Pelco SD429-PG-E0, SM-BB4PG-3999, SD436-SMW-0, SD436-SMW-0-X, SD436-SMW-1 Specsheet

PRODUCT SPECIFICATION	camera solutions

Spectra® IV SE Series Dome Systems

PREMIER INTEGRATED DOME SYSTEM

Product Features

•2 Autofocus, High Resolution Integrated Camera/Optics Packages; Multiple Back Box Models

•Day/Night, 540 TVL, 128X Wide Dynamic Range (WDR), Motion Detection, and Electronic Image Stabilization (SD436 Series)

•Day/Night, 540 TVL, 128X Wide Dynamic Range (WDR), and Motion Detection (SD429 Series)

•Auto tracking

•Window Blanking

•Camera Title Overlay, 20 User-Definable Characters

•Horizontal and Zone Blanking

•On-Screen Compass and Tilt Display

•Password Protection

•Low Lux Noise Reduction

•Built-in Surge and Limited Lightning Protection

IN-CEILING MODEL	PENDANT MODEL
SD436-F0	SD429-PG-0

•Sure Focus

•Integrated Passive Unshielded Twisted Pair (UTP) Circuit

•Internal Scheduling Clock

•Ability to Add IP Network Capability by Purchasing Optional TXB-N Module

Modularity

Spectra® IV SE was designed with ease of installation and ease of maintenance in mind. Each dome system consists of three components: a back box, a dome drive, and a lower dome. These three system components are interchangeable with other Spectra IV SE dome systems, making retrofitting and application adjustments simple. Also, dome drives and lower domes can be removed and replaced reducing maintenance time.

Back Box

Spectra IV SE back box options include the following models: environmental in-ceiling (ideal for outdoor soffits), indoor in-ceiling, indoor surface mount, and standard and environmental pendant. The Spectra IV SE Series can also be ordered with heavy-duty, pressurized, and stainless steel back box options (refer to the appropriate product specification sheets for more information). Each back box model features built-in back box memory to store camera and location-specific dome settings, including labels, presets, patterns, and zones. A passive UTP circuit is located on the door assembly for convenient video transmission through twisted pair wire. For added flexibility, Pelco fiber modules can also be attached to the door assembly for transmission over single-mode or multimode fiber.

Dome Drive

The Spectra IV SE dome drive’s unique integrated optics package incorporates many advanced features that allow the system to produce high quality video in the most difficult environments. All cameras in Spectra IV SE dome drives feature LowLight™ technology allowing the cameras to compensate for scenes where minimal light is present. Both the 29X and the 36X cameras feature built-in motion detection and advanced 128X WDR that enables the system to compensate for scenes where dramatic contrasts in lighting are present. The 36X day/night camera electronic image stabilization digitally reduces blurring of the camera image due to vibration caused by external sources, such as wind and traffic. Auto sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening the edges in the picture.

Lower Dome

Special consideration was taken when designing the Spectra IV SE lower dome bubble to ensure that an optimal optical relationship between the lens and bubble was achieved, providing crystal clear video at long focal lengths.

Dome Systems

Spectra IV SE dome systems feature many software enhancements that increase performance and make configuration and operation easy. An internal scheduling clock allows for the scheduling of presets and patterns. Window blanking enables a user to configure up to eight, four-sided, user-defined privacy areas. Password protection prevents unauthorized users from changing the system settings. Configurable on-screen compass and tilt display provides positioning information when needed. Intuitive multilingual on-screen menus can be displayed in English, Spanish, Portuguese, Italian, French, German, Russian, Polish, Turkish, and Czech.

Spectra IV SE’s variable speed capabilities range from a smooth, fast pan motion of 400 degrees per second to a smooth “creep” speed of 0.1 degree per second. The system is capable of continuous 360 degrees rotation and has an “auto flip” feature that allows the dome to rotate 180 degrees and reposition itself for uninterrupted viewing of any subject that passes directly beneath the dome.

In addition, with the optional Pelco TXB-N module, you can add IP network capability at any time to a Spectra IV dome system without losing analog viewing and control. By snapping the TXB-N module into the back box, you can stream network video to a Web browser, Endura®, Digital Sentry®, or third-party software recording solution allowing integration into virtually any IP-based system.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C2448 / REVISED 2-3-14

TECHNICAL SPECIFICATIONS

CAMERA/OPTICS

	Day/Night (36X)	Day/Night (29X)
Signal Format	NTSC (DD436)	NTSC (DD429)
	PAL (DD436-X)	PAL (DD429-X)
Scanning System	2:1 Interlace	2:1 Interlace
Image Sensor	1/4-inch EXview HAD™	1/4-inch EXview HAD
Effective Pixels	768 (H) X 494 (V)	768 (H) X 494 (V)
NTSC
PAL	752 (H) X 582 (V)	752 (H) X 582 (V)
Horizontal Resolution
NTSC	>540 TV Lines	>540 TV Lines
PAL	>540 TV Lines	>540 TV Lines
Lens	f/1.4 (focal length, 3.3 ~ 119 mm)	f/1.4 (focal length, 3.4 ~ 98.6 mm)
Zoom	36X optical, 12X digital	29X optical, 12X digital
Zoom Speed (optical range)	3.2/4.6/6.6 seconds	3.2/4.6/6.6 seconds
Horizontal	57.2° at 3.3 mm wide zoom;	55.8° at 3.4 mm wide zoom;
Angle of view	1.7° at 119 mm telephoto zoom	1.7° at 98.6 mm telephoto zoom
Focus	Automatic with manual override	Automatic with manual override
Maximum Sensitivity at 35 IRE	0.55 lux at 1/60 sec (color)	0.55 lux at 1/60 sec (color)
NTSC/EIA
	0.018 lux at 1/2 sec (color)	0.018 lux at 1/2 sec (color)
	0.0048 lux at 1/2 sec (B-W)	0.0048 lux at 1/2 sec (B-W)
PAL/CCIR	0.45 lux at 1/50 sec (color)	0.45 lux at 1/50 sec (color)
	0.015 lux at 1/1.5 sec (color)	0.015 lux at 1/1.5 sec (color)
	0.004 lux at 1/1.5 sec (B-W)	0.004 lux at 1/1.5 sec (B-W)
Sync System	Internal/AC line lock, phase adjustable using remote control,	Internal/AC line lock, phase adjustable using remote control,
	V-Sync	V-Sync
White Balance	Automatic with manual override	Automatic with manual override
Shutter Speed	Automatic (electronic iris)/Manual	Automatic (electronic iris)/Manual
NTSC	1/2 ~ 1/30,000	1/2 ~ 1/30,000
PAL	1/1.5 ~ 1/30,000	1/1.5 ~ 1/30,000
Iris Control	Automatic iris control with manual override	Automatic iris control with manual override
Gain Control	Automatic/OFF	Automatic/OFF
Video Output	1 Vp-p, 75 ohms	1 Vp-p, 75 ohms
Video Signal-to-Noise	>50 dB	>50 dB
Wide Dynamic Range	128X	128X
Electronic Image Stabilization	Integrated/Selectable	—
Auto Sharpness	Integrated/Selectable	Integrated/Selectable

TECHNICAL SPECIFICATIONS

DOME DRIVE FEATURES

•256 Presets

•±0.1° Preset Accuracy

•Electronic Image Stabilization (36X model)

•Image Enhancement (36X model)

•Multilingual Menus (English, Spanish, Portuguese, Italian, French, German, Russian, Polish, Turkish, and Czech)

•RJ-45 Data Port for Software Update and Setup

•On-Screen Compass, Tilt, and Zoom Display

•400°/sec Pan Preset Speed and 200°/sec Tilt Preset Speed

•Rotating Discreet Liner with Sealed Fixed Bubble

•Window Blanking: Up to 8, Four-Sided, User-Defined Shapes

•8 Zones (configurable in size) Can Be Labeled with up to 20 Characters Each or Set to Output Blank Video

•7 Alarm Inputs

•1 Auxiliary (Form C) Relay Output and 1 Open Collector Auxiliary Output (can be alternately configured to operate upon alarm)

•Configurable Locations of Labels and On-Screen Displays

•Action on Alarm: Alarms Can Be Individually Configured for 3 Priority Levels, to Initiate a Stored Pattern, or to Go to an Associated Preset When Received

•Resume After Alarm: Allows the Dome to Return to a Previously Configured State After Alarm Acknowledgement or to its Previous Position Before Alarm

•Multiple Park and Power-Up Action

•Patterns: Up to 8, On-Screen, User-Defined Configurable Patterns; Includes Pan, Tilt, Zoom, and Preset Functions

•Proportional Pan/Tilt: Continually Decreases Pan/Tilt Speeds in Proportion to Depth of Zoom

•Variable Scan Speed: Scan Speed Can Be Configurable Between 1 to 40°/sec

•Pan Motion Allows 0.1 to 150°/sec Pan Speed

•Configurable Limit Stops for Auto/Random/Frame Scan Modes

•Autosensing Protocol (Coaxitron®, RS-422 Pelco P and Pelco D, Sensormatic®, Vicon®); Accepts Other Control Protocols with Optional Translator Card

•Digital Position and Zoom Control and Feedback through Pelco D Protocol

•Built-in Menu System for Setup of Configurable Functions

•“Auto Flip” Rotates Dome 180° at Bottom of Tilt Travel

•Configurable Zoom Speeds

•Low Lux Noise Reduction (reduces noise in low light)

WINDOW BLANKING	WIDE DYNAMIC RANGE
Window blanking allows a	The WDR setting balances the
user to configure up to	brightest and darkest sections
eight, four-sided, user-defined	of a scene to produce a picture
areas that cannot be viewed	that provides more detail.
by the operator of the dome
system. A blanked area will
move with pan and tilt
functions and automatically
adjust in size as the lens
zooms telephoto and wide.

BEFORE BEFORE

AFTER							AFTER