Panasonic SC-HC302GN-K User Manual
This illustration shows SC-HC302.
Operating Instructions
Compact Stereo System
Model No. SC-HC302
SC-HC300
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.
GN
GS
TQBJ2074-1
These operating instructions are applicable for models
SC-HC302 and SC-HC300.
[HC302]:
Indicate features applicable to SC-HC302.
[HC300]:
Indicate features applicable to SC-HC300.
Unless otherwise indicated, illustrations in these operating
instructions are of SC-HC302. Your system and the
illustrations can look differently.
Product Identification Marking is located on the bottom
of the unit.
The holes at the back are used only by the retailers for
product display purposes.
Panasonic cannot be held responsible for any property
damage and/or serious injury, including death resulting
from improper use of these holes.
Table of contents
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Note on AC mains lead . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Making the connections . . . . . . . . . . . . . . . . . . . . . . . . . 4
Preparing the remote control . . . . . . . . . . . . . . . . . . . . . 4
Overview of controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Preparing the media . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Media playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
DAB/DAB+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Clock and timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Sound effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
External music device . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Limited Warranty (For Australia only) . . . . . . . . . . . . . . 19
TQBJ2074
2
Safety precautions
WARNING!
Unit
• To reduce the risk of fire, electric shock or product
damage,
– Do not expose this unit to rain, moisture, dripping or
splashing.
– Do not place objects filled with liquids, such as vases,
on this unit.
– Use the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
– Do not let metal objects fall inside this unit.
CAUTION!
Unit
• To reduce the risk of fire, electric shock or product
damage,
– Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space. Ensure this unit
is well ventilated.
– Do not obstruct this unit’s ventilation openings with
newspapers, tablecloths, curtains, and similar items.
– Do not place sources of naked flames, such as
lighted candles, on this unit.
• [HC302]
This unit is intended for use in moderate climates.
[HC300]
This unit is intended for use in tropical and moderate
climates.
• This unit may receive radio interference caused by
mobile telephones during use. If such interference
occurs, please increase separation between this unit
and the mobile telephone.
• This unit utilizes a laser. Use of controls or adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
AC mains lead
• The mains plug is the disconnecting device. Install this
unit so that the mains plug can be unplugged from the
socket outlet immediately.
Battery
• Danger of explosion if battery is incorrectly replaced.
Replace only with the type recommended by the
manufacturer.
• When disposing of the batteries, please contact your
local authorities or dealer and ask for the correct
method of disposal.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in a car exposed to direct
sunlight for a long period of time with doors and
windows closed.
• Do not break open or short-circuit the battery.
• Do not charge the alkaline or manganese battery.
• Do not use the battery if the cover has peeled off.
• Remove the battery if you do not use the remote control
for a long period of time. Keep in a cool, dark area.
Note on AC mains lead
Fuse cover
Fuse (5 ampere)
Fuse (5 ampere)
(For the AC mains plug of three pins)
For your safety, please read the following text carefully.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC
mains plug (figures A and B). Confirm the AC mains plug
fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Figure A Figure B
2. Replace the fuse and close or attach the fuse cover.
Figure A Figure B
[HC300]
This telecommunication equipment conforms to
NTC/NBTC technical requirement.
Connection and use of this communications equipment
is permitted by the Nigerian Communications
Commission.
[HC302]
Disposal of Old Equipment and Batteries
Only for European Union and countries
with recycling systems
This symbol is only valid in the European
Union.
If you wish to discard this product, please
contact your local authorities or dealer and
ask for the correct method of disposal.
Supplied accessories
Check and identify the supplied accessories.
[HC302]
1 AC mains lead
[HC300]
3 AC mains leads
For Saudi Arabia
[HC302]
1 DAB indoor antenna
[HC300]
1 FM indoor antenna
1 Remote control
(N2QAYB000944)
1 Remote control battery
The symbols on this product (including the
accessories) represent the following:
AC
DC
Class II equipment (The construction of the
product is double-insulated.)
! ON
` Standby
TQBJ2074
3
Making the connections
Adhesive tape
(not supplied)
Be sure to
tighten the nut
fully.
Adhesive tape
(not supplied)
To household
mains socket
Connect the AC mains lead only after all the other
connections have been made.
[HC300][HC302]
1 [HC302]
Connect the DAB indoor antenna.
Rotate the antenna at to improve reception.
Note:
• Do not use any other DAB antenna except the supplied one.
• Do not mount the DAB antenna on metal objects such as
water pipes or any metal parts of the building.
[HC300]
Connect the FM indoor antenna.
2 Connect the AC mains lead.
Do not use any other AC mains lead except the
supplied one.
Conserving power
The system consumes a small amount of power
(~17) even when it is in standby mode. Disconnect
the power supply if you do not use the system.
Some settings will be lost after you disconnect the
system. You have to set them again.
Note:
• These speakers do not have magnetic shielding. Do not put
them near TVs, PCs or other equipment easily influenced by
magnetism.
• Tape the antenna to a wall with the least amount of
interference.
• Use an outdoor antenna (not supplied) if reception is poor.
Preparing the remote control
TQBJ2074
4
Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.
Overview of controls
Top view
[HC302]
[HC302]
Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same.
A Standby/on switch [`], [1]
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still consuming
a small amount of power.
B Select the audio source
On the remote control:
Press the corresponding button to select the source.
[ ]: BLUETOOTH
[USB/CD]: USB CD
[RADIO/AUX]:
On the main unit:
Select “BLUETOOTH” as the audio source
To start Bluetooth
device, press and hold the corresponding button.
®
pairing or disconnect a Bluetooth
C Basic playback control
D View the setup menu
E View the content information
F Select or confirm the option
G Open or close the sliding door
H Decrease the brightness of the display panel
To cancel, press the button again.
I Adjust the volume level
J Mute the sound
To cancel, press the button again.
“MUTE” is also cancelled when you adjust the volume
or when you switch off the system.
K View the play menu
L Select the sound effects
M AUX IN terminal (~12)
N USB port ( ) (~13)
O Sliding door
P Display panel
Q Remote control sensor
Distance: Within approximately 7 m
Angle: Approximately 20° up and down, 30° left
and right
TQBJ2074
5
Preparing the media
USB device
(not supplied)
Disc
1 Press [USB/CD] to select “CD”.
2 Press [CD x] (main unit: [x]) to open the sliding
door.
Put in a disc with the label facing towards you.
3 Press [CD x] (main unit: [x]) again to close the
sliding door.
Keep fingers away from the sliding door when it is
closing.
USB
Bluetooth
You can connect and play an audio device wirelessly
through Bluetooth
Preparation
• Switch on the Bluetooth
the device near the system.
• Read the operating instructions of the device for details.
█
Pairing a device
Preparation
If this system is connected to a Bluetooth
disconnect it. (~7)
®
®
.
®
feature of the device and put
®
device,
1 Press [ ] to select “BLUETOOTH”.
If “PAIRING” is shown, continue with step 3.
2 Press [PLAY MENU] to select “PAIRING”.
Or press and hold [SELECTOR/ – PAIRING] on the
main unit until “PAIRING” is shown.
3 Select “SC-HC302” or “SC-HC300” from the
Bluetooth
If prompted for a passkey, input “0000”.
The device connects with this system automatically
after pairing is complete.
The MAC address (example: 6C:5A:B5:B3:1D:0F)
may be shown before “SC-HC302” or “SC-HC300” is
shown.
The name of the connected device is shown for a few
seconds.
Note:
You can pair up to 8 devices with this system. If a 9th device is
paired, the device that has not been used for the longest time
will be replaced.
®
menu of the device.
Press [USB/CD] to select “USB”.
Note:
Do not use a USB extension cable. The system cannot
recognise USB device connected through a cable.
TQBJ2074
6
█
Connecting a device
Preparation
If this system is connected to a Bluetooth
disconnect it. (~7)
®
device,
1 Press [ ] to select “BLUETOOTH”.
“BLUETOOTH READY” is shown.
2 Select “SC-HC302” or “SC-HC300” from the
Bluetooth
The name of the connected device is shown for a few
seconds.
®
menu of the device.
3 Start playback on the device.
Note:
• A device must be paired to connect.
• This system can only connect to one device at a time.
•
When “BLUETOOTH” is selected as the source, this system
will automatically try to connect to the last connected device.
(“LINKING” is shown during this process.)
Loading...