Panasonic PISM5V Specsheet
POSM5V / PISM5V
Surface-Mount Dome Enclosures
• Easy camera installation. Supports the WV-NS202A, WV-NF302, WV-NF284, WV-CF294, WV-SC385, WV-CF Series,
WV-SF Series and BBHCM403/580/581
• Compact, vandal-resistant, high-impact polycarbonate construction
• Rugged IP66 rating for camera protection
• Versatile mounting options: choose surface, pendant or wall mount
• .875” (for ½” or 16mm conduit) side knock-out conduit opening
• High efciency, thermostatically controlled H&B with separate power inputs for H&B and camera on outdoor models
• Optically transparent, UV-stabilized, thermoplastic polycarbonate capsule. Available in clear or smoked
Panasonic System Networks Company of America Surveillance, Monitoring and Video Imaging
Bid Specifications
The outdoor dome camera housing shall be a Panasonic Model POSM5V or equivalent. The indoor model shall be a Panasonic Model PISM5V or equivalent. The housing shall
be designed to fully support the WV-NS202A, WV-NS302, WV-NF284, WV-CF294, WV-SC385, WV-CF Series, WV-SF Series and the BB-HCM403/580/581 camera models. The
Panasonic Model POSM5V shall also be equipped with 24VAC input blower and thermostatically controlled heater. The PISM5V does not include any electronics, and 12VDC or POE
camera power must be supplied to the housing. The upper dome housing shall be manufactured from a high-impact engineered thermoplastic polycarbonate with a UL flame rating
of 94-V0. The dome shall be made of an injection molded, optically clear thermoplastic polycarbonate. The dome shall be held in place with a minimum of three (3) fasteners and a
safety cable shall be provided to hold the dome while servicing. Access to the enclosure shall be from below with three (3) captive fasteners used to press the dome against a sealing
O-ring. The wiring enters through the top of the housing or through a .875” (for ½” conduit) opening on the side of the housing. The engineered thermoplastic top, with its reflective
white paint, insulates internal equipment. On the Panasonic POSM5V models the integrated heater/blower shall be a progressive power model and shall draw 40W maximum power.
The heater shall turn on at 60°F (15°C) and turn off at 80°F (27°C). The housing shall support a temperature range of -40°F (-40°C) to 122°F (50°C).
Specifications
ELECTRICAL SPECIFICATIONS FOR: POSM5V
Heater and Blower 40 watts max., (slow blow fuse recommended for power supply)
Camera 12 watts- 12VDC, POE
MECHANICAL SPECIFICATIONS
Size (WxH) 8.5” x 8.25” (216 x 209.6mm)
Weight 2.3 Lbs (1.043 Kg)
Construction: Upper Housing Polycarbonate, 94VO flame rated, and UV protected
Lower Dome Optically clear, thermoplastic polycarbonate
Mounting Options Surface, pendant and optional wall mount available
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature -40°F (-40°C) to 122°F (50°C)
Heater/Blower activates at 60°F (15°C), deactivates at 80°F (27°C)
MODELS
POSM5V Outdoor surface mount, 12VAC input, H&B
PISM5V Indoor surface mount with no electronics
SHIPPING
Dimensions 9” x 9” x 11.375” (230 x 230 x 289mm) 5 Lbs. (2.3 Kg)
Certifications/Ratings
Options/Accessories
PWMSM5V 1” NPT gooseneck wall mount
PMSM5V Pendant shroud/sunshield (must be used with
the PWM20G, PRM30G or PPRM30G)
panasonic.com/business/security/home.asp
Panasonic System Networks Company of America Surveillance, Monitoring and Video Imaging
Panasonic Service Center
415 Horizon Drive
Suite 350-B
Suwanee, GA 30024
(770) 904-8350
Design and specifications subject
to change without notice.
06082011
Loading...