Panasonic SC-HC25DB Operating Instructions

Dear Customer

A
D

T
K
E

Q
R
S

X

W

V

U

Thank you for purchasing this system.
For optimum performance and safety, read

these instructions fully before you connect,
operate or adjust this system.

Keep this manual for future reference.

Your system and the illustrations can look
differently.

Do the procedures with the remote
control. You can also use the buttons
on the main unit if they are the same.

Note:

“EB” on the packaging indicates the United Kingdom.

Panasonic Corporation

Web Site: http://panasonic.net

Pursuant to at the directive 2004/108/EC, article 9(2)

Panasonic Testing Centre
Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

Bottom of product

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE,

• DO NOT EXPOSE THIS APPARATUS
TO RAIN, MOISTURE, DRIPPING OR
SPLASHING AND THAT NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.

• USE ONLY THE RECOMMENDED
ACCESSORIES.

• DO NOT REMOVE THE COVER (OR BACK);
THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

CAUTION!

• DO NOT INSTALL OR PLACE THIS UNIT IN
A BOOKCASE, BUILT-IN CABINET OR IN
ANOTHER CONFINED SPACE. ENSURE
THE UNIT IS WELL VENTILATED. TO
PREVENT RISK OF ELECTRIC SHOCK OR
FIRE HAZARD DUE TO OVERHEATING,
ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE
VENTILATION VENTS.

• DO NOT OBSTRUCT THE UNIT’S
VENTILATION OPENINGS WITH
NEWSPAPERS, TABLECLOTHS, CURTAINS,
AND SIMILAR ITEMS.

• DO NOT PLACE SOURCES OF NAKED
FLAMES, SUCH AS LIGHTED CANDLES, ON
THE UNIT.

• DISPOSE OF BATTERIES IN AN
ENVIRONMENTALLY FRIENDLY MANNER.

CAUTION!

THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.

Operating Instructions

Compact Stereo System

Model No. SC-HC25DB

SUPPLIED ACCESSORIES

Use numbers indicated in parentheses when asking
for replacement parts. (Product numbers correct as of
February 2011. These may be subject to change.)

1 x AC mains lead

(K2CZ3YY00005)

1 x Remote control

(N2QAYB000640)

THIS UNIT IS INTENDED FOR USE IN
MODERATE CLIMATES.

The socket outlet shall be installed near the
equipment and easily accessible.
The mains plug of the power supply cord shall
remain readily operable.
To completely disconnect this apparatus from the
AC Mains, disconnect the power supply cord plug
from AC receptacle.

This product may receive radio interference
caused by mobile telephones during use. If
such interference is apparent, please increase
separation between the product and the mobile
telephone.

Product identification marking is located on the
bottom of unit.

“Made for iPod” and “Made for iPhone” mean
that an electronic accessory has been designed
to connect specifically to iPod, or iPhone,
respectively, and has been certified by the
developer to meet Apple performance standards.

Apple is not responsible for the operation of this
device or its compliance with safety and regulatory
standards.

Please note that the use of this accessory with
iPod, or iPhone may affect wireless performance.

iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered in
the U.S. and other countries.

MPEG Layer-3 audio coding technology licensed
from Fraunhofer IIS and Thomson.

Inside of product

1 x DAB antenna

(N1EADY000001)

1 x Remote control

battery

EB

RQTX1252-1B

L0111CH1041

EU

En

SAFETY PRECAUTIONS

Placement

Set the system up on an even surface away from
direct sunlight, high temperatures, high humidity,
and excessive vibration. These conditions can
damage the cabinet and other components, thereby
shortening the service life of the system.

Place it at least 15 cm away from wall surfaces to
avoid distortion and unwanted acoustical effects.

Do not place heavy items on the system.

Voltage

Do not use high voltage power sources. This can
overload the system and cause a fire.

Do not use a DC power source. Check the source
carefully when setting the system up on a ship or
other place where DC is used.

AC mains lead protection

Ensure the AC mains lead is connected correctly
and not damaged. Poor connection and lead
damage can cause fire or electric shock. Do not
pull, bend, or place heavy items on the lead.

Grasp the plug firmly when unplugging the lead.
Pulling the AC mains lead can cause electric shock.

Do not handle the plug with wet hands. This can
cause electric shock.

Foreign matter

Do not let metal objects fall inside the system. This
can cause electric shock or malfunction.

Do not let liquids get into the system. This can
cause electric shock or malfunction. If this occurs,
immediately disconnect the system from the power
supply and contact your dealer.

Do not spray insecticides onto or into the system.
They contain flammable gases which can ignite if
sprayed into the system.

Service

Do not attempt to repair this system by yourself.
If sound is interrupted, indicators fail to light,
smoke appears, or any other problem that is not
covered in these instructions occurs, disconnect
the AC mains lead and contact your dealer or an
authorised service centre. Electric shock or damage
to the system can occur if the system is repaired,
disassembled or reconstructed by unqualified
persons.

Extend operating life by disconnecting the system
from the power source if it is not to be used for a
long time.

CAUTION FOR AC MAINS LEAD

For your safety, please read the following text
carefully.

This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure
that the replacement fuse has a rating of 5-ampere
and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
the body of the fuse.

If the plug contains a removable fuse cover you
must ensure that it is refitted when the fuse is
replaced.

If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local dealer.

CAUTION!

IF THE FITTED MOULDED PLUG IS
UNSUITABLE FOR THE SOCKET OUTLET IN
YOUR HOME THEN THE FUSE SHOULD BE
RE MOVED AND THE PLUG CUT OFF AND
DIS POSED OF SAFELY.
THERE IS A DANGER OF SEVERE
ELECTRICAL SHOCK IF THE CUT OFF
PLUG IS IN SERTED INTO ANY 13-AMPERE
SOCKET.

If a new plug is to be fitted please observe the
wiring code as stated below.
If in any doubt please consult a qualified electrician.

IMPORTANT

The wires in this mains lead are coloured in
accordance with the following code:
Blue: Neutral, Brown: Live.

As these colours may not correspond with the
coloured markings identifying the terminals in your
plug, proceed as follows:

The wire which is coloured Blue must be connected
to the terminal which is marked with the letter N or
col oured Black or Blue.

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols on the products,
packaging, and/or accompanying
documents mean that used electrical
and electronic products and batteries
should not be mixed with general
household waste.
For proper treatment, recovery
and recycling of old products and
used batteries, please take them
to applicable collection points,
in accordance with your national
legislation and the Directives
2002/96/EC and 2006/66/EC.

By disposing of these products and
batteries correctly, you will help to
save valuable resources and prevent
any potential negative effects on
human health and the environment
which could otherwise arise from
inappropriate waste handling.

For more information about collection
and recycling of old products and
batteries, please contact your local
municipality, your waste disposal
service or the point of sale where you
purchased the items.

Penalties may be applicable for
incorrect disposal of this waste, in
accordance with national legislation.

or the BSI mark on

The wire which is coloured Brown must be
connected to the terminal which is marked with the
letter L or coloured Brown or Red.

WARNING: DO NOT CONNECT EITHER WIRE
TO THE EARTH TERMINAL WHICH IS MARKED
WITH THE LETTER E, BY THE EARTH SYMBOL

OR COLOURED GREEN OR GREEN/YELLOW.

THIS PLUG IS NOT WATERPROOF—KEEP DRY.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type
of AC mains plug (figures A and B). Confirm the AC
mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

Figure A Figure B

2. Replace the fuse and close or attach the fuse
cover.

Figure A Figure B

Fuse (5 ampere)

For business users in the
European Union

If you wish to discard electrical and
electronic equipment, please contact
your dealer or supplier for further
information.

[Information on Disposal in other
Countries outside the European
Union]

These symbols are only valid in
the European Union. If you wish to
discard these items, please contact
your local authorities or dealer and
ask for the correct method of disposal.

Note for the battery symbol
(bottom two symbol examples):

This symbol might be used in
combination with a chemical symbol.
In this case it complies with the
requirement set by the Directive for
the chemical involved.

Fuse (5 ampere)

Fuse cover

■ Sales and Support Information

Customer Care Centre

• For customers within the UK: 0844 844 3852

• For customers within Ireland: 01 289 8333

• Visit our website for product information
www.panasonic.co.uk

• E-mail: [e-mail]

Direct Sales at Panasonic UK

• For customers: 0844 844 3856

• Order accessory and consumable items for your product with ease and confidence by phoning our
Customer Care Centre Monday–Thursday 9:00 a.m.– 5:30 p.m., Friday 9:30 a.m.– 5:30 p.m. (Excluding
public holidays).

• Or go on line through our Internet Accessory ordering application at www.pas-europe.com.

• Most major credit and debit cards accepted.

• All enquiries transactions and distribution facilities are provided directly by Panasonic UK.

• It couldn’t be simpler!

• Also available through our Internet is direct shopping for a wide range of finished products, take a browse
on our website for further details.

SPECIFICATIONS

Amplifier section

RMS output power stereo mode

Front Ch (both ch driven)
5 W per channel (6
Total RMS stereo mode power 10 W

), 1 kHz, 10% THD

FM tuner, terminals section

Preset station FM 30 stations
Frequency modulation (FM)

Frequency range

87.50 MHz to 108.00 MHz (50 kHz step)
Antenna terminals 75

Headphones jack

Terminal Stereo, 3.5 mm jack

AUX (rear)

Terminal Stereo, 3.5 mm jack

(unbalanced)

DAB section

DAB memories 20 channels
Frequency band (wavelength)

Band III (UK only)
10B to 12D (211.648 MHz to 229.072 MHz)
Band III (Europe)
5A to 13F (174.928 MHz to 239.200 MHz)

Sensitivity

Min requirement –98 dBm

DAB external antenna

Terminal F - Connector (75

BER 4x10

-4

Disc section

Disc played (8 cm or 12 cm)

CD, CD-R/RW (CD-DA, MP3 

MPEG-1 Layer 3, MPEG-2 Layer 3

Pick up

Wavelength 790 nm (CD)
Laser power CLASS 1 (CD)

Audio output (Disc)

Number of channels 2 ch (FL, FR)
FL = Front left channel
FR = Front right channel

3

OVERVIEW OF CONTROLS

A

SLEEP

formatted disc)

PLAY

I

J

B

K

C
D

EXT-IN

RADIO

L

E

F

D.BASS

SOUND

PRESET EQ

M

G

H

DISPLAY

DIMMER

AUTO OFF

N

O

P

USB section

USB port

USB Standard USB 2.0 full speed
Media file format support MP3 (
USB device file system FAT 12, FAT 16, FAT 32
USB port power 500 mA (max)

Speaker section

Type 1 way, 1 speaker system (bass reflex)
Speaker unit(s)

Full range 8 cm cone type

Impedance 6
Frequency range 60 Hz to 25 kHz (–16 dB)

90 Hz to 22 kHz (–10 dB)

General

Power supply AC 220 to 240 V, 50 Hz
Power consumption 19 W
Dimensions (W x H x D)
400 mm x 221 mm x 110 mm

[D = 69 mm (min)]
[D = 149 mm (tray open)]

Mass 2.1 kg
Operating temperature range 0°C to +40°C
Operating humidity range
35% to 80% RH (no condensation)

Power consumption in standby mode

)

Note:

1) Specifications are subject to change without notice.
Mass and dimensions are approximate.

2) Total harmonic distortion is measured by the digital
spectrum analyzer.

Refer to the numbers in parentheses for
chapter references.

A Standby/on switch [`], [1] (8, 12)

Press to switch the unit from on to standby
mode or vice versa. In standby mode, the
unit is still consuming a small amount of
power.

B Numeric buttons [1 to 9, 0, ≧10]

To select a 2-digit number
Example: 16: [≧10] → [1] → [6]

C Delete a programmed track (4)

D Select source

[iPod]: Select iPod (5)
[CD]: Select disc (4)
[RADIO, EXT-IN]: Select radio, DAB, USB

or AUX (6, 7, 10)

E Basic operation

[4/9]: Playback or pause operation
[8]: Stop playback
[2], [6]: Skip track

Select preset radio station

[3], [5]: Search track

Tune in to the radio station

[2/3], [5/6]: Skip and search

F Select the sound effects (9)

G Select the iPod menu item (5)

H View the information shown on the display

panel.

Decrease the brightness of the display
panel

Press and hold the button to use this
function.
To cancel, press and hold the button again.

I Set the sleep timer (8)

Set the clock and timer (8)

J Set the program function (4, 6, 7)

0.2 W (approximate)

track
Select preset
radio station

.mp3)

1

Conserving power

The system consumes approximately 0.2 W when it is in standby mode. Disconnect the power supply if
you do not use the system.
Some settings will be lost after you disconnect the system. You have to set them again.

1

2

Note:

• These speakers do not have magnetic shielding. Do not put them near TVs, PCs or other equipment easily

• You cannot remove the net of the speakers.

• The DAB outdoor antenna should be installed by a competent technician.

• Never use outdoor antenna during lightning storm.

2

K Adjust the volume of the system

L Mute the sound of the system

Press the button again to cancel.
“MUTE” is also cancelled when you adjust
the volume or when you switch off the
system.

M Set the play menu item (4)

N Set the radio menu item (6, 7)

O [R, T]: Skip album

Adjust clock setting

[Y, U]: Select the item in the menu
[OK]: Confirm the setting

P Automatically switch off the system

This function switches off the system
(except in radio source) if you do not use
the system for approximately 30 minutes.
To cancel, press the button two times.

Q Headphones jack (

Plug type: Ø 3.5 mm stereo (not included)

• Avoid listening for prolonged periods of time
to prevent hearing damage.

• Excessive sound pressure from earphones
and headphones can cause hearing loss.

• Listening at full volume for long periods may
damage the user’s ears. Be sure to use the
supplied or recommended headphones or
earphones.

R AUX jack

S USB port (

T Open or close the sliding door

U Display panel

V Sliding door

W Remote control sensor

X Open or close the iPod or iPhone dock

MAKING THE CONNECTIONS

Connect the DAB antenna.

Place the antenna where reception is best.
Use DAB outdoor antenna for better reception.

Be sure to fully
tighten the screw.

Connect the AC mains lead.

READ THE CAUTION FOR AC MAINS LEAD BEFORE CONNECTION.

Use the included AC mains lead with this system only.
Do not use an AC mains lead from other equipment.

influenced by magnetism.

PREPARING THE REMOTE CONTROL

Use alkaline or manganese battery.

Install the battery so that the poles (+ and –) align
with those in the remote control.

Point the remote control at the remote control
sensor, away from obstacles, at a maximum range
of 7 m directly in front of the main unit.

)

)

Adhesive tapes

Top view

Front view

DAB outdoor antenna
(not included)

Be sure to fully
tighten the screw.

CAUTION!

• Do not break open or short-circuit the battery.

• Do not charge the alkaline or manganese battery.

• Do not use the battery if the cover has peeled off.

• Do not heat or expose to flame.

• Do not leave the battery(ies) in an automobile
exposed to direct sunlight for a long period of time
with doors and windows closed.

• Mishandling of battery can cause electrolyte leakage,
which can cause a fire.

• Remove the battery if you do not use the remote
control for a long period of time. Keep in a cool, dark
area.

CAUTION!

Danger of explosion if battery is incorrectly
replaced. Replace only with the same
or equivalent type recommended by the
manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.

4

DISCS

USING AN iPod OR iPhone (continued) DAB (continued)

11

REMOTE CONTROL CODE

Playing discs

1 Press [CD

unit to open the sliding door.

Put in a disc with the label facing towards you.
Press [CD x, OPEN/CLOSE] again to close the
sliding door.

2 Press [CD] and then press [

playback.

Keep fingers away from the sliding door when it
is closing.

Stop
playback

Pause
playback

Skip album

Skip track

Search
through track

, OPEN/CLOSE] on the main

x

Click!

] to star t

4/9

Press [8] during playback.

Press [4/9] during playback.
Press again to continue playback.

Press [R, T].

Press [2] or [6] (main unit:
[2/3] or [5/6]).

Press and hold [3] or [5]
(main unit: [2/3] or
[5/6]).

Playmode function

1 Press [PLAY MENU] to select “PLAYMODE”.
2 Press [

the desired mode.

OFF
PLAYMODE

1-TRACK

1TR

1-ALBUM

1ALBUM

RANDOM

RND

1- ALBUM
RANDOM

1ALBUM RND

Note:

• During random playback, you cannot skip to tracks
which have been played or press the numeric
buttons.

• This function does not work with “Program playback”.

• The setting returns to the default “OFF PLAYMODE”
when you open the sliding door.

Repeat playback

You can repeat “Program playback” or other
selected “Playmode function”.

] and then press [OK] to select

Y, U

Play all tracks.

Play one selected track on the
disc.
Press the numeric buttons to
select the track.
Playback starts from the selected
track.

Play one selected album on the
disc.
Press [R, T]

Play a disc randomly.

Play all tracks in one selected
album randomly.
Press [R, T]

to select the album.

to select the album.

1 Press [PLAY MENU] to select “REPEAT”.
2 Press [

then press [OK].

“ ” is shown.
To cancel, select “OFF REPEAT”.

5

1 Push [

] to select “ON REPEAT” and

Y, U

USING AN iPod OR iPhone

, iPod] to open the dock tray.

x

2 Insert a compatible dock adapter.

iPhone (not included)

Connector

Dock adapter
(not included)

3 Connect the iPod or iPhone firmly.

Make sure to remove the iPod or iPhone from
its case.

4 Press [iPod] and then press [

playback.

4/9

] to star t

Program playback

This function allows you to program up to 24 tracks.

1 Press [PROGRAM] in the stop mode.

“PGM” is shown.

2 Press the numeric buttons to select the

desired track.

Do this step again to program other tracks.

3 Press [

] to star t playback.

4/9

1 Press [PROGRAM] in the stop mode.
2 Press [
3 Press [

buttons to select the desired track.

] to select the desired album.

R, T

] and then press the numeric

6

4 Press [OK].

Do steps 2 through 4 again to program other
tracks.

5 Press [

Cancel
program
mode

Replay the
program

Check
program
contents

Clear the last
track

Clear all
programmed
tracks

Note:

The program memory is cleared when you open the
sliding door.

Viewing available information

You can view the available information on the
display panel.

Press [DISPLAY].

Note:

• Maximum characters that can be shown:
approximately 30

• This system supports ver. 1.0, 1.1 and 2.3 ID3 tags.

• Text data that the system does not support can show
differently.

Note on CDs

• This system can access up to 99 tracks.

• This system can play MP3 files and CD-DA format
audio CD-R/RW that have been finalised.

• This system can fail to play some CD-R/RW because
of the condition of the recording.

Note on MP3s

• Files are treated as tracks and folders are treated as
albums.

• This system can access up to 999 tracks, 255 albums
(including root folder) and 20 sessions.

• Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).

• To play in a certain order, prefix the folder and file
names with 3-digit numbers in the order you want
them to play.

Limitations on MP3 playback

• If you have recorded MP3s on the same disc as
CD-DA, only the format recorded in the first session
can be played.

• Some MP3s cannot be played because of the
condition of the disc or recording.

• Recordings will not necessarily be played in the order
you recorded them.

Pause playback

Skip track

Search the
current track

View iPod or
iPhone menu,
Return to
previous menu

Select an iPod
or iPhone menu
item

Note:

• Make sure to align your iPod or iPhone with the
connector when inserting the iPod or iPhone.

• The operations may vary or not work depending on
the iPod or iPhone models.

• Depending on the model, it may be necessary to
remove the iPod or iPhone and select the album,
artist, etc. on the iPod or iPhone.

• Read the User Guide of the iPod or iPhone for
operating instructions.

] to star t playback.

4/9

Press [PROGRAM] in the stop
mode.

Press [PROGRAM] and then
press [4/9].

Press [2] or [6] when
“PGM” is shown in the stop
mode.
To check while programming,
press [PROGRAM] two times
after “PGM” is shown, then press
[2] or [6].

Press [DEL] in the stop mode.

Press [8] in the stop mode.
“CLR ALL” is shown. Within 5
seconds, press [8] again.

Press [4/9] or [8].

Press [2] or [6] (main
unit: [2/3] or [5/6]).

Press and hold [3] or [5]
(main unit: [2/3] or
[5/6]).

Press [iPod MENU] in the play
mode.

Press [R, T] and then press
[OK].

Compatible iPod and iPhone

Update your iPod or iPhone with the latest software
before using this system.
Compatibility depends on the software version of
your iPod or iPhone.

• iPod touch 4th generation (8GB, 32GB, 64GB)

• iPod nano 6th generation (8GB, 16GB)

• iPod touch 3rd generation (32GB, 64GB)

• iPod nano 5th generation (video camera)
(8GB, 16GB)

• iPod touch 2nd generation (8GB, 16GB, 32GB)

• iPod classic [120GB, 160GB (2009)]

• iPod nano 4th generation (video) (8GB, 16GB)

• iPod classic (160GB) (2007)

• iPod touch 1st generation (8GB, 16GB, 32GB)

• iPod nano 3rd generation (video) (4GB, 8GB)

• iPod classic (80GB)

• iPod nano 2nd generation (aluminum)
(2GB, 4GB, 8GB)

• iPod 5th generation (video) (60GB, 80GB)

• iPod 5th generation (video) (30GB)

• iPod nano 1st generation (1GB, 2GB, 4GB)

• iPhone 4 (16GB, 32GB)

• iPhone 3GS (8GB, 16GB, 32GB)

• iPhone 3G (8GB, 16GB)

• iPhone (4GB, 8GB, 16GB)

6

RADIO

Manual tuning

1 Press [RADIO, EXT-IN] to select “FM”.
2 Press [

of the required station.

To tune automatically, press and hold the button
until the frequency starts changing quickly.

To improve the sound quality

] or [5] to select the frequency

3

1 Press [RADIO MENU] to select “FM MODE”.
2 Press [

press [OK].

To cancel, select “STEREO”.

• “MONO” is also cancelled when you change the
frequency.

• Turn off “MONO” for normal listening.

Automatic presetting

30 FM stations can be preset.

Preparation

Press [RADIO, EXT-IN] to select “FM”.

] to select “MONO” and then

Y, U

1 Press [OK] to select “LOWEST” or

“CURRENT” frequency.

7

DAB (Digital Audio Broadcasting) is a procedure
of broadcasting the radio digitally. It gives less
interference and better quality sound.

This system support DAB in “BAND III” bands.

DAB

DAB operation

1 Press [RADIO, EXT-IN] to select “DAB”.

If you select DAB for the first time, the system
will start the “DAB AUTO SCAN” procedure.

2 Press [

the required station.

] or [5] select the frequency of

3

DAB auto scan

1 Press [RADIO MENU] to select

“AUTOSCAN” and then press [OK].

“START?” is shown.

2 Press [OK].

“DAB AUTO SCAN” is shown.

Note:

If no station is detected, “SCAN FAILED” is shown.

Memory presetting

20 stations can be preset.

1 Press [

] or [5] to select a station.

3

2 Press [PROGRAM].
3 Press the numeric buttons to select a preset

number.

Do steps 1 through 3 again to preset more
stations.
The new station replaces any station that
occupies the same preset number.

Note:

You cannot preset a station when the station is not
broadcasting or when you have selected a secondary
service.

Selecting a preset station

Press the numeric buttons, [2] or [6] (main
unit: [2/3] or [5/6]) to select the
preset station.

Charging an iPod or iPhone

An iPod or iPhone is charged automatically when
connected to the system (even when the system is
in standby mode).

• See the iPod or iPhone display for its battery
charging status.

• Disconnect the iPod or iPhone if it is not used
for an extended period of time after charging is
complete.

• Charging stops when the battery is fully charged.
The battery will deplete naturally.

Note on iPhone

• All phone features can only be controlled by the touch
screen of the iPhone.

• The system does not show incoming calls or the
phone status.

• Playback will stop when there is an incoming call.

• A call is not cancelled when you connect or
disconnect the iPhone from the system.

• There is no Apple Inc. specification that will guarantee
the above iPhone response. iPhone responses can
be different on newer models or with new software.

2 Press [RADIO MENU] to select “A.PRESET”

and then press [OK].

“START?” is shown.

3 Press [OK] to start presetting.

Manual presetting

30 FM stations can be preset.

Preparation

Press [RADIO, EXT-IN] to select “FM”.

1 Press [

station.

] or [5] to tune in to the

3

2 Press [PROGRAM].
3 Press the numeric buttons to select a preset

number.

Do steps 1 through 3 again to preset more
stations.

The new station replaces any station that
occupies the same preset number.

Selecting a preset station

Press the numeric buttons, [2] or [6] (main
unit: [2/3] or [5/6]) to select the
preset station.

Listening to secondary services

1 Press [RADIO MENU] to select “DAB

SECONDARY”.

2 Press [

and then press [OK].

”

“

is shown.

To return to primary service

] to select a secondary ser vice

Y, U

1 Press [RADIO MENU] to select “DAB

SECONDARY”.

2 Press [

press [OK].

] to select “PRIMARY” and then

Y, U

Viewing available information

Press [DISPLAY] to view available information.

You can view information about the DAB broadcast,
program type, ensemble label, frequency and time.

Auto clock adjustment

1 Press [RADIO MENU] to select “AUTO

CLOCK ADJ”.

2 Press [

then press [OK].

To cancel, select “OFF ADJUST”.

] to select “ON ADJUST” and

Y, U

DAB signal quality

When adjusting the antenna, you can check the
reception quality.

1 Press [RADIO MENU] to select “SIGNAL

QUALITY”.

2 Press [

Frequency
block

] to select frequency.

Y, U

Frequency Reception quality

0 (poor) to 8 (excellent)

Auto scan frequency

Only the frequencies currently used in United
Kingdom as of February 2011 on BAND III are Auto
scanned.

Select “ALL BAND III” when you want to store
stations on other frequencies to memory.

8

CLOCK AND TIMERS

Setting the clock

This is a 24-hour clock.

1 Press [CLOCK/TIMER] to select “CLOCK”.
2 Within 10 seconds, press [

time.

R, T

] to set the

3 Press [OK].

Press [CLOCK/TIMER] to show the clock for a few
seconds.

Note:

Reset the clock regularly to maintain accuracy.

Sleep timer

The sleep timer switches off the system after the
set time.

Press [SLEEP] to select the setting (in minutes).

To cancel, select “OFF”.

30 MIN OFF→120 MIN→→ 60 MIN→90 MIN

To show the remaining time

Press [SLEEP].

Note:

• The sleep timer can be used together with the play
timer.

• The sleep timer always comes first. Be sure not to set
an overlap of timers.

Play timer

You can set the timer to come on at a certain time
to wake you up.

Switch on the system and set the clock.

Prepare the music source you want to listen to
(disc, radio, DAB, iPod, iPhone, USB or AUX) and
set the volume.

9

SOUND EFFECTS

Changing the sound quality

1 Press [SOUND] to select a sound effect.
2 Within 3 seconds, press [

desired setting.

BASS -4 to +4

TREBLE

SURROUND “ON SURROUND” or

INPUT
LEVEL
(For AUX
source)

10

USB

You can connect and play MP3 tracks from your
USB mass storage device.

Do not use a USB extension cable. The system
cannot recognize USB mass storage device
connected through a cable.

“OFF SURROUND”

“NORMAL” or “HIGH”

EXTERNAL EQUIPMENT

] to select the

Y, U

1 Decrease the volume and connect the USB

mass storage device to the USB port.

2 Press [RADIO, EXT-IN] to select “USB” and

then press [4/9] to star t playback.

Stop
playback

For other operations, refer to “DISCS”.

Compatible devices

• USB mass storage devices that support bulk-only
transfer.

• USB mass storage devices that support USB 2.0 full
speed.

Supported format

• Folders are defined as album.

• Files are defined as track.

• Track must have the extension “.mp3” or “.MP3”.

• CBI (Control/Bulk/Interrupt) is not supported.

• NTFS file system is not supported (only FAT 12/16/32
file system is supported).

• Some files can fail to work because of the sector size.

Press [8] during playback.
“RESUME” is shown.
Press [4/9] to continue
playback.
OR
Press [8] two times to stop the
playback fully.

1 Press [RADIO MENU] to select “SCANMODE”.
2 Press [

or “ALL BAND III” and then press [OK].

Auto scan begins automatically after you make
the changes.

1 Press [CLOCK/TIMER] to select “

“#PLAY 2” or “#PLAY 3”.

2 Within 10 seconds, press [

start time.

] to select “UNITED KINGDOM”

Y, U

] to set the

R, T

PLAY 1”,

#

3 Press [OK].
4 Do steps 2 and 3 again to set the end time.

To start the timer

5 Press [

“#PLAY 2” or “#PLAY 3”.

6 Press [

The system must be switched off for the timer to
operate.

Change the
settings

Change the
source or
volume

Check the
settings

Cancel

Note:

• The play timer starts at a low volume and increases
gradually to the preset level.

• The timer comes on at the set time every day if the
timer is on.

• If you switch off the system and switch on again while
a timer is in operation, the timer will not stop at the
end time.

, PLAY] to start “#PLAY 1”,

#

] to switch off the system.

`

Do steps 1 through 4 and 6 again
(Z above).

1) Press [#, PLAY] two times to
remove the timer indicator on
the display panel.

2) Change the source or volume.

3) Do steps 5 and 6 (Z above).

Press [CLOCK/TIMER] to select
“#PLAY 1”, “#PLAY 2” or
“#PLAY 3”.

Press [#, PLAY] two times to
remove the timer indicator on the
display panel.

Preset EQ

Press [PRESET EQ] to select a setting.

HEAVY Adds punch to rock

SOFT For background music

CLEAR Clarifies higher frequencies

VOCAL Adds gloss to vocal

FLAT Cancels the sound effect

D.BASS

This function lets you enjoy a powerful bass effect.

Press [D.BASS] to select “ON D.BASS” or
“OFF D.BASS”.

Note:

• Maximum album: 255 albums (including root folder)

• Maximum track: 2500 tracks

• Maximum track in one album: 999 tracks

Using the auxiliary input

You can connect a portable audio equipment and
listen to the audio through this system.

Preparation

Switch off the equalizer (if any) of the portable audio
equipment to prevent sound distortion.
Decrease the volume of the system and the
portable audio equipment before you connect or
disconnect the portable audio equipment.

1 Connect the portable audio equipment.

Plug type: Ø 3.5 mm stereo (not included)

2 Press [RADIO, EXT-IN] to select “AUX”.
3 Play the portable audio equipment.

To adjust the audio input level (Z “Changing
the sound quality”).

Select “NORMAL” if the sound is distorted during
“HIGH” input level.

Note:

• Read the operating instructions of the portable audio
equipment for details.

• Components and cables are sold separately.

When other Panasonic equipment respond to the
remote control of this system, change the remote
control code of this system.

Preparation

Press [RADIO, EXT-IN] to select “AUX”.

To set the code to “REMOTE 2”

To set the code to “REMOTE 1”

1 Press and hold [RADIO, EXT-IN] on the

main unit and [1] on the remote control until
“REMOTE 1” is shown.

2 Press and hold [OK] and [1] for a minimum of

4 seconds.

1 Press and hold [RADIO, EXT-IN] on the

main unit and [2] on the remote control until
“REMOTE 2” is shown.

2 Press and hold [OK] and [2] for a minimum of

4 seconds.

12

Before requesting service, make the following checks. If you are in doubt about some of the check points,
or if the solutions indicated do not solve the problem, consult your dealer for instructions.

13

To clean this system, wipe with a soft, dry cloth.

• Never use alcohol, paint thinner or benzine to clean this system.

• Before using chemically treated cloth, read the instructions that came with the cloth carefully.

TROUBLESHOOTING GUIDE

■ Common problems

No operations can be done with the remote
control.

• Examine that the battery is installed correctly.

Sound is distorted or no sound.

• Increase the volume.

• Switch off the system, determine and correct the
cause, then switch the system on again. It can
be caused by straining of the speakers through
excessive volume or power, and when using the
system in a hot environment.

A “humming” sound can be heard during
playback.

• An AC mains lead or fluorescent light is near the
cables. Keep other appliances and cords away
from the cables of this system.

■ Discs

Display not shown correctly.
Playback does not start.

• You have not put in the disc correctly. Put it in
correctly.

• Disc is dirty. Clean the disc.

• Replace the disc if it is scratched, warped, or
non-standard.

• There is condensation. Let the system dry for 1 to
2 hours.

The total number of tracks shown is incorrect.
The disc cannot be read.
Distorted sound is heard.

• You put in a disc that the system cannot play.
Change to a playable disc.

• You put in a disc that has not been finalised.

■ Radio

A beat sound is heard.

• Switch off the TV or move it away from the
system.

■ DAB

DAB reception is poor

• Keep the antenna away from computers, TVs,
other cables and cords.

• Use an outdoor antenna.

■ iPod or iPhone

You cannot switch on the iPod or iPhone.

• Examine that the battery of the iPod or iPhone is
not depleted.

• Switch off the iPod or iPhone and the system
before you connect the iPod or iPhone. Connect
the iPod or iPhone and try again.

No sound.

• Switch off the iPod or iPhone and remove from
the system. Connect the iPod or iPhone to the
system and switch it on and play it again.

■ USB

The USB mass storage device or the contents
in it cannot be read.

• The format of the USB mass storage device or
the contents in it is/are not compatible with the
system.

• USB mass storage devices with storage capacity
of more than 32 GB cannot work in some
conditions.

Slow operation of the USB mass storage device.

• Large content size or large memory USB mass
storage device takes longer time to read.

The elapsed time shown is different from the
actual play time.

• Transfer the data to another USB mass storage
device or backup the data and reformat the USB
mass storage device.

MAINTENANCE

■ Main unit displays

“NO PLAY”

• Examine the content. You can only play supported
format.

• This system can read and play up to 255 albums
or folders (audio and non-audio).

“F76” or “F61”

• There is a power supply problem.

“ERROR”

• An incorrect operation was done. Read the
instructions and try again.

“NOT MP3/ERROR”

• An unsupported MP3 format. The system will skip
that track and play the next one.

“VBR–”

• The system cannot show the remaining play time
for variable bit rate (VBR) tracks.

“NODEVICE”

• The iPod or iPhone is not connected. Examine the
connection.

“DATA”

• Data broadcast being received over the DAB
broadcast signal, cannot be used on this system.

“SCRAMBLED”

• The broadcast station being received cannot be
accessed.

“NO SERVICE”

• The station is currently not broadcasting.

“NO SIGNAL”

• This station cannot be received. Check your
antenna.

“SCAN FAILED”

• Stations are not receivable. Check your antenna
and try Auto scanning.

“STATION FULL”

• DAB station memory is full. Use the following
method to clear station memory.

Press [RADIO MENU].

➀

Press [Y, U] to select “STATION CLEAR”.

➁

Press [OK]. “OK? Push OK” is shown.

➂

Press [OK].

➃

Station memory is clear and the system
automatically begins Auto scanning.

Memory reset (Initialisation)

When the following situations occur, refer to the
instructions below to reset the memory:

• There is no response when buttons are
pressed.

• You want to clear and reset the memory
contents.

To reset the memory

1 Disconnect the AC mains lead.

(Wait 3 minutes before you continue with
step 2.)

2 While you press and hold [

unit, connect the AC mains lead again.

“– – – – – – – –” shows on the display panel.

3 Release [

All the settings are set back to the factory
preset.
It is necessary to set the memory items again.

1

].

] on the main

1