Panasonic KX-TG7103E, KX-TG7102E, KX-TG7100E User Manual

TG7100_7120E(e)_QG.fm Page 1 Wednesday, July 5, 2006 10:18 AM

Model No. KX-TG7100E/KX-TG7102E

Model No. KX-TG7120E/KX-TG7122E

Quick Guide

1 Connections

Base unit

Digital Cordless Phone

KX-TG7103E

Digital Cordless Answering System

KX-TG7123E

Hook

Use only the included AC adaptor
and telephone line cord.

Charger (KX-TG7102, KX-TG7103, KX-TG7122, and KX-TG7123 only)

Hooks

(220–240 V, 50 Hz)

Use only the included AC adaptor.

(220–240 V, 50 Hz)

To telephone network

PQQW15103YA DC0206DS2076

TG7100_7120E(e)_QG.fm Page 2 Wednesday, July 5, 2006 10:18 AM

2 Battery installation/

Battery charge (Initial charge: 7 hours)

Base unit *1

*1 The pictured model is KX-TG7100.
*2 KX-TG7102, KX-TG7103,

KX-TG7122, and KX-TG7123 only

Note:

L Use only the included rechargeable batteries.

Charger *2

Charge
contact

3 Symbols used in these operating instructions

Symbol Meaning

{j/OK} Press {j/OK}.

i Proceed to the next operation.

“” Select the words in quotations shown on the display (e.g., “Handset

Setup”) by pressing {^} or {V}.

Date and time

1

{j/OK}

2 Press {^} or {V} to select “Handset Setup”. i {>} 3 KX-TG7100/KX-TG7102/KX-TG7103

Press {^} or {V} to select “Set Date & Time”. i {>}
KX-TG7120/KX-TG7122/KX-TG7123

Press {^} or {V} to select “Time Settings”. i {>} i Press {^} or {V} to select “Set
Date & Time”. i {>}

4 Enter the current day, month, and year. 5 Enter the current hour and minute. 6 {j/OK} i {ih}

– 2 –

TG7100_7120E(e)_QG.fm Page 3 Wednesday, July 5, 2006 10:18 AM

4 Basic operations

Feature Operation

Making a call Dial the phone number. i {C}/{s}

Answering a call {C}

Hanging up {ih}

Receiver/speaker volume Press {^} or {V} while on a call.

Last number redial {R} i {C}

Making a call with redial list {R} i Press {^} or {V} to select the desired

number. i {C}

Handset phonebook: storing an
entry (name and phone
numbers)

Handset phonebook: making a
call

Handset ringer volume {j/OK} i “Handset Setup” i {>} i

Changing ringtone
(outside calls)

Answering system (KX-TG7120, KX-TG7122, and KX-TG7123 only)

{k} i {j/OK} i “New Entry” i {>} i
Enter the party’s name (16 characters max.). i
{j/OK} i Enter the party’s phone number (24 digits
max.). i {j/OK} i “Save” i {>} i {ih}

L To enter a name, see the character table in the

operating instructions.

{k} i Press {^} or {V} to display the desired entry.
i {C}

“Ringer Setup” i {>} i “Ringer Volume”
i {>} i Press {^} or {V} to select the desired

volume. i {>} i {ih}
{j/OK} i “Handset Setup” i {>} i

“Ringer Setup” i {>} i “Ext. Ringtone”
i {>} i Select the desired ringtone. i {>} i

{ih}

Feature Operation
Answering on/off {j/OK} i “Answer System” i {>} i

“Answer On” or “Answer Off” i {>} i {ih}

Listening to messages {j/OK} i “Answer System” i {>} i “Play

New Msg.” or “Play All Msg.” i {>}

– 3 –

TG7100_7120E(e)_QG.fm Page 4 Wednesday, July 5, 2006 10:18 AM

5 Frequently asked questions

Question Cause & solution

What kind of power outlet
should I connect the AC
adaptor to?

Why is w flashing? L The handset is too far from the base unit. Move closer.

Connect the AC adaptor to a 220–240 V outlet.

L The AC adaptor is not connected. Check the

connections.

L You are using the handset or base unit in an area with

high electrical interference. Place the handset and base
unit away from interference sources, such as antennas
and mobile phones.

L The handset is not registered to the base unit. Register it.
{j/OK} i “Handset Setup” i {>} i
“Registration” i {>} i “Register H.set” i
{>} i Press and hold {x} on the base unit for about 3

seconds, until the registration tone sounds. i Wait until
“Enter Base PIN” is displayed. i Enter the base unit
PIN (default: “0000”). i {j/OK}

Why is the handset display
blank?

What should I do when the
handset does not turn on?

How long should I charge new
batteries?

How long is the battery
operating time?

Can I keep the handset on the
base unit or charger when I
am not using it?

The handset is not turned on. To turn the power on, press

{ih} for about 1 second.

L Make sure that the batteries are installed correctly.
L Fully charge the batteries.
L Clean the charge contacts and charge again.

Charge the batteries for about 7 hours.

When you are using fully-charged Ni-MH batteries
(included batteries)
In continuous use: 17 hours max.
In continuous standby mode: 180 hours max.

L It is normal for batteries not to reach full capacity at the

initial charge. Maximum battery performance is reached
after a few complete cycles of charge/discharge (use).

L Actual battery performance depends on a combination of

how often the handset is in use and how often it is not in
use (standby).

L Even after the handset is fully charged, the handset can

be left on the base unit or charger without any ill effect on
the batteries.

;

– 4 –

TG7100_7120E(e)_QG.fm Page 5 Wednesday, July 5, 2006 10:18 AM

Question Cause & solution

When should I replace the
batteries?

If the batteries are fully charged until 1 is displayed, but

3

is displayed after a few calls, replace the batteries with

new ones.

What is a PIN? The PIN is a 4-digit number that must be entered in order

to change certain base unit settings. The default PIN is
“0000”.

What do I need to do to
display caller information?

L You need to subscribe to Caller ID service. Consult your

service provider/telephone company for details.

L The message “You must first subscribe to

Caller ID.” will be displayed until you receive caller

information after subscribing to Caller ID service.

6 Optional service (Caller ID)

If you subscribe to Caller ID service, you can:

Tom

012345

– display caller information

7 Sales and support information

Customer Care Centre

L For customers within the UK: 08700 100 076
L For customers within the Republic of Ireland: 01289 8333
L Visit our website for product information: www.panasonic.co.uk
L E-mail: [e-mail]

Direct Sales at Panasonic UK

L Order accessory and consumable items for your product with ease and confidence by

phoning our Customer Care Centre Monday - Thursday 9:00am - 5:30pm, Friday 9:30am

- 5:30pm (Excluding public holidays).

L

Or go on line through our Internet Accessory ordering application at

L

Most major credit and debit cards accepted.

L

All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd.

L

It couldn t be simpler!

L

Also available through our Internet is direct shopping for a wide range of finished products,

www.panasonic.co.uk

take a browse on our website for further details.

.

Customer Care Helpline Tel. No.: U.K. 08700 100 076 / R.O.I. 01289 8333

– 5 –

TG7100_7120E(e)_QG.fm Page 6 Wednesday, July 5, 2006 10:18 AM

IMPORTANT

08700 100 076 (UK)

the Panasonic DECT Helpline

If you have problems setting up or

operating this product please call

01289 8333 (Repl of Ireland)