Panasonic UF-E1, UF-E1CN Service Manual
UF-E1
UF-E1CN
MGCS010401-C0
(Standard Version)
Facsimile
© 2001 Matsushita Graphic Communication Systems, Inc. All rights reserved. Unauthorized copying
and distribution is a violation of law.
DZSN000123-2
UF-E1 UF-E1CN
2
Contents
1 General Description..................................................................................1
1.1. Overview ........................................................................................................ 1
1.2. Fax Features and Functions .......................................................................... 1
1.3. Internet Features and Functions.................................................................... 2
1.4. Printed Features and Functions.....................................................................2
1.5. General Specifications................................................................................... 3
1.6. Scanner Specifications .................................................................................. 4
1.7. Printer Specifications ..................................................................................... 5
1.8. Print Cartridge Specification .......................................................................... 5
1.9. Power............................................................................................................. 5
1.10. Paper Specification ...................................................................................... 6
1.11. Environment................................................................................................. 6
1.12. Construction................................................................................................. 6
1.13. Function Table .............................................................................................9
2 Disassembly Instruction .........................................................................17
2.1. General Disassembly Flowchart .................................................................. 17
2.2. SC PC Board(6012), NCU PC Board(6013),
Printer I/F PC Board(4002) and Power Supply PC Board(6009)................. 18
2.3. PNL PC Board (1015), LCD Module (1014).................................................21
2.4. Feed Roller (3003), CIS (3011), ADF Roller(3006), IMD Sensor PC
Board(3017), ASF Roller (7006) ..................................................................23
2.5. PEN C PC Board(4002), RX Motor(4011), Speaker(6002),
Microphone(6017)........................................................................................ 27
2.6. Cleaning Scanning Area, ADF Roller, ASF Roller, Feed Roller................... 29
2.7. Adjusting pressure of ADF ........................................................................... 30
2.8. Replacement of ADF Separation Rubber(1025)..........................................30
3 Maintenance, Adjustments and Check Points........................................31
3.1. Required Tools ............................................................................................ 31
3.2. Periodic Maintenance Points ....................................................................... 31
3.3. Periodic Maintenance Check List................................................................. 32
3.4. Program ROM.............................................................................................. 33
3.5. ADF Pressure .............................................................................................. 34
3.6. General Circuit Diagram .............................................................................. 35
3.7. SCA PCB SC PCB....................................................................................... 36
3.8. PENC........................................................................................................... 47
3.9. PNL PCB ..................................................................................................... 54
3.10. NCU PCB................................................................................................... 56
4 Troubleshooting......................................................................................60
4.1. Initial Troubleshooting Flowchart .................................................................60
4.2. Improper LCD Display.................................................................................. 61
4.3. Information Codes (INFO. CODES).............................................................62
4.4. Printed Copy Quality Problems.................................................................... 76
4.5. Document Feeder (ADF).............................................................................. 80
4.6. Communications .......................................................................................... 83
4.7. Information Code Table ............................................................................... 87
4.8. Diagnostic Codes.........................................................................................92
i
5 Test Modes...........................................................................................101
5.1. Test Mode Table ........................................................................................101
5.2. Test Mode 0 (GPM Self Test / Printer Test) ...............................................102
5.3. Test Mode 1 (Function Parameter Setting) ................................................103
5.4. Test Mode 3 (TEST MODE 1-2 List Printout) .............................................109
5.5. Test Mode 4 (CIS TEST) ............................................................................111
5.6. Test Mode 5 (Tonal Signal & Binary Signal Generation)............................112
5.7. Test Mode 6 (RAM Initialization) ................................................................113
5.8. Test Mode 7 (DTMF Signal Generation) ....................................................114
5.9. Test Mode 9 (RAM Test) ............................................................................115
5.10. Test Mode 10 (LED/LCD Test) .................................................................116
5.11. Test Mode 11:ID No Setting .....................................................................117
5.12. Test Mode 12 (Bi-directional Alignment Test Pattern)..............................118
5.13. Test Mode 15: CIS Training .....................................................................119
5.14. Test Mode 19 (Received Files Deletion) ..................................................120
5.15. Test Mode 21 (Check Sum Calculation)...................................................121
5.16. Test Mode 25 (Adjust Pen Voltage) .........................................................122
5.17. Test Mode 26 (PPP LOG PRINT) ............................................................123
5.18. Test Mode 31 (Data Modem Signal Transmission)..................................124
6 System Description...............................................................................125
6.1. Mechanical Operation ................................................................................125
6.2. Electrical Circuit..........................................................................................129
6.3. Functions and Features..............................................................................140
6.4. F-ROM Memory Management....................................................................152
6.5. General Network Information .....................................................................153
6.6. Product Overview .......................................................................................181
6.7. Troubleshooting..........................................................................................184
6.8. Part Replacement.......................................................................................189
6.9. Troubleshooting Flowchart.........................................................................199
7 Exploded View & Parts List ..................................................................201
7.1. Suffix in the Parts List.................................................................................201
7.2. Cover & Panel Assy ...................................................................................202
7.3. TX Frame Assy...........................................................................................204
7.4. Scanner Unit...............................................................................................206
7.5. Printer Driver Assy .....................................................................................208
7.6. Harness ......................................................................................................210
7.7. Base Unit ....................................................................................................212
7.8. ASF Unit .....................................................................................................214
7.9. Printer Unit .................................................................................................216
7.10. Packing & Accessories.............................................................................218
7.11. Screw .......................................................................................................221
8 Schematic Diagram ..............................................................................222
ii
1 General Description
1.1. Overview
This section covers the features and specifications of the plain paper facsimile transceiver "Panasonic UFE1". This facsimile can transmit and receive on the Public Switched Telephone Network (PSTN) in the
modes conforming to CCITT Group 3 recommendations.
1.2. Fax Features and Functions
1. Thermal Ink-jet Printing
Clear picture quality is obtained by employing a thermal ink-jet printing method on plain paper.
2. Easy Maintenance
The thermal ink-jet printing mechanism does not require the use of a drum, a developer unit or toner.
Resulting in an easily cleaned and maintained machine.
3. A4 Scanning
A4 is the maximum document width that can be scanned and transmitted.
B4 scanning is only available in Taiwan and Chaina.
4. Automatic Document Feeder
An Automatic Document Feeder feeds originals from the document tray automatically, starting with the
bottom page.
Capacity : 20 documents (A4 size) of average thickness and of the same size.
15 documents (B4 size) of average thickness and of the same size.
5. Speedy Transmission
The use of Coding with ECM achieves faster transmissions.
Short Protocol reduces hand-shake time by shortening Phase B.
6. Error Correction Mode (ECM)
An Error Correction Mode, which conforms to ITU-T/CCITT Recommendations, allows error-free data
transmission. ECM with Coding also conforms to ITU-T/CCITT Recommendations.
7. Automatic Dialing Function
Up to 130 stations can be easily dialed by Directory Dialing or Abbreviated Dialing Function. Any other
stations can be dialed directly from the keypad by entering the full telephone number.
8. Memory Transmission
The contents of a document can be stored into the document memory first, then transmitted from
memory. Operator attendance until transmission ends is not necessary.
9. Multi-station Transmission
Using the document memory, the document can be transmitted to multiple destinations.
10. Deferred Communication
The 1 built-in 24-hour timers allow the operator to set deferred transmissions. Using the document
memory, documents can also be transmitted to multiple stations.
11. Caller ID Function (Available in only certain countries)
Caller's telephone number can be confirmed on the display before answering call. By registering
unwanted call into Blacklist, it will not ring when the caller ID matches with one registered in the Blacklist.
12. Fax/Tel Automatic Switch
This feature allows you share a single telephone line for both Fax and Voice, thus saving on the cost of
installing a second telephone line. When the machine answers an incoming call, it will automatically
distinguish whether the caller is a Fax or Voice, if it is a Fax call, the machine will receive the document. If it is a Voice call, the machine will beep for operator attention.
13. Document Memory Backup
This unit has a Flash Memory to retain the document information and machine parameters [except calendar clock and dialing information for the file(s)] permanently even when a power failure occurs.
14. Halftone
For transmission, this function ensures high quality reproduction of gray-shaded or photographic documents. This machine uses 64 levels of error diffusion to create halftones with Quality mode.
UF-E1
1
UF-E1
15. Copy Function
The Copy function allows the machine to be used as a copier. Using the document memory, up to 99
copies can be made of a single original with Reduction and Enlargement capability.
16. 32 Transaction Journal
The 32 Transaction Journal provides transaction information-number of pages transmitted or received,
start date and time, communication results, identification, etc. It is automatically printed every 32 transactions, or it can be printed manually at anytime.
17. Communication Journal
A communication journal is a result report of a communication which can be printed automatically after
communication is completed. Printout conditions can be selected for each communication to 1) not
print, 2) always print, or 3) print when communication has failed.
18. Multi-purpose LCD Display
The 16 x 1 Alphanumeric LCD display shows the operation mode, date and time, remote ID number,
and pages transmitted or received. In case of an error, the LCD display shows an information code and
error message indicating the exact cause of trouble.
19. Remote Diagnostic Function
The remote Diagnostic Function can be used to diagnose the unit remotely over the PSTN or equivalent. A new host system is required for high speed remote diagnostics to be available.
1.3. Internet Features and Functions
1. i-Fax Function
With the UF-E1 built-in e-mail capability, documents can be transmitted or received via Internet network. Documents can be transmitted to not only i-Fax machine but also Personal Computers by just
entering e-mail address.
2. E-Mail Function
E-Mail message can be received by UF-E1 and printed out automatically after it was received. UF-E1
only supports ISO-8859-1, ISO-8559-2, ISO-8559-5, ISO-8559-6, ISO-8559-7, ISO-8559-8, ISO-85599, ISO-8559-11 characters and documents embedded with such fonts.
1.4. Printed Features and Functions
UF-E1 will be served as a colour printer by just pressing [PRINTER] button. For colour printing, colour cartridge must be purchased in advance.
2
1.5. General Specifications
1. Communication Facility
Public Switched Telephone Network (PSTN)
2. Line Coupling
Direct Coupling
3. Input Level
-5 to -43 dbm (Germany version: -5 to 46 dbm)
4. Output Level
0 to -15 dbm
5. Control Procedure
ITU-T/CCITT Rec.T.30
MGCS Proprietary short protocol
6. Modem Speed
(FAX)
V.17 : 14400, 12000, TC9600, TC7200 bps (QAM with TCM)
V.34 : 33600/31200/28800/24000/21600/19200/16800/14400/
12000/9600/7200/4800/2400 bps
(QAM with TCM)
V.29 : 9600, 7200 bps (QAM)
V.27ter : 4800, 2400 bps (PhM)
(DATA)
V.34 : 33600/31200/28800/24000/21600/19200/16800/14400/
12000/9600/7200/4800/2400 bps
(QAM with TCM)
V.32bis : 9600, 4800 bps
V.32 : 4800 bps
V.22bis : 2400 bps
V.22 : 1200 bps
7. Coding Scheme
(FAX)
MH (Modified Huffman)
MR (Modified Read)
(DATA)
None
8. Communication Resolution
<Transmission>
Standard : 8 pels/mm × 3.85 lines/mm
Fine : 8 pels/mm × 7.70 lines/mm
S-Fine : 8 pels/mm × 15.4 lines/mm
<Reception>
Standard : 8 pels/mm × 3.85 lines/mm
Fine : 8 pels/mm × 7.70 lines/mm
9. Halftone
64 Levels, Error Diffusion
10. Error Correction Mode
(FAX)
ITU-T/CCITT Rec. T.30 ECM
(DATA)
ITU-T V.42
11. Image Memory Capacity
60 pages
(using ITU-T Image No.1 in Standard Resolution)
UF-E1
3
UF-E1
12. Transmission Speed
Approx. 3.9 Seconds using ITU-T Image No.1 in Standard Resolution, memory to memory communication.
13. Automatic Dialing
Dialing Signal : 10 PPS/20PPS/DTMF
Dialing Method
Directory Dialing : 120 stations
Abbreviated Dialing : Up to 10 stations and 10 addresses for E-Mail
Manual Number Dialing :
(Direct Dialing) : (Up to 36 digits including pauses and spaces)
Combination Dialing : Combination of Abbreviated and Manual Number Dialing
Multi-Station Dialing : Multi-Station Transmission
Registration Memory Capacity in Abbreviated Dialing and Directory Dialing
Number of Stations : Up to 130 stations
Telephone number of
each station : Up to 36 digits (Including pauses and spaces)
Station name : Up to 15 characters
Redialing
Automatic : Up to 15 times with 0 to 15 minute intervals
Manual : By pressing the Redial button (last number dialed)
14. Print Reduction Ratio
Fixed Reduction Mode : 93 or 100%
15. Memory Backup Battery
This unit uses a capacitor battery to save the clock and calender.
The service life is approximately 8 minutes during power failure.
Up to 50 stations
Deferred Multi-Station Transmission
Up to 50 stations
1.6. Scanner Specifications
1. Document Dimensions
Width : Minimum 148 mm
Maximum 216 mm (Other countries)
Maximum 257 mm (Only for China and Taiwan)
Length : Minimum 105 mm
Maximum 364 mm
2. Automatic Document Feeder
The Automatic Document Feeder feeds the originals from the document tray automatically, starting
with the bottom page.
Paper thickness : Single-page : 0.06 to 0.15 mm
: Multi-page : 0.06 to 0.12 mm
Capacity : 20 documents (A4 size), 15 documents (B4 size)
3. Scanning Method
Horizontal : Contact image sensor
Vertical : Stepper Motor feeding
4. Effective Scanning Width
203 mm (Other countries)
250 mm (Only for China and Taiwan)
5. Scanning Resolution
Standard : 8 pels/mm × 3.85 lines/mm
Fine : 8 pels/mm × 7.7 lines/mm
S-Fine : 8 pels/mm × 15.4 lines/mm
6. Contrast Selection
3 steps (Normal / Lighter / Darker)
4
1.7. Printer Specifications
1. Recording Paper Size (W × L)
Letter : 216 × 279 mm
A4 : 210 × 297 mm
2. Recommended Recording Paper Weight
60 to 90 g / m
3. Paper Capacity
70 sheets (Max. of 100 sheets based on Paper Specification)
4. Printing Resolution
Mono: 600dpi × 600dpi (Printer I/F)
Colour: 600dpi × 300dpi
5. Non Printable Margin
The shaded areas represent the unprintable area on the recording paper.
2
600dpi × 300dpi (ECO Mode OFF)
300dpi × 300dpi (ECO Mode ON)
300dpi × 300dpi
UF-E1
Letter 9.5mm
: 3.5mm
: 3.5mm
11 ∼ 12 in (279 ∼ 297mm)
Letter
A4
A5
B5
8.3 ∼ 8.5 in
(210 ∼ 216 mm)
3.5mmA4
3.0mm
15mm
6. Printing Speed
Mono: 3.5 ppm (Approx.17 seconds/page 300×300 ECO Mode:ON),
Colour: 1 ppm (60 seconds/page)
1.8. Print Cartridge Specification
1. Type : Thermal Inkjet
2. Cartridge :940 pages (Black cartridge, ECO Mode:ON), 470 pages (Black cartridge, ECO Mode:OFF)
340 pages (Colour cartridge, ECO Mode:ON), 170 pages (Color cartridge, ECO Mode:OFF)
3. Number of Nozzles : 48 (Black & Colour cartridge)
1.9. Power
1. Power Requirement
99 ~ 132 VAC, 47~63Hz, Single Phase: 100V version
180 ~ 264 VAC, 47~63Hz, Single Phase: 200V version
2. Power Consumption
Standby : Approx. 1.2W(100V), 1.4W(200V)
Transmission : Approx. 13W
Reception : Approx. 8W
Copy : Approx. 13W
Max : Approx. 30W
[Room temperature : 25 °C]
5
UF-E1
1.10. Paper Specification
Paper Type Size Weight Paper Tray
Capacity
2
Plain Bond Paper A4, Letter
Recycle Paper A4, Letter
64 to 90 g/m
64 to 75 g/m
70 Temperature: 5 to 35 °C
2
100 Temperature: 20 to 30 °C
1.11. Environment
1. Operating Environment
Temperature : 5 to 35 °C
Relative Humidity : 15 to 70% RH
Tilt : The unit must be kept on an even, level surface.
2. Storage Environment (Carton Box Condition)
Temperature : 0 to 60 °C : with the Print Cartridge in the Carton.
-30to60°C : with the Print Cartridge out of the Carton.
Relative Humidity : 15 to 85% RH
Note: The machine should be stored upright.
3. Transportation Environment (Max. 240 hours, Carton Box Condition)
Temperature : 0 to 60 °C : with the Print Cartridge in the Carton.
-30to60°C : with the Print Cartridge out of the Carton.
Relative Humidity : 15 to 85% RH
Note
Humidity:15to70%RH
Humidity:50to60%RH
1.12. Construction
Dimensions (W × D × H) 386 × 290 × 211 mm
Weight (excluding paper) Approximately 4.3Kg
6
External View
UF-E1
7
UF-E1
Control Panel
8
1.13. Function Table
Items UF-E1 UF-S10 UF-332 / UF-A8310
MAIN SPECIFICATION
Compatibility G3 ←←
Modem Speed (kbps) 33.6/31.2/28.8/26.4/24.0/
21.6/19.2/16.8/14.4/12.0/
9.6/7.2/4.8/2.4
Coding Scheme MH/MR MH MH/MR/MMR
ECM
(Conforms to ITU-T/
CCITT)
MWS No Yes No
Short Protocol Yes(B) ←←
Transmission Speed
(ITU-T Image No.1)
Communication
Resolution (lpi)
(Conforms to ITU-T/
CCITT)
SCANNER MECHANISM
ADF Capacity 20 Sheets (A4)
Max.Document Size 216 × 297 mm
Min.Document Size 148 × 105 mm (A6) 148 × 105 mm 148 × 128 mm
Effective Scanning Width 205 mm
Scanning Device CIS CIS CCD(A4)
Scanning Resolution (lpi) 203 × 98
Scanning Speed
(A4 size document)
Reduction XMT No ←←
Collation Stack Yes ←←
Document Stack Face down ←←
PRINTER MECHANISM
Recording Method Thermal Ink-jet Thermal Print Head Thermal Ink-jet
Recording Paper Size A4/Letter ← A4/Letter or Legal
Recording Paper
Capacity
Optional Recording
Paper Cassette
Effective Printing Width 203 mm 205 mm 203mm
Yes No Yes
Approx. 3.9 Seconds Approx. 15 Seconds Approx. 6 Seconds
Tx: 203 × 98
203 × 196
203 × 391
Rx: 203 × 98
203 × 196
203 × 391
15 Sheets (B4)
(Other countries)
257 × 364 mm
(China & Taiwan only)
(Other Countries)
250 mm
(China & Taiwan only)
(8 pels × 3.85 lines/mm)
203 × 196
(8 pels × 7.7 lines/mm)
203 × 391
(8 pels × 15.4 lines/mm)
9.2 seconds (standard) 12 seconds ←
100 sheets 30m 100 sheets
No - No
9.6/7.2/4.8/2.4 14.4/12.0/9.6/7.2/4.8/2.4
-Tx:203× 98
203 × 196
203 × 391
Rx: 203 × 98, 203 × 196
10 Sheets 20 Sheets
216 × 1000 mm 257 × 2000 mm
← 208 mm
←←
UF-E1
9
UF-E1
Items UF-E1 UF-S10 UF-332 / UF-A8310
Recording Resolution (Mono)
600 × 600 dpi
600 × 300 dpi
300 × 300 dpi
(Colour)
600 × 300 dpi
300 × 300 dpi
Recording Speed (Mono) 3.5 ppm
(Colour) 1 ppm
Heater Timer
(Inc. Fan Timer)
Collation Stack No ←←
Recording Paper Width A4/Letter ← A4/Letter or Legal
Recording Paper Length - 30 m
Automatic Paper Cutter - Yes Paper Stack Face up ←←
MEMORY
Memory Capacity 60 pages or 15 min.
Optional Memory No ←←
Memory Backup Yes (Permanent) ←←
Optional Memory Backup - ←←
COPY QUALITY
ABC Yes ←←
Contrast Selection Yes (3 levels) [New Type] ←←
Halftone 64 levels, Error Diffusion,
Super Fine (lpi) - - S-Fine (203 × 391)
Smoothing Yes No Yes
Super Fine
(8 × 15.4 line / mm)
Original Contrast Selection
DIALING FEATURES
One-Touch Keys No 10 16 (UK:15)
One-Touch/Program
Keys
Auto dialing locations 130 50 50
Directory Dialling 120 No ←
Abbr. Auto Dialing (PSTN) 10
Max. digits on AD 36 ←←
Max. ID characters on AD 15 ←←
Alternative Abbr. Dialing No ←←
Full Number Dialing 1 Station ← 12 stations
Automatic Redialing Yes ← Yes
Combination Dialing Yes - Yes
Directory Search Dialing Yes Initial letter selection and
Line Monitor Speaker Yes ←←
No ←←
(1MB: FLASH MEMORY)
Quality Mode
Yes No -
3 levels ←←
No ←←
(Internet) 10
- 300 × 300 dpi
- 2 ppm (30 sec / page)
-
(Max. Diameter 63 mm)
25 pages or 12 min. 30 pages
(512KB: Flash memory)
64 levels (Error Diffusion) 64 levels, Error Diffusion,
Quality Mode
(Tx only)
40 34
Yes
sequential Alphanumeric
Sorted Dialing Search
(ABBR. Numbers
Search)
10
Items UF-E1 UF-S10 UF-332 / UF-A8310
Pulse/Tone change Yes * key Yes
Flash Key Yes ←←
Direct Dialing 1 station
(SPEAKERPHONE)
Manual Redialing Yes ←←
Chain Dialing Monitor Dialing
Off-Hook Dialing
Caller ID Display Yes
(certain countries only)
Telephone Call Time Display
Hold Key Yes ←←
Pulse / Tone Dialing Yes ←←
Telephone Handset Yes ←←
RECEIVE CONTROL
Fax/Tel Auto Switch Yes Yes Yes
TAM Interface No ← Yes
Parallel TAM hookup No ← Ye s
Voice Answer for Fax /
Tel Autoswitch
Silent Reception Fax/Tel Mode
Ring Counter Yes ←←
External TEL Connection No Yes ←
External TAM Interface No ←←
Remote Reception Yes ←←
User-Friendly Reception Yes ← -
Reception Mode Switching Timer
Distinctive Ring Detection Yes
TRANSMISSION FEATURES
Memory Transmission Yes ←←
Multi-Station Transmission
Multifile Transmission No ← Yes (10 files)
Deferred Transmission Yes (1 timer) ← Yes ( 2 t im ers )
Deferred Multi-Station
Transmission
Priority Transmission No ← Yes (ADF TX Reserve)
Batch Transmission No ← No
Cover Sheet No ← No
RECEPTION FEATURES
Substitute Memory
Reception
Auto Reduction to A4 /
Letter
Auto Reduction to Legal No - Yes (70-100%) Automatic
Yes ← -
Yes ←←
Fax/Tam Mode
Fax Mode
No Yes -
(certain countries only)
Max. 50 stations Max. 53 stations Yes
Yes ( 1 ti mer ) ← Yes
No Yes ←
No - Yes (70-100%)
←
(Monitor)
←←
← -
← -
←←
←
(certain countries only)
(certain countries only)
(certain countries only)
(62 / 61 (UK) stations)
(2 tmr 62 / 61 (UK) stns)
Reduction
UF-E1
11
UF-E1
Items UF-E1 UF-S10 UF-332 / UF-A8310
Fixed Reduction to A4 Yes (93% Fixed) - No
Overlapping Print No - No
Receive to Memory Yes - Yes
Eco Ink Reception Yes - No
Personal Mailbox - Yes -
COPY FUNCTIONS
Single Monochrome
Copy
Single Color Copy No - No
Multiple Monochrome
Copy
Multiple Color Copy No - No
Copy Monochrome
Reduction
Copy Color Reduction No - No
Copy Monochrome
Enlargement
Copy Color Enlargement No - No
Copy Monochrome
Resolution
Copy Color Resolution No - No
CERTAINTY
Verification Stamp No ←←
Header / Total Page Print Yes ←←
Comm.Journal No - Yes
Communication Report Yes ← No
Transaction Journal Yes ← Yes (32 with View Mode)
Last Individual XMT Journal
Power Failure Report Yes ← No
View Mode No ← Yes
Mailbox Reception Notice
(Memory Reception
Notice)
LIST PRINTOUTS
One-Touch List - - Yes
Abbr. No. List - - Yes
Speed Dial List Yes ← No
Program List No ← No
Directory Search List No ← No
Fax Parameter List Yes ←←
i-Fax Parameter List Yes No ←
File List No ← Yes (with View Mode)
Character Code List No ← No
Directory Sheet No ← Yes
Callback Message No ← No
Caller ID List, Black List Yes ← No
Help Print Yes ← -
IDENTIFICATIONS
Logo/TTI Max. 25 characters ←←
Character ID First 16 characters of the
Numeric ID Max. 20 digits ←←
Yes ←←
Yes (99 copies) Max. 99 copies Yes (99 copies)
Yes - Yes
Yes (141% Fixed) No Yes
203×196 lpi - 203×196 lpi
No ← Ye s
-Yes-
←←
Logo
12
Items UF-E1 UF-S10 UF-332 / UF-A8310
SPECIAL COMMUNICATION FEATURE
Password XMT/RCV
(Closed Network)
Selective Reception
(TSI check)
Relay XMT Request No ←←
Relay XMT Center No ←←
Confidential XMT No ← Ye s
Confidential Comm. Center
Mailbox XMT/Polling No ← Yes
Mailbox Center No ← Yes (7 boxes)
OMR-XMT No ←←
Sub-Address XMT No ← Yes (T. Routing)
Sub-Address RCV No ←←
Auto-Forwarding No ←←
INTERNET FEATURE
E-Mail Reception Yes No ←
Fax Transmission /
Reception
OTHERS
Panafax Color Printing
System
Panafax Multi-Function
System
Fax Access Code No ←←
Pin Code Access
(PBX Access Code)
Department Code No ←←
Logo Input Method Character Keys ←←
Remote Diagnostic Function
Internal Demo No Yes No
2-W Leased Line No ←←
AI Redial No ←←
Auto Multi-copy No ←←
Auto-Forwarding No ←←
Check & Call Function No ←←
Clock Backup Yes (8 min.) Yes (Max. 12H) Yes
Memory Backup Yes (Flash) ←←
Private Call - No Printer Interface Yes No ←
OPTIONS
Encryption Interface No ←←
V24 Interface No ←←
PC Interface No ←←
CONSTRUCTION
Telephone Handset Yes ← Yes
Dimensions (W × D × H) 386 × 290 × 211mm Approx.
Weight 4.3 kg Approx. 4.5 kg 8.5 kg
POLLING FEATURES
No ←←
No Yes ←
No ←←
Yes No ←
No No ←
No ←←
No ←←
Yes ←←
(certain countries only)
380 × 378 × 196mm
330 × 252 × 157 mm
UF-E1
13
UF-E1
Items UF-E1 UF-S10 UF-332 / UF-A8310
Polling Reception Germany only Yes ←
Fax Bulletin Board No Yes No
CONVENIENCE
Panel Display 16 x 1 16 characters x 1 line 20 x 2 Alphaneumeric
LCD
Help Function Yes ← -
Voice Contact - Yes -
TAM FEAT UR ES
Built-in TAM Max. 15 min. Max. 12 min. ICM Recording Counter Max. 99 calls ← -
OGM Max. 30 Sec ← -
Message Transfer Yes ← -
Tol l S av er No Yes Time Stamp Yes ← -
Memory / 2-way Recording
REMOTE CONTROLLED FEATURES
IN / OUT Switching Yes ← -
ICM Playback / Skip /
Erase
Personal Mailbox
Retrieve
Personal Mailbox Setting No Yes Fax Bulletin Retrieval /
Erasing / Storage
Message Transfer Setting
Mailbox (Memory)
Reception Notice Setting
Destination Tel. No.
Change for Message
Transfer
Destination Tel. No.
Change for Mailbox
(Memory) Reception
Notice
OGM Erase / Recording No Yes -
LANGUAGE
Control Panel Depending on country ←←
LCD Screen Depending on country ←←
Journal / List / Printouts Depending on country ←←
User's Guide Depending on country ←←
Quick Reference Guide Depending on country ←←
Carton Box English / German /
ATTACHMENT AND ACCESSORIES
Recording Paper Yes (10 pages) 1 (10 m) Yes
Telephone Handset 1 ←←
Telephone Line Cord 1 ←←
User's Guide 1 ←←
Quick Reference Guide 1 ←←
Curl Cord 1 ←←
Power Supply Cord 1 ←←
Yes ← -
Yes ← -
No Yes -
No Yes -
No Yes -
No Yes -
No Yes -
No Yes -
←←
French / Spanish
14
Items UF-E1 UF-S10 UF-332 / UF-A8310
Recording Paper Stacker - 1 Directory Sheet - 1 Dust Cover Yes - Cartridge Holder Yes - PrinterDriverCD Yes - Quick Start Guide Yes(Printer Driver) - Internet Set-up Guide Certain countries only - -
CONSUMABLES
Recording Paper
(A4 size)
Recording Paper
(Letter size)
POWER SUPPLY
ENVIRONMENT
Operating Environment
Temperature 5 to 35 °C ←←
Relative Humidity 20 ot 80 % RH ←←
Storage Environment
Temperature -10 to 55 °C ←←
Relative Humidity 10 ot 85 % RH ←←
Transportation Environment (Max. 72H)
Temperature -30 to 60 °C ←←
Relative Humidity 10 ot 85 % RH ←←
STANDARD
ITU-T Rec, T3, T4, T30 ←←
Safety IEC 950 ←←
EIM EN 55022 Class B ←←
Telecommunication PTT requirement ←←
- THM-331E -
- THM-431F -
AC 99 - 132V,
47 - 63 Hz
AC 180 - 264V,
47 - 63 Hz
AC 110 - 127V, 60 Hz,
Single Phase
AC 200 - 240V, 50 / 60
Hz, Single Phase
←
←
UF-E1
15
UF-E1
Notes
16
2 Disassembly Instruction
2.1. General Disassembly Flowchart
UF-E1
Remove the Power Cord, Line Cable,
Handset and Recording Paper Tray.
Remove the bottom plate.
(6015)
Remove the NCU PCB Assy.
(6013)
Remove the Power Supply
Unit.
Remove the Printer I/F PCB
Assy. (6011)
Remove the SC PCB Assy.
(6012)
Remove the Control Panel
Assy.
Remove the TX Frame.
Remove the Feed Roller Assy.
Remove the Top Cover.
Remove the CIS Assy.
Remove the Scanner Block.
Open the Control Panel Cover.
Replace the ADF separator
Rubber.
Remove the Panel PCB Assy.
LED PCB Assy and LCD
Module.
Remove ASF Unit.
Remove ASF Roller.
Clean the ADF, Feed Roller.
Adjust the ADF pressure.
Remove the Catridge Cap.
(8018)
Remove the Tx Motor,
ADF Roller.
Remove the ASF Unit.
Remove the Printer Unit.
Remove the DENC Motor.
(8001)
Remove the Microphone.
(6017) and Speaker (6002).
Remove the Microswitch.
(7013)
17
UF-E1
2.2. SC PC Board(6012), NCU PC Board(6013), Printer I/F PC Board(4002)
and Power Supply PC Board(6009)
(1) Disconnect the Power Cord (9008).
(2) Disconnect the Line Cord (9016).
(3)
(1)
(2)
(3) Remove the Handset (2001) and the Handset
Cord (9007).
(4) Remove Recording Paper Tray (6016).
(7)
(6)
(8)
(5)
(9)
(4)
(6)
(6)
(5)
(5) Three Screws (19).
(6) Five Screws (F9).
(7) Remove bottom plate (6015).
(8) Two Screw(1Y).
(9) Remove NCU PCB (6013).
(10) Remove four connectors.
(9)
18
UF-E1
(11)
(12)
(14)
(11)
(11) Three Screws (1Y).
(12) Remove Power Supply Assy.
(13) Remove one connector.
(13)
(14) Two Screws (36).
(15) Remove Power Supply PCB (6009).
(15)
(17)
(18)
(16) Remove Printer I/F Cap.
(17) Remove Printer I/F PCB (6011).
(16)
(18) Two Screws.
(19) Remove Installation Plate (6010).
(19)
19
UF-E1
(20)
(21)
(22)
(20) Remove five connectors.
(21) Three Screws (F9).
(22) Remove SC PCB (6012).
(21)
(20)
20
2.3. PNL PC Board (1015), LCD Module (1014)
(1) Open the Control Panel.
(2) Release the Panel Lock (1026).
(1)
(2)
(3) Two Screws (1Y).
(4) Release four latches.
(4)
UF-E1
(7)
(8)
(5)
(3)
(7)
(4)
(5) Remove Control Panel Assy.
(6) Remove one connector.
(6)
(7) Six Screws (7B).
(8) Remove LED PCB Assy.
(8)
21
UF-E1
(10)
(9)
(11)
(12)
(9) Remove Harness of LCD Module
(10) Remove PNL PCB(1015).
(10)
(11) Remove the Key Unit 4(1004).
(12) Remove the Difusion Sheet(1027).
(13) Remove the LCD Module(1014).
(13)
22
2.4. Feed Roller (3003), CIS (3011), ADF Roller(3006), IMD Sensor PC Board(3017), ASF Roller (7006)
(1) Remove the Frame TX(1023).
(1)
(2) Pull up Feed Roller Assy by holding both sides
tab.
(3) Remove White Plate(2007).
(2)
(3)
UF-E1
(4)
(2)
(8)
(4)
(4)
(6)
(5)
(4) Four Screws(C1).
(5) Open Pen Cover.
(6) One Screw(1Y).
(7) Release two latches.
(8) Remove Top Cover Assy.
(7)
23
UF-E1
(11)
(13)
(10)
(9)
(9) Release one latch.
(10) Release two latches.
(11) Remove a connector.
(12) Release four latches.
(13) Remove CIS(3011) from its holder (3013).
(17)
(18)
(12)
(19)
(14)
(20)
(16)
(19)
(15)
(14) Four Screws(1Y).
(15) Remove the Ground Plate (2010).
(16) Remove Scanner Unit..
(17) Remove connectors.
(18) Remove a connector from TX Motor (3007).
(19) Two Screws(19).
(20) Remove TX Motor (3007).
24
(21)
(22)
UF-E1
(21) Remove TX Motor Blaket(3008).
(22) Remove Three Gears.
(26)
(23)
(24)
(23) Remove Shaft Gear(3004).
(24) Remove Joint ADF(3005).
(25) Remove ADF Roller(3006).
(25)
(26) Remove the IMD Sensor(3017).
(28)
(28)
(27)
(29)
(27)
(27) Remove two screws (C7).
(28) Remove Micro Switch (7014) and connectors.
(29) Remove ASF Unit.
25
UF-E1
(30) Remove Cover ASF (7009).
(30)
(31) Remove D Gear C35 (7005).
(32)
(31)
(32) Remove ASF Roller (7006).
26
Loading...