmental impact. Active power
consumption is displayed at the back of the TV.
Regulatory notices2.4
WARNING B
To reduce the risk of re or electric shock, this
apparatus should not be exposed to rain or
moisture. Objects lled with liquids, such as
vases, should not be placed on this apparatus.
EN-6
ENGLISHFRANÇAISEESPAÑOL
Your 3. TV
This section gives you an overview of commonlyused TV controls and functions.
TV overview3.1
Side controls and indicators
1
2
4
3
POWER
CHANNEL
MENU
VOLUME
5
POWER1.
CHANNEL +/-2.
MENU3.
VOLUME +/-4.
Remote control sensor/ power indicator5.
Side connectors
HDMI 2
HDMI 1
CVI 1
CVI 2
AUDIO IN
VGA
PC IN
75 Ω
L-AUDIO OUT-R
Use the TV side connectors to connect to mobile
devices such as a camera or game console. You can
also connect to the headphone.
Rear connectors
HDMI 2
HDMI 1
CVI 1
CVI 2
AUDIO IN
VGA
PC IN
75 Ω
L-AUDIO OUT-R
Cable
Use the TV rear connectors to connect to the
antenna and permanent devices such as a highdefinition disc player or DVD player.
Note D
For more information about connections, see
Section 7 Connect devices.
3.2 Remote control
1
2
3
4
5
6
7
8
9
Standby / ON1.
SOURCE2. selection
C3. olor buttons
FORMAT4. button
C5. ursor buttons
Channel selection6.
Volume selection7.
MENU button8.
OK button9.
For more information about the remote control, See
Remote control overview section.
EN-7
ENGLISHFRANÇAISE
ESPAÑOL
Get started4.
This section describes how to position and connect
your TV, and how to perform your first-time
installation.
4.1 Position the TV
WARNING B
Do not insert the power plug into the wall •
socket before all the connections are made.
Large screen TVs are heavy. Two people are •
required to carry and handle the TV.
Wherever you decide to position your TV, ensure
that you always have easy access to the AC power
cord or plug to disconnect the TV from the power.
If the TV is mounted on a swivel base or swivel arm,
ensure no strain is placed on the AC power cord
when the TV is swivelled. Strain on the AC power
cord can loosen connections. This may cause arcing
and result in fire.
For ideal viewing conditions, position the TV where
light does not fall directly on the screen.
The ideal viewing distance for watching TV is three
times its screen size.
Kensington security slot
Your TV is equipped with a Kensington Security Slot
at the back of the TV.
If you connect an anti-theft Kensington lock
(not supplied), position the TV within reach of a
permanent object that can be attached to the lock.
4.2 Wall mount the TV
Warning B
Wall mounting of the TV should only be
performed by qualied installers. Koninklijke
Philips Electronics N.V. Bears no responsibility
for improper mounting that results in accident
or injury.
Step 1 Purchase a VESA-compatible wall
bracket
Depending on the size of your TV screen, purchase
one of the following wall brackets:
TV screen
size (inches)
VESA-compatible
wall bracket type
(millimeters)
Screw type
32” 200 x 200mm Metric 6 x 10mm
37” 200 x 200mm Metric 6 x 10mm
42” 400 x 200mm Metric 6 x 10mm
47” 400 x 200mm Metric 6 x 10mm
Step 2 Remove the TV stand
Note D
These instructions are only applicable to TV
models with mounted stands. If your TV stand is
not mounted, skip to Step 3 Connect cables.
Carefully place the TV face down on a flat, stable 1.
surface that is covered by soft cloth. The cloth
should be thick enough to protect your screen.
Using a cross-head screwdriver (not supplied), 2.
unscrew the four bolts that secure the stand to
the TV.
EN-8
ENGLISHFRANÇAISEESPAÑOL
Install the remote control 4.3 batteries
A
A
A
A
A
A
Open the battery cover on the back of the 1.
remote control.
Insert the 2 batteries supplied. Make sure the 2.
+ and - ends of the batteries line up correctly.
(inside of case is marked).
Close the cover.3.
Connect the antenna or cable4.4
Connect to an antenna
HDMI 2
HDMI 1
CVI 1
CVI 2
AUDIO IN
VGA
PC IN
75 Ω
L-AUDIO OUT-R
Locate the TV ANTENNA connector on the 1.
back of the TV.
Connect one end of an antenna cable (not 2.
supplied) to the TV ANTENNA connectors. Use
an adaptor if the antenna cable does not fit.
Connect the other end of the antenna cable to 3.
your antenna outlet, ensuring that the cable is
tightly secured at both ends.
Firmly pull the stand from the bottom of the 3.
TV. Place both the stand and bolts in a secure
location for future reinstallation.
Step 3 Connect cables
Connect the antenna cable, AC power cord and all
other devices to the back of the TV as described in
the following sections and in Section 7 Connect devices.
Step 4 Secure the VESA-compatible wall
bracket to the TV
Warning B
Only use the specied bolts (M6 x 10mm)
to secure the VESA-compatible wall
bracket to your TV. The specied bolts are
designed to match the weight of your TV.
Note D
Depending on your VESA-compatible wall
bracket, you may need to separate the mounting
plate from the wall bracket for easier installation.
Refer to your VESA-compatible wall bracket
documentation for instructions.
EN-9
ENGLISHFRANÇAISE
ESPAÑOL
Connect to a cable receiver box
HDMI 2
HDMI 1
CVI 1
CVI 2
AUDIO IN
VGA
PC IN
75 Ω
L-AUDIO OUT-R
Cable Receiver Box
ANTENNA
A cable receiver box can be connected to the TV
through the following connections:
ANTENNA (75• Ω)
A/V (Composite Video and Audio)•
S-Video and Audio•
YPbPr (Component Video Input)•
HDMI•
Connect a cable receiver box through
component video input or HDMI
HDMI 2
HDMI 1
CVI 1
CVI 2
AUDIO IN
VGA
PC IN
75 Ω
L-AUDIO OUT-R
HDMI 2
HDMI 1
CVI 1
CVI 2
AUDIO IN
VGA
PC IN
75 Ω
L-AUDIO OUT-R
Cable Receiver Box
ANTENNA
Cable Receiver
Box
ANTENNA
HDMI 1
HDMI 2
AUDIO IN
PC IN
VGA
CVI 1
Pb
Pr L
R
Y
Pb
Pr
L
R
Y
CVI 2
75 Ω
L - AUDIO OUT - R
Connect the AC power cord
Warning B
Verify that your voltage corresponds with
the voltage printed at the back of the TV.
Do not insert the AC power cord if the
voltage is different.
To connect the AC power cord
AC IN
AC IN
HDMI 1
HDMI 2
Locate the power connector at the back of the 1.
TV.
The location of the power connector varies
according to TV model.
Insert the AC power cord fully into the TV 2.
power connector.
Connect the AC power cord plug to the power 3.
outlet. Ensuring that the cord is tightly secured
at both ends.
4.5 Switch on the TV
Before you switch on the TV, check that the mains
cord is properly connected. Press POWER button
at the side of the TV, or press power button on
the remote control. The TV normally takes 10-15
seconds to start up and the following screen appears
the first time you turn on the TV.
POWER
CHANNEL
MENU
VOLUME
1
2
4
3
POWER
CHANNEL
MENU
VOLUME
5
POWER
EN-10
ENGLISHFRANÇAISEESPAÑOL
Use your TV 5.
This section helps you perform basic TV operations.
Switch your TV on/off or to standby5.1
To Switch the TV on
If the standby indicator is off, press • . POWER
at the side of the TV.
If the standby indicator is on, press• . on the
remote control.
POWER
CHANNEL
MENU
VOLUME
1
2
4
3
POWER
CHANNEL
MENU
VOLUME
5
POWER
To Switch to standby
Press • . on the remote control.
To switch on from standby without the remote
control.
Press • . POWER at the side of the TV to
switch the TV off.
Press • . POWER again to switch the TV on.
To switch off
Press • . POWER at the side of the TV.
5.2 Watch TV
Switch channels
Press a number (1 to 9) or press • CH +/- on
your remote control.
Press • A/CH to return to the previously viewed
TV channel.
Note D
You can also switch channels by pressing
CHANNEL +/- at the side of the TV.
Adjust volume
Press • VOL+/- on your remote control.
Press • MUTE on your remote control to
mute the sound. Press MUTE again or press
VOL+/- to restore the sound.
Note D
You can also switch volume by pressing
VOLUME +/- at the side of the TV.
EN-11
ENGLISHFRANÇAISE
ESPAÑOL
Watch channels from a cable receiver 5.3
box
Switch on the cable receiver box. 1.
The picture from your cable receiver box might
appear automatically on your screen.
Use the remote control of your cable receiver 2.
box to select channels.
If the picture does not appear
Press 1. SOURCE repeatedly to select the
connected cable receiver box and wait a few
seconds for the picture to appear.
Press 2. OK.
Use the remote control of your cable receiver 3.
box to select channels.
Watch a DVD5.4
Insert a DVD disc in your player.1.
Press 2. Play > on the remote control of your
player.
The picture from the player might appear
automatically on your screen.
If the picture does not appear
Press 1. SOURCE repeatedly to select the correct
source and wait a few seconds for the picture
to appear.
Press 2. OK.
EN-12
ENGLISHFRANÇAISEESPAÑOL
Use more of your TV6.
This section describes the advanced features of your
TV.
Remote control 6.1 overview
1
16
15
14
13
12
11
10
2
3
4
5
6
7
8
9
. 1. POWER
Switches the TV on from standby or back to
standby.
SOURCE2.
Selects connected devices.
DUALI-II3.
Selects Mono, Stereo, Dual I, Dual II, Nicam
Mono, Nicam Stereo, Nicam Dual I, Nicam Dual
II.
Note D
The sound mode selections depend on TV
program and broadcast TV channel of that region.
FORMAT4.
Selects a picture format. See Change Picture
format section.
CURSOR BUTTONS 5. Î ï Í Æ
To navigate through the menus.
SMART MODE6.
Selects a picture setting.
CH +/-7.
Switches to the next or previous channel.
NUMBER BUTTONS 8.
Selects a channel, page or setting.
A/CH 9.
Returns to the previously-viewed channel.
STATUS/EXIT10.
Displays programme information, if available.
VOL +/-11.
Increases or decreases volume.
MUTE 12.
Mutes or restores sound.
MENU13.
Toggles the menu on or off.
OK14.
Press to activate a setting.
INCR. SURR 15.
Adds greater depth and dimension to the TV
sound.
SLEEP 16.
Sets the TV to turn itself off within a certain
time.
Use teletext of the remote control6.2
1. Teletext on/off
2. Teletext hold
Freezes the teletext page.
3. Teletext reveal/conceal
Toggles between conceal and reveal mode.
4. Teletext enlarge
Enlarges context to two times larger.
5.
These four color buttons allow you to access
the item or the page indicated by corresponding
color in teletext.
Note D
Teletext is only available in some of the Asia Pacific
TV systems.
EN-13
ENGLISHFRANÇAISE
ESPAÑOL
Use install menu6.3
This section describe how to set the language and
store the channel of the TV.
Press 1. MENU on the remote control to display
the main menu.
Press 2. Î or ï to select Install and press Æ to
enter it.
Press 3. Î or ï to highlight the item you want to
adjust and press Æ to confirm the change.
Press 4. MENU to exit.
Main control Install
Auto store
Manual store
Channel setting
Factory reset
Sound
Features
Picture
Language
Install
Summary of install settings
Language• - Select a language of your interface.
Auto store• - Automatically sets up the TV for
the broadcast or cable channels available in your
area.
Note D
Immediately after unpacking and plugging in your
new television, run the auto store function to set
up the TV for the broadcast or cable channels
available in your area. If you do not run the
auto store function to set up the channels, your
television may not operate properly.
After you have run auto store, check out the
results. Press CH +/- on the remote control and
see which channels you can select.
Remember, an antenna or cable TV signal must
first be connected to your TV.
Manual store• -
Manual store: • Activates auto search channel
frequency or press number keys to show your
desired channel frequency.
Prog. no: • Use Î or ï to adjust the channel
number in the manual store menu.
Finetune: • Manually fine tunes analogue
channels when reception is poor.
Store: • Stores or sets the setting of manual
store menu.
Channel setting • -
Channel edit: • Sets up a favorite list of your
own with preferred TV channels.
Channel swap: • Exchange the channel. Toggle
between From, To , and Exchange.
Name edit: • Assigns or changes a channel
name to a channel for which a name has not
yet been used.
Press 1. Î or ï to edit name and press Æ to
move to the next character.
Press2. Í to confirm the first character and
press Æ to confirm the last character.
Press 3. Æ to confirm the name.
Channel sort: • Sorts or groups channels.
Factory reset • - Allows you to reset most of
the picture and sound settings to their default
factory levels. Select No or Yes.
Note D
If you reset the TV to the factory settings, all
your present setting on picture, sound, and other
feature settings will be erased and replaced by
the manufacture’s default settings. However, your
auto lock access code will not be erased.
EN-14
ENGLISHFRANÇAISEESPAÑOL
Change picture and sound settings6.4
Change picture settings
This section describes how to adjust your picture
settings.
Press 1. MENU on the remote control.
Press 2. ï or Æ to select the Picture menu.
Press 3. Î or ï to select the one of the picture
settings, and press Æ to enter the setting.
Press 4. Î or ï to adjust the setting, and press
OK to confirm the change.
Press 5. Menu to exit.
Main control Picture
Sound
Features
Install
Brightness
Color
Sharpness
Tint
Color temp
Picture format
Contrast
Picture Smart mode
Summary of picture settings
The following picture settings can be configured.
Depending on the format of the picture source, some
picture settings might not be available.
Smart mode • - Displays a list of predefined
picture and sound setting.
Contrast• - Sets the level of white in the picture.
• Brightness - Sets the brightness of the picture.
Color• - Sets the level of saturation.
Sharpness• - Sets the sharpness of fine details.
Tint• - Adjusts the color balance between red
and green.
Color temp • - Sets the color temperature to
normal, warm or cool.
Picture format• - Changes the format of the
picture.
Use 6.5 Smart mode
Press 1. SMART MODE on the remote
control to set your TV to a predefined picture
and sound setting.
Press 2. Î or ï to select one of the following
settings:
Personal • - The customized settings you defined
by using the Picture menu.
Vivid• - Vivid picture settings and clear sound for
high action.
Standard• - For normal TV viewing.
Movie• - Brilliant picture settings for a cinematic
experience.
Game• - Optimized for PCs, games consoles and
play stations.
Power saver• - Eco friendly settings for lower
power consumption.
EN-15
ENGLISHFRANÇAISE
ESPAÑOL
Change picture format
Press 1. FORMAT on the remote control to enter
the Picture format menu.
Press 2. Î or ï to select a picture format.
Super zoom•
Removes the black bars on the side of 4:3
broadcasts with minimal distortion.
4:3•
Displays the classic 4:3 format.
Movie expand 14:9•
Scales the classic 4:3 format to 14:9.
Movie expand 16:9•
Scales the classic 4:3 format to 16:9.
16:9 subtitle•
Display 4:3 pictures using the full surface of the
screen leaving the subtitles visible.
Wide screen•
Stretches the classic 4:3 format to 16:9.
Note D
Any adjustment of brightness, color, contrast •
of sharpness will be stored into personal at
smart mode section.
For 720p/1080i/1080p, the default picture •
format will be Wide screen at HD and HDMI
modes. And the picture format function will
not be accessible.
For PC mode, the default picture format will •
be Full screen and picture format function can
be accessible 4:3 and Full screen.
EN-16
ENGLISHFRANÇAISEESPAÑOL
Adjust sound settings
This section describes how to adjust sound settings.
Press 1. MENU on the remote control and press
ï to select Sound.
Main control Sound
Incredible surround
AVL
Features
Install
Picture
Equalizer
Sound
Press 2. Æ to enter the list.
Press 3. Î or ï to select one of the following
settings:
Summary of sound settings
Equalizer - • Changes the audio frequencies
with different central frequencies to create a
completely new and different sound depending
on your favorite.
Incredible surround• - Allows you to select
the modes for more spatial or surround sound
reproduction dependent on the broadcasted
signals or signals from external inputs received.
Select On or Off.
AVL (Automatic volume leveling)• - Reduces
sudden volume changes, for example, during
commercials or when switching from one
channel to another.
Select On or Off.
Set the clock6.6
This section describes how to set the time.
Press1. MENU on the remote control and select
Features > Clock.
Clock
Main control I Features
Timer
Start time
Stop time
Sleep timer
Clock
: AM
-- --
Press 2. Æ to enter the list.
Press 3. Î or ï to set the time.
(hour/minute/AM or PM)
Press 4. OK to confirm.
Set the 6.7 sleeptimer
Sleeptimer switches the TV to standby after a defined
period of time.
Press 1. MENU on the remote control and select
Features > Sleeptimer.
Sleeptimer
Main control I Features
Timer
Start time
Stop time
Clock
Sleep timer
Press 2. Æ to enter the Sleeptimer bar.
Press 3. Î or ï to set the sleep time from zero to
180 minutes. If set to zero minute, the Sleeptimer
is switched off.
Press 4. OK to activate the Sleeptimer or press
sleep button on the remote control.
Loading...