Page 1
RT3 GPS
AUDIO/TELEPHONE
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page couvA
Page 2
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page couvB
Page 3
SAFETY
WARNING
For safety reasons,
the driver must carry out
operations which require
prolonged attention when
STATIONARY.
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page couvC
Page 4
03RT3.0041 Version 5.4 Anglais
Automobiles PEUGEOT RCS Paris B 552 144 503 - Produced by iPage - Designed by 4DCONCEPT - Printed in the E.U. 09/03
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page couvD
Page 5
1
This guide is intended to make operation of the RT3 GPS audio/
telephone easy.
It introduces the basic functions of the telephone, the GPS
navigation-guidance and the spoken commands.
For radio operation, and for more detailed information about all of
the functions offered by your GPS audio/telephone, refer to your
vehicle's handbook.
Simple and quick
to use
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 1
Page 6
CONTENTS
Introduction
- The control panel 4-5
- The steering wheel control 6-7
- The main menu and the configuration
CD-ROM 8-9
Telephone
- The main functions 10-11
- Dialling a telephone number using
the numeric keypad 12-13
- Taking or refusing a call 14-15
GPS Navigation-Guidance
- Main functions 16-17
- Entering a new address and
activating guidance 18-21
- Storing a new address 22-23
Spoken commands
- Voice recognition 24
- Recalling a stored radio station 25
- Playing a track on a CD in the changer 25
- Changing the function displayed 25
- Recording a spoken description
in the directory 26-29
- Using a spoken description 30
- Spoken reading of a text message (SMS) 31
Special equipment
- The 807 additional control 32
- The colour screen: map 33-35
- The TMC RDS traffic information 36
32
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 2
Page 7
Press = on / off /
switching off of
the audio source
Rotation = volume
adjustment
CD eject (audio
or navigation)
Services menu
Press for between
2 and 8 seconds =
SIM card flap
SIM card eject
Pick up
Telephone menu
Alphanumeric
inputting keypad
Cancelling the current
operation
Press for more than 2 seconds =
clearing of the superimposed displays
Press = confirmation of the
function - menu of
the function displayed
Rotation = moving around
the menu or the screen adjustment - map zoom
1st press: displaying of
the upper band
2nd press: cutting off of
the brightness
3rd press: return to
the function displayed
Press for more than 5 seconds =
restarting of the system (Reset)
"PEUGEOT assistance"
Changing
the function
displayed
Press for more than 2 seconds =
general information
Main menu
Press for more
than 2 seconds -
Help menu
Press for
between 2 and
8 seconds =
emergency call
54
Hang up
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 4
Page 8
Radio: automatic search for a higher frequency
CD / CD changer: selection of the next track continuous press until release = fast forward playing
Selection of the next element
Selection of the previous element
Pick up - Hang up - Confirmation of the selection - Change of
sound source
Press for more than 2 seconds = displaying of the Telephone menu
INTRODUCTION
76
HANDY
HINT
Increase volume
Mute
(cutting off of the sound) =
1 and 2 simultaneously
4
Radio: automatic search for a lower frequency
CD / CD changer: selection of the previous track continuous press until release = fast reverse playing
7
6
2
Decrease volume
5
THE STEERING WHEEL CONTROL
1
3
Press
Press
Rotation
Rotation
Press behind
Press behind
Press
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 6
Page 9
INTRODUCTION
98
MAIN MENU
Press the "MENU" button to access the main
menu and select one of the following
applications:
Map* Video*
* With the colour screen only.
ConfigurationTelematics
DirectoryTrip
computer
AudioNavigation-
Guidance
Monochrome screen
Colour screen
This CD enables you to change certain parameters (male / female voice,
language).
To do this: "Configuration" menu and select the element to be
changed.
Observe the instructions written on the CD sleeve.
THE CONFIGURATION CD-ROM
HANDY
HINT
For greater ease, use
the steering wheel
control:
To move around the main menu,
use the dial on the right:
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 8
Page 10
TELEPHONE
Selection
of an element
on a menu
- When entering the PIN code, you can choose to store it by confirming the
"Store PIN" option.
You will no longer be asked to enter the PIN, if you leave the SIM card in the
holder.
- To copy the SIM card directory to the RT3 directory and vice versa:
- go to the "Directory" menu
- select "Directory files management"
- then "Exchange with the SIM card"
- finally, select the directory file(s) to be exchanged and the direction of the
exchange.
Hang up
- end of call
- refuse an
incoming call
Confirmation
of an element on
a menu
MAIN FUNCTIONS
1110
HINTS AND TIPS
Pick up
- Telephone menu:
dial
directory
list of calls
voice mail
- take an incoming call
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 10
Page 11
3
4
Dialling a telephone number using
the numeric keypad
1312
At the end of the call
Hang up
Pick up
Enter the number
1
2
HANDY HINT: call diversion
To divert a call from the RT3 to another telephone number:
- go to the "Telematics" menu
- select "Telephone functions"
- then "Telephone options", "Voice call diversion N°"
- enter the telephone number
- confirm by pressing "OK" to activate the call diversion
To deactivate or reactivate the call diversion subsequently, press the "Hang up"
button for more than 2 seconds.
or using
Confirm by
pressing
directly on
TELEPHONE
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 12
Page 12
1
3
2
1514
Taking
or refusing a call
Note: if you refuse an incoming call, it is diverted to your
voice mail.
HINTS AND TIPS
Press the end of the right-hand steering
wheel control to pick up or hang up.
A call arrives...
To find a call received or made, press the "Pick up"
button and select "List of calls".
Hang up
Pick up
Pick up
TELEPHONE
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 14
Page 13
Pressing for more than
2 seconds enables you
to listen to the last
updated spoken
guidance message again.
GPS NAVIGATION
- GUIDANCE
This contains the map data.
You can obtain updates of the map data from
your PEUGEOT dealer.
Insert the navigation CD-ROM in the drive on the
front panel and leave it there to use the
Navigation-Guidance functions.
RECALLING THE SPOKEN MESSAGE
THE NAVIGATION CD-ROM THE "CURRENT GUIDANCE" SCREEN
NAVIGATION
CD-ROM
1716
Manoeuvre
to be carried
out or
compass
Next manoeuvre to be carried out
Next road to
be taken
Current road
Estimated time of arrival at
the destination
Distance to the
final destination
During guidance, press the "MODE" button several times in succession
until the screen displays the following information:
Depending on the position of the vehicle and the reception of the GPS
information, this information may disappear from the screen temporarily.
Distance to
the next
manoeuvre
56
7
4
21 3
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 16
Page 14
3
2
4
1918
NAVIGATION-
GUIDANCE
1
Select the
Navigation-
Guidance
icon from
the main menu
The last address
entered appears
Entering a new
address and activating guidance
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 18
Page 15
Your complete address is
entered.
If you wish to store the
address, do this before
activating guidance.
If you do not, press "OK",
guidance is now activated.
- If there is any doubt about the name of the destination (there are x towns, streets, n°),
select "List" and confirm the destination chosen from the possibilities displayed.
- To be guided to the town centre, simply enter the "Town" parameter only.
- To enter the street, it is not necessary to specify the type of street (avenue, road,
boulevard...); for example, for "avenue de la Grande Armée", simply enter "grande
armée" and select "avenue de la Grande Armée" from the list.
Letter
selection
Letter
confirmation
21
20
5
6
7
Repeat these operations
to enter
the "Street"
and the "N°" (optional)
To confirm the town
Entering a new
address and activating guidance
NAVIGATION-
GUIDANCE
HINTS AND TIPS
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 20
Page 16
2322
1
2
3
Storing
a new address
The file "Harry" residing
in "London" is now
created in the directory.
Press "OK" to activate
guidance.
HANDY HINT: enter using the alphanumeric keypad
You can use the alphanumeric keypad to enter an address or a name.
For example, to enter "PARIS", press the following buttons and
select each letter one by one:
"7" (once), "2" (once), "7" (three times), "4" (three times), "7"
(four times).
Enter the name associ-
ated with the address
Letter
confirmation
NAVIGATION-
GUIDANCE
Letter
selection
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 22
Page 17
A brief press
activates or deactivates
the spoken command.
SPOKEN COMMANDS
To make a call or activate navigation to directory files, spoken descriptions
must be recorded.
To display the list of commands available on the screen,
classified by menu and sub-menu, you can either:
- say "Help" or "What can I say?",
- press the "MENU" button for more than 2 seconds.
2524
"Pardon"
=
repeat
HANDY HINT: list of commands
"Changer"
"
Disc number"
"
3
"
"Changer"
"Next track"
RECALLING A STORED RADIO STATION
PLAYING A TRACK ON A CD IN THE CHANGER
"Radio"
"Memory"
"
1
"
CHANGING THE FUNCTION DISPLAYED
"Display"
"Audio" or "Trip computer" or
"Telephone" or "Navigation" or
"Guidance"
audible signal
=
confirmation
VOICE RECOGNITION
From a pre-recorded list, you can control certain
functions of your GPS audio/telephone vocally.
The words must be spoken one by one, pausing
between each to wait for the audible confirmation
signal and displaying of the word recognised.
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 24
Page 18
4
3
Recording
a spoken description in the directory
2726
2
1
Select the
Directory icon
from the main
menu
SPOKEN
COMMANDS
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 26
Page 19
6
5
You can record
a spoken description
from an existing
directory file:
2928
SPOKEN
COMMANDS
Recording
a spoken description in the directory
9
7
“Harry”
“Harry”
8
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 28
Page 20
"Call"
"Harry"
"Call to Harry in progress"
3130
Using
a spoken description
Spoken reading
of a text message (SMS)
"Guide to"
"Harry"
"Guidance to Harry activated"
SPOKEN
COMMANDS
You can also have a stored text message read vocally, by
selecting "Text messages" from the "Telematics" menu
You can also use the spoken commands: "SMS" or
"Message", then "Read" or "Display".
When a new text message arrives, you can ask for it to be read by voice
synthesis, if this is active, by confirming "YES" on the following screen:
MAKING A CALL
GOING TO A DESTINATION
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 30
Page 21
THE COLOUR SCREEN: MAP
SPECIAL EQUIPMENT
Located next to the
gear lever, this permits
selection and
confirmation of the
functions, commands
and parameters displayed.
The colour screen permits displaying of the vehicle on a geographical map
background.
When guidance on a map is activated, you can follow your vehicle on the following screen:
“MODE”
- Brief press: changing of the function displayed
- Press for more than 2 seconds: general information
“ESC”
- Brief press: cancellation of the current operation
- Press for more than 2 seconds: clearing of the
superimposed displays
“MENU”
- Brief press: main menu
- Press for more than 2 seconds: help menu
“MUSIC” :
- Brief press: displaying of the accessible menu of
the current audio source
“TEL” :
- Brief press: pick up an incoming call,Telephone menu
“NAV”
- Brief press: displaying of the accessible menu of the
"Navigation-Guidance" function
“MAIN”
- Brief press: displaying of the general information
Selection
Confirmation
THE 807 ADDITIONAL CONTROL
33
You can also direct the map in relation to North or the vehicle, by pressing
the dial on the right and selecting "Map direction".
To enlarge or reduce the map, turn the dial on the right.
You can also use the spoken commands: "Zoom in" /
"Zoom out".
There are thirteen zoom levels from 50 m/cm to 200 km/cm.
Display: vehicle following on map
32
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 32
Page 22
The colour screen: map
The "Movement on map" display permits the selection of any location
on the map in order to:
- display the information about this location,
- be guided to this location,
- store this location in a directory file.
In all cases, you will obtain:
- either the postal address, if it is available,
- or the service if it is one,
- or if this is not available, the GPS co-ordinates.
34
To move the cursor,to select any location in this mode, use the
four direction arrows.
To display the full screen map,
press the dial on the right and
select "Full screen".
Note: if you have activated
displaying of the TMC RDS traffic
information messages, these will
be represented in the form of
symbols.
35
SPECIAL
EQUIPMENT
You can move on the map to see other areas using the following screen:
From the "Vehicle following on map" display, press the dial on
the right and select "Move the map".
To return to the "Vehicle following on map" display, press the
dial on the right and select "Exit map mode".
Note: these commands can also be accessed from the 807
additional control.
Display: movement on map
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 34
Page 23
TMC RDS
traffic information
36
SPECIAL
EQUIPMENT
You can display the TMC RDS traffic information messages irrespective of
whether your screen is monochrome or colour.
From the main "Telematics" menu, select "TMC RDS Traffic Information"
and confirm using the dial on the right.
On the "Traffic Information" menu, select "Consult messages" and confirm
using the dial on the right.
The list of available traffic
information messages is displayed.
You can also use the spoken
commands: "Traffic info", then
"Read" or "Display".
On the "Traffic Information"
menu, select "Filter the TMC
info" to display a category of
information.
Using the dial on the right, select
the message which is of interest to
you to obtain the details relating to
it.
The message is read by the voice
synthesiser automatically, if it is
active.
RT3_V5-4-ANGLAIS-ed02-03.qxd 8/12/03 11:18 Page 36
Loading...