PRODUCT SPECIFICATION |
camera solutions |
|
|
EH20 Series Enclosure
COMPACT, INDOOR/ENVIRONMENTAL, IP-ENABLED
Product Features
•Side Opening for Easy Access for Servicing and Installation
•High Reliability Die-Cast Construction
•Advanced Optics for Megapixel Camera Support
•Temperature Range from –30° to 50°C (–22° to 122°F)
•Meets IP66 and Type 4X Standards
•IK10 Mechanical Impact Resistance, Vandal Resistant
•Cable Entry Glands and Mounting Holes on Bottom of Enclosure
•24VAC or Power Over Ethernet (PoE) or Mains Power Models
•All Models Include Heater and Blower (Except EH20 and EH20-M)
•All Models Include Sun Shroud and Mount (Except EH20)
The EH20 Series is a rugged and highly reliable camera enclosure with a side-hinged lid and adjustable sun shroud designed for easy installation. Constructed from die-cast aluminum to IK10 and IP66, the EH20 Series enclosure is designed to operate in a wide range of environments and to protect electronic components in temperatures from –30° to 50°C (–22° to 122°F).
The EH20 Series enclosure is designed for use with analog and IP cameras that have both fixed and variable focal length lenses (with or without auto iris operation). The side-hinged lid provides easy access to the camera sled. Two adjustable glands (PG11) on the bottom of the enclosure allow for easy installation of the power and video cables.
All EH20 Series enclosures come standard with heater and blower (except EH20 and EH20-M), a cable management wall mount bracket, and sun shroud (except EH20). The enclosure can also be ordered from the factory with 110 to 230 VAC Mains, 24 VAC, or Power over Ethernet enclosure input voltage, 802.3af-compatible camera power, and appropriate heater and blower power.
The EH20 Series is ideal for smallto medium-size analog and IP cameras and can be mounted to Pelco’s EM20 (feedthrough wall mount).
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C4047 / Revised 9-06-18
TECHNICAL SPECIFICATIONS
MECHANICAL
Camera Mounting |
Single slot for adjustable camera positioning |
|
on camera sled |
Camera and Lens Size |
Accepts camera and lens combinations |
|
(including BNC connector) |
|
up to 22.86 x 10.16 x 7.62 cm |
|
(9.00" L x 4" W x 3.5" H) |
Viewing Window |
0.3 cm (0.118-inch) thick, high optic grade, |
|
soda lime glass |
Viewing Area |
8.89 x 7.62 cm (3.5" W x 3" H) |
Cable Entry |
2 x PG11 compression glands on bottom |
Maximum Cable Diameters |
|
PG11 |
1.00 cm (0.395 in.) |
Cable Entry Holes |
Both cable entry holes are 1.87 cm (0.74-inch) |
|
and will accept PG11 or 3/8-inch NPT conduit |
|
fitting as is. Will accept PG13.5 or |
|
1/2-inch NPT fittings if the holes are enlarged |
|
to 2.22 cm (0.88-inch). |
Lid Fastening |
Torx security screws |
ELECTRICAL
Input Power |
24 VAC or POE+, HPOE, or 110 VAC–230 VAC |
Input Voltage |
|
PoE |
IEEE802.3at compatible (heaters disabled), |
|
HPOE (heaters enabled), PoE output to camera |
24 VAC |
±10%, up to 30W (without camera), up to |
|
43W (with 13W camera), 24 VAC output to |
|
camera. |
110 VAC–230 VAC |
±10%, up to 30W (without camera), up to |
|
43W (with 13W camera), 12 VDC output to |
|
camera. |
Max Power Output to Camera |
13W |
CERTIFICATIONS*
•CE (Class A)
•ICES-003 (Class A)
•UL/cUL Listed
•UL/IEC 60950-22
•Meets Type 4X and IP66 standards
•IK10 Mechanical Impact Resistance (Mechanical enclosure only; not the front window)
•KCC
•RCM
*At the time of this publication, these certifications are pending. Consult the factory or our Web site (www.pelco.com).
GENERAL
Construction |
Die-cast aluminum, ADC10 |
|
Finish |
Alodine with gray polyester powder coat, |
|
|
RAL7047 |
|
Environment |
Indoor/environmental ambient temperature |
|
|
–30° to 50°C (–22° to 122°F) |
|
|
Power via PoE+ |
|
|
–10° to 50°C (14° to 122°F) |
|
Unit Length |
|
|
Base |
17.09 cm (6.73 in) W x 10.90 cm (4.29 in) H x |
|
|
40.57 cm (15.97 in) L |
|
Enclosure with Sunshroud |
17.09 cm (6.73 in) W x 23.96 cm (9.43 in) H |
|
and Wall Mount |
47.14 cm (18.56 in) L |
|
Weight |
Unit |
Shipping |
EH20 |
2.50 kg (5.50 lb) |
2.81 kg (6.20 lb) |
EH20-M |
2.91 kg (6.40 lb) |
3.32 kg (7.32 lb) |
EH20-2-H |
3.14 kg (6.92 lb) |
3.56 kg (7.84 lb) |
EH20-3-H |
3.43 kg (7.56 lb) |
3.62 kg (7.98 lb) |
EH20-P-H |
3.13 kg (6.90 lb) |
3.55 kg (7.82 lb) |
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
EH20 MOUNTING HOLE DIMENSIONS
5.00 |
(1.97) |
1/4 - 20 UNC |
5.00 |
(1.97) |
5.51 |
(2.17) |
15.75 |
(6.20) |
8.94 |
(3.52) |
6.22 |
(2.46) |
EM20 Wall Mount (Included)
Construction |
Aluminum |
|
Finish |
Alodine with gray polyester powder coat |
|
Weight |
Unit |
Shipping |
|
0.41 kg (0.90 lb) |
0.56 kg (1.22 lb) |
RECOMMENDED CAMERAS
Sarix®, Sarix Professional, and the Sarix Enhanced series.
EM20 MOUNTING HOLE DIMENSIONS