TGA659(e).fm Page 1 Monday, November 22, 2010 3:12 PM
Installation Manual
Additional Digital Cordless Handset
Model No. KX-TGA659
Thank you for purchasing a Panasonic product.
This unit is an additional handset compatible with the following
series of Panasonic Digital Cordless Phone:
KX-TG4131/KX-TG6591/KX-TG6631/KX-TG6641
You must register this handset with your base unit before it can
be used. This installation manual describes only the steps
needed to register and begin using the handset. Please read
the base unit’s operating instructions for further details.
Charge the batteries for about 7 hours before initial use.
Please read this installation manual before using the unit and
save it for future reference.
For assistance, visit our Web site:
http://www.panasonic.com/help
for customers in the U.S.A. or
Puerto Rico.
Printed in China
PNQX3177ZA TT1110KA0 (A)
TGA659(e).fm Page 2 Monday, November 22, 2010 3:12 PM
Accessory information
Supplied accessories
Accessory item/Order numberQuantity
Charger/PNLC1015ZT1
AC adaptor/PQLV219Y1
Rechargeable batteries/HHR-4DPA2
*1
Handset cover
Belt clip/PNKE1076Z11
*1 The handset cover comes attached to the handset.
Note:
LPlease read the base unit’s operating instructions for additional/
TGA659(e).fm Page 3 Monday, November 22, 2010 3:12 PM
Setting up
Connections/Wall mounting
25.4 mm
(1 inch)
Screws
(Not supplied)
Note:
LUse only the supplied Panasonic AC adaptor PQLV219.
LThe AC adaptor must remain connected at all times. (It is normal for
the adaptor to feel warm during use.)
LMake sure that the wall and the fixing method are strong enough to
support the weight of the unit.
For assistance, please visit http://www.panasonic.com/help3
(120 V AC, 60 Hz)
Hooks
TGA659(e).fm Page 4 Monday, November 22, 2010 3:12 PM
Battery installation/Battery charging
Important:
LUse the supplied rechargeable batteries. For replacement, we
recommend using the Panasonic rechargeable batteries noted on
page 2.
LWipe the battery ends (S, T) with a dry cloth.
LAvoid touching the battery ends (S, T) or the unit contacts.
LConfirm correct polarities (S, T).
LUSE ONLY Ni-MH batteries AAA (R03) size.
LDo NOT use Alkaline/Manganese/Ni-Cd batteries.
Charge for about 7 hours.
LWhen the batteries are fully charged, the charge indicator goes off and
“Fully charged” is displayed.
Rechargeable
Ni-MH ONLY
Note:
LIf the batteries are fully charged, but the operating time seems to be
shorter, clean the battery ends (S, T) and the charge contacts with a
dry cloth and charge again.