This service information is designed for experienced repair technicians only and is not intended for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service
or repair the product or products dealt within this service information by anyone else could result in serious injury or death.
1. Panasonic Communications Company of North America, and other Panasonic Sales
Companies reserve the right to change any information enclosed herein without prior
notification. (This includes, but is not limited to, parts pricing, availability, and text)
2. Electrical parts supplied may include previously used components.
3. Important Safety Notice
Components identified by a mark, have special characteristics important for safety.
When replacing any of these components, use only manufacturer’s specified parts.
4. In New Parts column, “N” indicates part is used only in UF-6300/6200 Series, “C”
indicates part is used in previous models.
5. In Remarks column, “PM” indicates “Preventive Maintenance Part”.
6. In Remarks column, “RTL” indicates that the Retention Time is limited for this item. After
the discontinuation of this assembly in production, the item will continue to be available for
a specific period of time. The retention period of availability is dependent on the type of
assembly, and in accordance with the laws governing part and product retention.
After the end of this period, the assembly will no longer be available.
7. This "Unit" which includes other itemized parts is provided as "Limited Availability" for your
convenience, and will only be offered for up to 3 years after the production of the unit
ceases. However, the individual contents of the assembly will be available for the
standard period.
8. This Product Uses Lead (Pb) Free Solder Printed Circuit Boards (PCBs).
Information regarding Lead-Free (PbF) solder;
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a mark following the PCB
part numbers in a label on the PCB.
Caution:
• Pb free solder has a higher melting point than standard solder; typically the melting
point is 50 - 70 °F (30 - 40 °C) higher. Please use a soldering iron with temperature
control and adjust it to 700 ± 20 °F (370 ± 10 °C). Exercise care while using higher
temperature soldering irons, do not heat the PCB for too long to prevent solder
splash or damage to the PCB.
• Pb free solder will tend to splash when heated too high (about 1112 °F/600 °C).
• ECO SOLDER M705 (available from Senju Metal Industry Co., Ltd.;
URL: http://www.senju-m.co.jp
) is recommended when repairing PbF PCBs.
2
General Annotations
9. Important Notice
(Especially for countries belonging to the European Union):
This product is fully compliant with the national laws transposed from the EU Directive on
the restriction of the use of certain hazardous substances (RoHS) in electrical and
electronic equipment, effective July 1, 2006 in the EU countries.
In order for the product to comply with the RoHS Directive, the six particular substances
(lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and
polybrominated diphenyl ethers) have been either totally eliminated or limited to the
concentration level below maximum allowed. Consequently spare parts have been
changed to RoHS-compliant parts where applicable.
Due to spare parts application of RoHS legislation, non-compliant spare parts cannot be
used to repair compliant products put on the EU market on or after July 1, 2006.
Therefore, please make sure to order and use only RoHS-compliant spare parts listed in
this manual.
The contents of this Manual, and the Specifications are subject to change without
notice.
Panasonic Communications Co., Ltd. reserves the right to make improvements in the
product design without reservation, and without notice.
Published in Japan.
1.11. PC Board / Harness................................26
1.12. Packing and Accessories........................29
5
1Exploded View & Parts List
1.1.Destination Codes
Note:
1. Panasonic Communications Company of North America and other Panasonic Sales Companies reserve the right to change any information enclosed herein without prior notification.
(This includes, but is not limited to, parts pricing and availability, and text)
2. Electrical parts supplied may include previously used components.
3. Important safety notice
Components identified by mark have special characteristics important for safety.
When replacing any of these components, use only manufacturer's specified parts.
4. In New Parts column, "N" indicates part is used only in UF-6300 / 6200 / 5300 model, "C" indicates part is used in previous models.
5. Blue Texts and Illustrations indicate the new parts, and the parts are changed from previous models.