TX-L42DT60E TX-L47DT60E TX-L50DT60E TX-L55DT60E TX-L60DT60E
TX-L42DTW60 TX-L47DTW60 TX-L50DTW60 TX-L55DTW60 TX-L60DTW60
eHELP
English
Watching
my Home Screen
• Information |
11 |
• How to use |
12 |
• Settings |
13 |
Basic
• Satellite connection |
15 |
• Basic connection |
16 |
• Selecting channel |
18 |
• Information banner |
20 |
• Option Menu |
22 |
• Subtitle |
23 |
• Off Timer |
24 |
• Last view |
24 |
External equipment
• External connection |
25 |
• Watching external input |
28 |
• Operating with TV’s remote control |
29 |
• HDMI features |
30 |
• Terminal information |
32 |
• Valid input signals |
33 |
For best picture
• Viewing Mode |
34 |
• Ambient Sensor |
35 |
• Auto power standby function |
35 |
• Aspect |
35 |
• Aspect Control Signal |
37 |
• Advanced Settings |
39 |
• Lock Settings |
42 |
• Copy Adjustment |
43 |
For best audio
• Sound mode |
43 |
- 2 -
TV Guide
• Using TV Guide |
44 |
• Timer Programming |
46 |
Teletext
• Viewing Teletext |
47 |
• Teletext mode |
49 |
3D
• Note |
50 |
|
• 3D |
Eyewear - Maintenance |
51 |
• Viewing 3D |
51 |
|
• 3D |
Mode Selection |
52 |
• 3D |
Settings |
53 |
• Source image format |
55 |
Tuning and editing channels
• Setting menu |
56 |
• Favourites Edit |
56 |
• Channel List |
58 |
• Auto Setup |
59 |
• Manual Tuning |
62 |
• Update Channel List |
63 |
• New Channel Message |
64 |
• Signal Condition |
64 |
• Selectable satellites |
65 |
Recording
USB HDD setup
• Preparations |
66 |
• Setting for USB HDD |
67 |
Recording current programme
• One Touch Recording |
69 |
• REW LIVE TV |
70 |
Timer Programming
• Setting timer programming |
71 |
- 3 -
• Editing timer programming |
73 |
• Note |
74 |
Technical information
• USB HDD |
75 |
Internet service
Internet content
• Information |
77 |
• Selecting internet content |
77 |
• Note |
78 |
Network connections
• Internet connection |
79 |
• Note |
80 |
Network settings
• Network Connection |
80 |
• Custom - Wireless |
82 |
• Custom - Wired |
84 |
• Network Status |
85 |
• VIERA remote Settings |
86 |
• Network Link Settings |
86 |
• Software Update |
86 |
• New Software Message |
86 |
Home network
DLNA
• Information |
87 |
• Using DLNA |
90 |
Network connections
• DLNA connection |
91 |
• Note |
93 |
Network settings
• Network Connection |
93 |
• Custom - Wireless |
94 |
|
- 4 - |
• Custom - Wired |
97 |
• Custom - Wireless Access Point |
98 |
• Network Status |
99 |
• VIERA remote Settings |
99 |
• Network Link Settings |
100 |
• Software Update |
101 |
• New Software Message |
101 |
Photos
• Selecting file |
102 |
• Viewing photo |
103 |
• Using slideshow |
103 |
Videos
• Selecting file |
105 |
• Watching video |
106 |
• Video Setup |
107 |
• Audio output settings |
108 |
Music
• Selecting file |
109 |
• Playing music |
110 |
• Music Setup |
110 |
DIGA Recorder
• Controlling DIGA Recorder |
111 |
Technical information
• Photo format |
111 |
• Video format |
112 |
• Music format |
115 |
Media Player
Using Media Player
• Information |
116 |
• Selecting device / mode |
118 |
Photo mode
• Selecting file |
120 |
|
- 5 - |
• Viewing photo |
120 |
• Sorting photos |
121 |
• Multi Shot 3D |
121 |
• Using slideshow |
122 |
Video mode
• Selecting file |
126 |
• Watching video |
127 |
• Video Setup |
128 |
• Audio output settings |
129 |
Recorded TV mode
• Selecting content |
130 |
• Watching recorded TV |
131 |
• Grouping contents |
132 |
• Deleting content |
132 |
• Changing device |
133 |
• Chapter List |
133 |
• Audio output settings |
133 |
Music mode
• Selecting file |
134 |
• Playing music |
134 |
• Music Setup |
135 |
Technical information
• Device handling caution |
136 |
• SD Card |
136 |
• USB devices |
137 |
• Photo format |
138 |
• Video format |
138 |
• Music format |
141 |
Functions
APPS List
• Information |
142 |
• How to use |
142 |
- 6 -
• Settings |
143 |
Multi Window
• Information |
144 |
• How to use |
144 |
• Note |
146 |
VIERA Link “HDAVI Control™”
• Summary of VIERA Link |
147 |
• Preparations |
151 |
• Easy playback |
151 |
• Power on Link |
152 |
• Power off Link |
152 |
• Standby Power Save |
152 |
• Intelligent Auto Standby |
152 |
• VIERA Link Control |
153 |
• Speaker Selection |
154 |
• Note |
155 |
Child Lock
• Using Child Lock |
156 |
• PIN number |
157 |
• Parental Rating |
157 |
Data Service Application
• Using Data Service Application |
157 |
• Cookie |
158 |
• Note |
158 |
Common Interface
• Caution |
159 |
• Using Common Interface |
159 |
Shipping Condition
• Shipping Condition |
160 |
Updating the TV Software
• Information |
161 |
• Auto update |
161 |
- 7 -
• Manual update |
162 |
Setting characters
• Using numeric buttons |
162 |
Voice Control
• Preparations |
163 |
• How to use |
164 |
Bluetooth devices
• Bluetooth Setup |
165 |
Keyboard / Gamepad
• Keyboard |
166 |
• Gamepad |
167 |
Settings
Setting menu
• How to use |
168 |
Picture
• Viewing Mode |
169 |
• Basic settings |
170 |
• Ambient Sensor |
171 |
• Noise reduction settings |
171 |
• Resolution Remaster |
171 |
• Caption Smoother |
171 |
• Brilliance Enhancer |
171 |
• Intelligent Frame Creation |
171 |
• 24p Smooth Film |
172 |
• Advanced Settings |
172 |
• Option Settings |
172 |
• Screen Settings |
174 |
• 3D Settings |
175 |
• Lock Settings |
176 |
• Copy Adjustment |
176 |
• Reset to Defaults |
176 |
- 8 -
Sound
• Mode |
177 |
• Basic settings |
177 |
• Volume settings |
178 |
• Voice Guidance Settings |
179 |
• Advanced settings |
180 |
• Reset to Defaults |
182 |
Network
• Network Connection |
182 |
• Network Status |
182 |
• VIERA remote Settings |
182 |
• Network Link Settings |
182 |
• Other settings |
182 |
Timer
• Off Timer |
183 |
• Timer Programming |
183 |
• Time Zone |
183 |
• Auto Standby |
183 |
• No signal Power off |
184 |
Setup
• Eco Navigation |
184 |
• Voice Control Settings |
184 |
• USB Device Setup |
184 |
• Recording Setup |
184 |
• VIERA Touch Pad Controller |
184 |
• Bluetooth Setup |
185 |
• Child Lock |
185 |
• Tuning Menu |
185 |
• Language |
187 |
• Display Settings |
187 |
• Common Interface |
189 |
• VIERA Link Settings |
189 |
• Professional Mode (isfccc) |
190 |
• Data Service Application |
191 |
|
- 9 - |
• System Menu |
191 |
• Other Settings |
192 |
Support
FAQs
• Picture |
193 |
• Digital TV |
194 |
• Analogue TV |
195 |
• Sound |
196 |
• 3D |
197 |
• HDMI |
197 |
• Network |
198 |
• Other |
199 |
Maintenance
• Care and Cleaning |
201 |
Information
• Using Help menu |
202 |
Optional accessories
• 3D Eyewear |
202 |
• Communication Camera |
203 |
• Wall-hanging bracket |
203 |
Licence
|
• Licence |
204 |
||
|
|
|
|
|
|
|
|
Letters enclosed in a box indicate remote control buttons. |
|
|
OK |
|
||
|
Menu |
Letters in cyan indicate on-screen display items. |
|
|
|
|
|
References in this eHELP |
|
|
●● The images shown in this eHELP are for illustrative purposes only. |
|
- 10 -
“my Home Screen” is a gateway to the TV, applications, and more.
It provides easy access to special features such as the Media Player, videos, games, communication tools, etc. as shown below (example).
HOME
OK
OK HOME
Home Screen
Selected content screen (TV, application, etc.)
Home Screen Selection
– Your preferred Home Screen can be selected or added.
- 11 -
How to use
Home Screen provides access to special features such as the Media Player,
TV, internet content, data services, communication tools, etc.
1.Display Home Screen with HOME (Example)
●● The last viewed Home Screen is displayed when the TV is turned on. ●● Press again to select or add your preferred Home Screen layout.
Watching my Home Screen Settings
2. Select a feature with / / / and press OK to access ●● To watch full-screen TV
1)Select the TV viewer with / / / (Example)
2)Press OK to watch (Example)
●● Also refer to Tutorial from the tool guide.
- 12 -
Select the setup menu from the tool guide on the top of the screen, or use coloured button to display the setup menu.
(Example)
■■Home Screen Selection
1.Display Home Screen Selection with HOME
(Example)
2.Select the screen with / and press OK to set Full Screen TV:
Displays full-screen TV
TV Home Screen:
To make your TV experience more convenient and comfortable. Lifestyle Screen:
Displays the TV with useful information and services for everyday life.
Info Screen:
Enjoy internet content while watching TV.
Add New Screen:
You can add a new screen to personalise.
■■Face Recognition
By using the Communication Camera, you can select the registered Home
Screen with face recognition. Please refer to Tutorial from the tool guide.
●● Communication Camera is not included. Please purchase as necessary.
Support Optional accessories Communication Camera
- 13 -
■■Settings
You can customise any Home Screen. (For example, changing the wallpaper, renaming freely, editing applications, setting the screen launched when the
TV is turned on, etc.)
1.Select Settings from the tool guide
2.Follow the on-screen instructions
■■Search
You can search the content from various features.
1.Select Search from the tool guide
2.Follow the on-screen instructions
= Note =
●● To use this function fully, you need a broadband network environment.
Ensure the network connections and network settings are completed.
Internet service Network connections
Internet service Network settings
●● Be sure to update the software when a software update notice is displayed on the TV screen. If the software is not updated, you will not be able to use my Home Screen. You can update the software later manually.
Internet service Network settings Software Update
- 14 -
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables.
●● For DVB-S
■■Dual tuner (DiSEqC)
Connect the both of satellite IN 1 / IN 2 terminals to the satellite dish with Multi
Switcher, and you can watch or record 2 DVB-S programmes simultaneously, etc.
Satellite IN 1 / IN 2 terminals
Satellite cables with Multi Switcher
Satellite dish
■■Dual tuner (Single Cable System)
Connect the satellite IN 1 terminal to the satellite dish with the Single Cable router, and you can watch or record 2 DVB-S programmes simultaneously, etc.
Satellite IN 1 terminal
Satellite cable with Single Cable router
Satellite dish
- 15 -
■■Single tuner
Connect the satellite IN 1 terminal to the satellite dish.
●● Watching or recording 2 DVB-S programmes simultaneously, etc. are not available.
Satellite IN 1 terminal
Satellite cable
Satellite dish
= Note =
●● To ensure your satellite dish is correctly installed, please consult your local dealer. Also consult the received satellite broadcasting companies for details.
●● Selectable satellites and dish alignment to tune DVB-S channels
Watching Tuning and editing channels Selectable satellites
●● External equipment and cables shown are not supplied with this TV.
●● Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor, otherwise distortion of image / sound may occur or operation of other equipment may be affected.
●● Check the terminal type and cable plugs are correct when connecting.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables.
■■Aerial
Terrestrial / cable terminal
RF cable
- 16 -
Terrestrial aerial or cable
●● For DVB-C, DVB-T, Analogue
■■DVD Recorder / VCR
Terrestrial / cable terminal
RF cable
DVD Recorder / VCR
Terrestrial aerial or cable
AV1 (SCART) terminal
SCART cable
–AV1 (SCART) adaptor (supplied) is necessary when connecting to the TV.
■■DVD Recorder / VCR and Set top box
HDMI terminal
- 17 -
HDMI cable
Set top box
Cable
AV1 (SCART) terminal
SCART cable
–AV1 (SCART) adaptor (supplied) is necessary when connecting to the TV.
Terrestrial / cable terminal
RF cable
DVD Recorder / VCR
Terrestrial aerial
●● For VIERA Link connections
Functions VIERA Link “HDAVI Control™” Summary of VIERA Link
= Note =
●●
●●
●●
●●
●●
External equipment and cables shown are not supplied with this TV.
Please also read the manual of the equipment being connected.
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor, otherwise distortion of image / sound may occur or operation of other equipment may be affected.
When using a SCART or HDMI cable, it is recommended to use fully wired one.
Check the terminal type and cable plugs are correct when connecting.
1.Display the TV Selection screen with TV
2.Select the mode with / and press OK to set DVB-S / DVB-C / DVB-T / Analogue
●●
●●
●●
The selectable modes vary depending on the channels stored.
You can also select the mode pressing TV repeatedly on the remote control or INPUT/OK/HOLD for MENU button on the control panel of the TV.
If the TV Selection menu is not displayed, press TV to switch the mode.
- 18 -
3. Select a channel with Channel Up / Down or numeric buttons
●● Press the numeric buttons to select a channel position with 2 or moredigit (e.g. 399, press ).
■■To select a channel from the channel list
1.Display the channel list with OK
2.Select a channel from the list with / and press OK to watch ●● To sort channel names in alphabetical order
(red)
●● To change the category
(blue)
■■To select a channel using information banner
1.Display information banner with if it is not displayed
2.Select a channel with / and press OK to watch while the banner is displayed
Watching Basic Information banner
■■To select a channel using TV Guide
1.Display TV Guide with GUIDE
2.Select the current programme or channel with / / / and press OK to access
3.Select View with / and press OK to access (DVB)
– The current programme is displayed on the top left of the screen.
4.Press OK to exit TV Guide
Watching TV Guide Using TV Guide
■■To watch pay-TV
●● For information of the encrypted channels
Functions Common Interface Using Common Interface
●● Consult the operator / broadcaster or CI module manufacturer for more information and conditions of the services.
- 19 -
Display information banner with .
●● Also appears when changing a channel.
(Example)
Channel position and name
Channel type (Radio, HDTV, etc.) / encrypted channel () / TV mode (,
, , )
Programme
Programme start / finish time (except Analogue) Channel position, etc. (Analogue)
Progress time indicator of the selected programme (except Analogue) Category
●● To change the category (DVB)
1)Display the category list with (blue)
2)Select the category with / and press OK to change
Current time
Features available / message meanings
:
Sound mute is on Bad signal:
Poor quality TV signal
Dolby D+, Dolby D, HE-AAC:
Dolby Digital Plus, Dolby Digital or HE-AAC audio track :
Subtitle service available :
Teletext service available
- 20 -
:
Multiple audio available
:
Multiple video available :
Multiple audio and video available
Stereo, Mono:
Audio mode
:
Data service (Hybrid Broadcast Broadband TV application) available
Functions Data Service Application Using Data Service Application
1 – 90:
Off Timer remaining time
Watching Basic Off Timer
●● To confirm another tuned channel
/
●● To watch the channel listed in the banner
OK
●● Information on the next programme (DVB)
●● To hide the banner EXIT
●● Extra information (DVB)
– Press again to hide the banner.
●● To adjust banner timeout, set Banner Display Timeout.
Settings Setup Display Settings
- 21 -
Confirm or change the current status.
1.Display Option Menu with OPTION
2.Select one of the following items with / and press OK to access
Voice Guidance Settings / Multi Video / Multi Audio / Dual Audio / Sub
Channel / Subtitle Language / Teletext Character Set / Teletext Language /
MPX / Volume Correction / CAM Selection
●● The function items vary depending on the country you select. 3. Set with / / / and press OK to store
Voice Guidance Settings
Guidance settings for visually impaired users
Settings Sound Voice Guidance Settings
Multi Video
Selects from a group of multiple videos (if available).
●● This setting is not memorised and it will return to the default setting once you exit the current programme.
●● For DVB mode
Multi Audio
Selects between alternative languages for sound tracks (if available).
●● This setting is not memorised and it will return to the default setting once you exit the current programme.
●● For DVB mode
Dual Audio
Selects stereo / monaural (if available).
●● For DVB mode
Sub Channel
Selects the multifeed programme - sub channel (if available).
●● For DVB mode
- 22 -
Subtitle Language
Selects the language for subtitles (if available). ●● For DVB mode
●● Not valid on the sub screen in multi window mode
Teletext Character Set
Sets the teletext language font.
Settings Setup Display Settings
Teletext Language
Selects between alternative languages for teletext (if available). ●● For DVB mode
MPX
Selects multiplex sound mode (if available).
Settings Sound Advanced settings
●● For Analogue mode
Volume Correction
Adjusts the volume of each individual channel or input mode.
CAM Selection
Selects CI module (if available).
●● Not valid while the recording is in progress ●● For DVB mode
Display / hide subtitles (if available) with STTL.
●● To select the preferred language for DVB subtitles (if available), set Preferred Subtitles.
Settings Setup Language
= Note =
●● Subtitles may not be displayed properly in 3D images.
●● If you press STTL in Analogue mode, the TV switches to teletext service and calls up a favourite page. Press EXIT to return to TV mode.
●● Not valid on the sub screen in multi window mode
- 23 -
Turn the TV Standby mode automatically after a fixed period.
1.Display the menu with MENU
2.Select Timer Off Timer with / and press OK to access
3.Select the time in 15-minute increments with / and press OK to set
90 / 75 / 60 / 45 / 30 / 15 / Off (minutes)
●● To cancel, set to Off or turn the TV off.
●● The remaining time displays on the information banner.
Watching Basic Information banner
●● When the remaining time is less than 3 minutes, the remaining time will flash on the screen.
Switch to a previously viewed channel or input mode easily with LAST VIEW.
●● Press again to return to the current view.
= Note =
●● Watching less than 10 seconds is not reflected in the previously viewed channel or input mode.
- 24 -
These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment.
●● For basic connection
Watching Basic Basic connection
●● To use the specific devices supporting Bluetooth wireless technology
Functions Bluetooth devices
●● Check the terminal type and cable plugs are correct when connecting.
■■HDMI equipment
HDMI terminal
Fully wired HDMI compliant cable
Recorder / Player / 3D compatible player / Set top box / Camcorder / Amplifier with speaker system
= Note =
●● For VIERA Link connections
Functions VIERA Link “HDAVI Control™” Summary of VIERA Link
●● Use HDMI2 for connecting an amplifier. This connection is applicable when using an amplifier that has ARC (Audio Return Channel) function.
- 25 -
■■AV devices
AV2 (COMPONENT) terminals
Component cables
– AV2 (COMPONENT / VIDEO) adaptor (supplied) is necessary. DVD player
AV2 (VIDEO) terminals
Composite cables
– AV2 (COMPONENT / VIDEO) adaptor (supplied) is necessary. Camcorder / Game equipment
■■USB devices
USB port
USB cable
USB HDD / Communication Camera
= Note =
●● It is recommended to connect the devices to the TV’s USB ports directly.
- 26 -
●●
●●
●●
●●
●●
●●
You cannot use two or more of the same kind of USB devices simultaneously except USB Flash Memory or USB HDD.
Use USB 3 port for connecting the USB HDD.
Use USB 1 port for connecting the Communication Camera.
Some USB devices or USB HUB may not be used with this TV.
You cannot connect any devices by using USB card reader.
Additional information for the devices may be on the following website.
(English only) http://panasonic.net/viera/support
■■To listen with speakers
DIGITAL AUDIO
Optical digital audio cable
Amplifier with speaker system
●● To enjoy the sound from the external equipment in multi-channel sound (e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier. For the connections, read the manuals of the equipment and amplifier.
■■Headphones
Headphone jack
M3 stereo mini plug
Headphones
●● To adjust volume, set Headphone Volume.
Settings Sound Volume settings
- 27 -
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input.
1.Display the input selection menu with AV
2.Select the input mode connected to the equipment with / and press OK to watch (The selected mode is displayed on the top left of the screen)
●●
●●
●●
●●
TV receives input signals automatically connecting with SCART when playback starts.
–Input signals are automatically identified by the SCART (pin 8) terminal.
–This function is also available for HDMI connections.
–When input mode is not switched automatically, perform as above or check the setup of the equipment.
You can also select the input pressing AV on the remote control or
INPUT/OK/HOLD for MENU button on the control panel of the TV. Press repeatedly until the desired input is selected.
To switch between COMPONENT and VIDEO in AV2, select with / .
You can label or skip each input mode. Skipped inputs will not be displayed when AV is pressed. (Input Labels)
Settings Setup Display Settings
●● The remote control is capable of operating the contents or external equipment.
Watching External equipment Operating with TV’s remote control
●● To return to TV mode
TV
= Note =
●●
●●
If the external equipment has an aspect adjustment function, set it to 16:9.
For details, read the manual of the equipment or ask your local dealer.
- 28 -
You can operate the contents in Media Player / media server, recording functions or the connected equipment with the below buttons of this TV’s remote control.
:
Playback videocassette / DVD / video content
:
Stop the operations
:
Rewind, view the picture rapidly in reverse (VCR)
Skip to the previous track, title or chapter (DVD / video content) :
Rewind, view the picture rapidly in reverse (VCR) Search backward (DVD / video content)
:
Fast-forward, view the picture rapidly forward (VCR)
Skip to the next track, title or chapter (DVD / video content)
:
Fast-forward, view the picture rapidly forward (VCR) Search forward (DVD / video content)
:
Pause / Resume
Press and hold to play at slow speed (DVD)
:
One Touch Recording
Recording Recording current programme One Touch Recording
- 29 -
■■How to change the code
Each Panasonic product has its own remote control code. Change the code according to the product for operation.
1.Press and hold Standby On / Off switch during the following operations
2.Enter the appropriate code as follows with numeric buttons
●● Codes for each product and features
70: DVD Recorder, DVD Player, Blu-ray Disc Player
71: Player theatre, Blu-ray Disc theatre
72: VCR
73 (default):
Using in USB HDD recording, Media Player, DLNA features, product using in VIERA Link
3. Press |
to change |
= Note = |
|
●●
●●
●●
Confirm if the remote control works correctly after changing the code. The codes may be reset to defaults if batteries are replaced.
Some operations may not be available depending on the equipment.
HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-compression standard.
HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment.
HDMI-compatible equipment with an HDMI or DVI output terminal, such as a
DVD player, a set top box or game equipment, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
Watching External equipment External connection
: The HDMI logo is displayed on HDMI-compliant equipment.
- 30 -