Panasonic KX-TG2631NZ, KX-TG2632NZ User Manual
Operating Instructions
2.4 GHz Digital Cordless
Answering System
Model No.
Answering System with Two Handsets
Model No.
Model shown is KX-TG2631NZ.
This unit is compatible with Caller ID. To use this feature, you must subscribe to
the appropriate service offered by your service provider.
Charge the handset battery for 6 hours before initial use.
Please read these Operating Instructions before using the unit and save for
future reference.
KX-TG2631NZ
2.4 GHz Digital Cordless
KX-TG2632NZ
Table of Contents
Introduction
Introduction. . . . . . . . . . . . . . . . . . . . . . . 3
About these operating instructions . . . . . 4
Accessory information . . . . . . . . . . . . . . 5
Important safety instructions . . . . . . . . . 6
For best performance . . . . . . . . . . . . . . . 9
Preparation
Setting up the base unit . . . . . . . . . . . . 10
Setting up the handset . . . . . . . . . . . . . 11
Controls . . . . . . . . . . . . . . . . . . . . . . . . 14
Displays . . . . . . . . . . . . . . . . . . . . . . . . 16
Setting the unit before use . . . . . . . . . . 17
Making/Answering Calls
Making calls . . . . . . . . . . . . . . . . . . . . . 18
Answering calls . . . . . . . . . . . . . . . . . . 19
Useful features . . . . . . . . . . . . . . . . . . . 19
Phonebook
Handset phonebook . . . . . . . . . . . . . . . 22
Copying handset phonebook items . . . 24
Caller ID Service
Using Caller ID service. . . . . . . . . . . . . 25
Caller list. . . . . . . . . . . . . . . . . . . . . . . . 26
Transferring calls between handsets,
conference calls . . . . . . . . . . . . . . . . . . 39
Registering a handset. . . . . . . . . . . . . . 40
Useful Information
Wall mounting. . . . . . . . . . . . . . . . . . . . 42
Headset (optional) . . . . . . . . . . . . . . . . 43
Error messages . . . . . . . . . . . . . . . . . . 44
Troubleshooting . . . . . . . . . . . . . . . . . . 46
Specifications . . . . . . . . . . . . . . . . . . . . 50
Index
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Programming
Programmable settings . . . . . . . . . . . . 28
Answering System
Answering system . . . . . . . . . . . . . . . . 32
Listening to messages using the base
unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Listening to messages using the
handset. . . . . . . . . . . . . . . . . . . . . . . . . 34
Remote operation. . . . . . . . . . . . . . . . . 35
Answering system settings. . . . . . . . . . 36
Multi-unit Operation
Intercom . . . . . . . . . . . . . . . . . . . . . . . . 38
2
Introduction
Introduction
Thank you for purchasing a Panasonic cordless telephone.
We recommend keeping a record of the following information for future reference.
Serial No. Date of purchase
(found on the bottom of the base unit)
Name and address of dealer
Attach your purchase receipt here.
3
Introduction
About these operating instructions
These operating instructions can be used for KX-TG2631/KX-TG2632.
Descriptions of the multiple handsets and charger
KX-TG2632 includes 2 handsets and a charger. Descriptions of the multiple handsets and
charger in these operating instructions are for KX-TG2632 only.
KX-TG2632
Symbols used in these operating instructions
Symbol Meaning
Example: “Ringer volume”Press {^} or {V} to select the words in quotations
shown on the display.
i Proceed to the next operation.
Example: {MENU},
{Phonebook}
Example:
{MENU} i {0}{5}{2}
Select the desired setting. i
{
Save} i {OFF}
The words in the brackets show button names
including soft key names (page 16) on the handset
and base unit.
Press {MENU}, then press {0}, {5}, {2}. Press {^}
or {V} to select the desired setting. Press
{
then press
OFF}.
{
Save},
4
Introduction
Accessory information
Included accessories
1234
5
No. Accessory item
1 AC adaptor 1 2
2 Telephone line cord 1 1
3 Battery 1 2
4 Handset cover
5 Charger – 1
*1 The handset cover comes attached to the handset.
*1
Quantity
KX-TG2631 KX-TG2632
12
Additional/replacement accessories
Accessory item Order number
Rechargeable nickel metal
hydride (Ni-MH) battery
Belt clip PQKE10393Z6
HHR-P105
5
Introduction
Important safety
instructions
When using the product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, or
personal injury.
1. Read all instructions carefully.
2. Follow all warnings and instructions
marked on the product.
3. Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners. Use a moist cloth for
cleaning.
4. Do not use the product near water, for
example near a bathtub, wash bowl,
kitchen sink, etc.
5. Place the product securely on a stable
surface. Serious damage and/or injury
may result if the product falls.
6. Do not cover slots and openings on the
product. They are provided for
ventilation and protection against
overheating. Never place the product
near radiators, or in a place where
proper ventilation is not provided.
7. Use only the power source marked on
the product. If you are not sure of the
type of power supplied to your home,
consult your dealer or local power
company.
8. Do not place objects on the power
cord. Install the product where no one
can step or trip on the cord.
9. Do not overload power outlets and
extension cords. This can result in the
risk of fire or electric shock.
10. Never push any objects through slots
in the product. This may result in the
risk of fire or electric shock. Never spill
any liquid on the product.
11. To reduce the risk of electric shock, do
not disassemble the product. Take the
product to an authorised service centre
when service is required. Opening or
removing covers may expose you to
dangerous voltages or other risks.
Incorrect reassembly can cause
electric shock when the product is
subsequently used.
12. Unplug the product from power outlets
and take to an authorised service
centre when the following conditions
occur:
A. When the power cord is damaged
or frayed.
B. If liquid has been spilled into the
product.
C. If the product has been exposed to
rain or water.
D. If the product does not work
normally by following the operating
instructions. Adjust only controls
covered by the operating
instructions. Improper adjustment
may require extensive work by an
authorised service centre.
E. If the product has been dropped or
physically damaged.
F. If the product exhibits a distinct
change in performance.
13. During thunderstorms, avoid using
telephones except cordless types.
There may be a remote risk of an
electric shock from lightning.
14. Do not use the product to report a gas
leak, when in the vicinity of the leak.
SAVE THESE
INSTRUCTIONS
6
Introduction
CAUTION:
Installation
L Never install telephone wiring during a
lightning storm.
L Never install telephone jacks in wet
locations unless the jack is specifically
designed for wet locations.
L Never touch uninsulated telephone
wires or terminals unless the telephone
line has been disconnected at the
network interface.
L Use caution when installing or modifying
telephone lines.
L Do not touch the plug with wet hands.
L The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
Battery
To reduce the risk of fire or injury to
persons, read and follow these
instructions.
L Use only the battery(ies) specified.
L Do not dispose of the battery(ies) in a
fire. They may explode. Check with local
waste management codes for special
disposal instructions.
L Do not open or mutilate the battery(ies).
Released electrolyte is corrosive and
may cause burns or injury to the eyes or
skin. The electrolyte may be toxic if
swallowed.
L Exercise care when handling the
battery(ies). Do not allow conductive
materials such as rings, bracelets or
keys to touch the battery(ies), otherwise
a short circuit may cause the battery(ies)
and/or the conductive material to
overheat and cause burns.
L Charge the battery(ies) provided, or
identified for use with the product only, in
accordance with the instructions and
limitations specified in this manual.
WARNING:
L To prevent the risk of fire or electrical
shock, do not expose the product to rain
or any type of moisture.
L Unplug the product from power outlets if
it emits smoke, an abnormal smell, or
makes an unusual noise. These
conditions can cause fire or electric
shock. Confirm that smoke has stopped
emitting and contact an authorised
service centre.
Medical
L Consult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. (The product
operates in the frequency range of 2.4
GHz to 2.48 GHz, and the power output
is 100 mW (max.).) Do not use the
product in health care facilities if any
regulations posted in the area instruct
you not to do so. Hospitals or health care
facilities may be using equipment that
could be sensitive to external RF energy.
General warnings
L This equipment will be inoperable when
mains power fails.
L When a failure occurs which results in
the internal parts becoming accessible,
disconnect the power supply cord
7
Introduction
immediately and return the product to an
authorised service centre.
L Disconnect the telecom connection
before disconnecting the power
connection prior to relocating the
equipment, and reconnect the power
first.
L No “111” or other calls can be made from
this device during a mains power failure.
This equipment shall not be set to make
automatic calls to the Telecom “111”
Emergency Service.
L To minimise the possibility of lightning
damage, when you know that a
thunderstorm is coming, we recommend
that you:
– Unplug the telephone line cord from
the phone jack.
– Unplug the power supply cord from
the AC power outlet.
L The earpiece on the handset is
magnetised and may retain small
metallic objects.
L This equipment has been tested and
found to comply with AS/NZS 3548:
1995 limits for electromagnetic
interference. Any modifications to any
part of the system or to any peripherals
may void the EMC compliance of the
system or the peripherals.
L The product’s answering system only
responds to Distinctive Alert cadence(s)
DA1 and DA3.
L Not all telephones will respond to
incoming ringing when connected to the
extension socket.
L This equipment may not provide for the
effective hand-over of a call to another
device connected to the same line.
Important notice
L Under power failure conditions, this
telephone may not operate. Please
ensure that a separate telephone, not
dependent on local power, is available
for emergency use.
8
For best performance
Base unit location/avoiding noise
The base unit and other compatible
Panasonic units use radio waves to
communicate with each other.
For maximum distance and noise-free
operation, we recommend the following:
L Placing the product away from electrical
appliances.
L Placing the base unit in a HIGH and
CENTRAL location with no obstructions
such as walls.
L Raising the antenna vertically.
L If you use the handset near a microwave
oven which is being used, noise may be
heard. Move away from the microwave
oven and closer to the base unit.
L If you use the handset near another
cordless phone’s base unit, noise may
be heard. Move away from the other
cordless phone’s base unit and closer to
your base unit.
Introduction
L The product should be kept away from
heat sources such as heaters, kitchen
stoves, etc. It should not be placed in
rooms where the temperature is less
than 5 °C or greater than 40 °C. Damp
basements should also be avoided.
L The maximum calling distance may be
shortened when the product is used in
the following places: Near obstacles
such as hills, tunnels, underground, near
metal objects such as wire fences, etc.
L Operating near 2.4 GHz electrical
appliances may cause interference.
Move away from the electrical
appliances.
Routine care
L Wipe the outer surface of the product
with a soft moist cloth. Do not use
benzine, thinner, or any abrasive
powder.
Environment
L Keep the product away from electrical
noise generating devices, such as
fluorescent lamps and motors.
L The product should be kept free from
excessive smoke, dust, high
temperature, and vibration.
L The product should not be exposed to
direct sunlight.
L Do not place heavy objects on top of the
product.
L When you leave the product unused for
a long period of time, unplug the product
from the power outlet.
9
Preparation
Hook
Setting up the base unit
Connecting the AC adaptor and
telephone line cord
Connect the telephone line cord until it
clicks into the base unit (A) and telephone
line jack (B). Connect the AC adaptor cord
by pressing the plug firmly (C).
L Use only the included Panasonic AC
adaptor PQLV19AL.
C
Note:
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor
to feel warm during use.)
L The AC adaptor should be connected to
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
L The unit will not work during a power
failure. We recommend connecting a
standard telephone to the same
telephone line or to the same telephone
jack using a BT double adaptor.
L The unit is not designed to be used with
rotary (pulse dialling) services.
L The unit’s answering system will not
answer incoming calls on your FaxAbility
number.
(220-240 V AC,
50/60 Hz)
To single-line
telephone jack
10
A
B
Preparation
If you subscribe to an ADSL service
Please attach a noise filter (contact your
ADSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 25) do not
function properly.
To single-line
telephone
jack
Noise filter
Setting up the handset
Connecting the charger
Available model(s):
KX-TG2632
L Use only the included Panasonic AC
adaptor PQLV19AL.
(220-240 V AC,
50/60 Hz)
Bottom of the charger
Hooks
Fasten the AC adaptor cord to prevent
it from being disconnected.
11
Preparation
Battery installation/replacement
1 Press the notch of the handset cover
firmly, and slide it in the direction of the
arrow.
L If necessary, remove the old battery.
2 Insert the battery (A), and press it
down until it snaps into position (B).
Then close the handset cover.
B
A
Base unit:
L Model shown is KX-TG2631.
Charger:
Available model(s):
KX-TG2632
Important:
L Use only the rechargeable Panasonic
battery noted on page 5.
Battery charge
Place the handset on the base unit or
charger for 6 hours before initial use.
While charging, “Charging” is displayed
and the CHARGE indicator on the base
unit lights. When the battery is fully
charged, “Charge completed” is
displayed.
12
Charge contacts
Note:
L If you want to use the unit immediately,
charge the battery for at least 15
minutes.
L To ensure that the battery charges
properly, clean the charge contacts of
the handset, base unit, and charger with
a soft, dry cloth once a month. Clean
more often if the unit is subject to the
Preparation
exposure of grease, dust, or high
humidity.
Battery level
Battery icon Battery level
5 Fully charged
6 Medium
7 Low
Flashing: needs to be
recharged.
8 Empty
Note:
L When the battery needs to be charged,
the handset beeps intermittently while it
is in use.
Panasonic battery performance
Operation Operating time
While in use
(talking)
While not in use
(standby)
While using the
clarity booster
feature (page
20)
Up to 5 hours
Up to 11 days
Up to 3 hours
handset off the base unit or charger, the
less time you may actually talk using the
handset.
L After the handset is fully charged,
displaying “Charge completed”, it
may be left on the base unit (or charger)
without any ill effect on the battery.
L The battery level may not be displayed
correctly after you replace the battery. In
this case, place the handset on the base
unit (or charger) and let charge for 6
hours.
Note:
L Battery operating time may be
shortened over time depending on
usage conditions and surrounding
temperature.
L Battery power is consumed whenever
the handset is off the base unit or
charger, even when the handset is not in
use. Hence the longer you leave the
13
Preparation
GREE TING
MESSAGE
STOP
ERASE
CHECK
REC
REPEAT
SKIP
CHARGE
M
IC
G
R
E
E
TI
N
G
ME
S
S
A
G
E
S
TO
P
ER
A
S
E
CHECK
R
E
C
V
O
L
.
R
E
P
E
A
T
S
K
I
P
LO
C
AT
O
R
/
IN
T
ERC
O
M
CHA
RG
E
TOR
OM
TOR
OM
Controls
Base unit
A
M
B
GREETING
REC
ERA
SE
CHARGE
REPE
VOL.
LO
IN
MIC
NO
ANSWER ON
CHECK
STOP
MESSAGE
AT
SKIP
C
A
T
O
R
/
TE
R
C
O
M
A Antenna
B Speaker
C Display
D {GREETING REC} (Recording)
E {ERASE}
F {STOP}
G CHARGE indicator
H {GREETING CHECK}
I {ANSWER ON}
ANSWER ON indicator
*1 KX-TG2631
*2 KX-TG2632
C
H
D
E
F
G
REC
ERASE
CHARGE
CHECK
STOP
REPEAT
ANSWER ON
MESSAGE
SKIP
I
J
K
GREETING
L
LOLOCATOR
ININTERERCOM
LOLOCATOR
ININTERERCOM
QPR
J {MESSAGE}
MESSAGE indicator
K {>} (SKIP)
L {<} (REPEAT)
M Charge contacts
N VOL. (Volume) {<} {>}
O MIC (Microphone)
P {LOCATOR/INTERCOM}
*1
Q {1} (LOCATOR/INTERCOM)
R {2} (LOCATOR/INTERCOM)
*2
*2
14
Preparation
Handset
A
B
C
D
E
F
G
A Speaker
B Soft keys
C Headset jack
D {C} (TALK)
E Navigator key ({^} {V} {<} {>})
F {s} (SP-PHONE)
G {PAUSE} {REDIAL}
H Ringer indicator
Message indicator
I Receiver
J Display
K {MENU}
L {OFF}
M {MUTE} {CLEAR}
N {HOLD} {INTERCOM}
H
I
J
K
B
L
M
N
O
P
O Microphone
P Charge contacts
Note:
L Some operations not mentioned above
are displayed as soft key selections
during operation (page 16).
Example: {Recall}
Using the navigator key
The handset navigator key can be used to
navigate through menus and to select
items shown on the display, by pressing
{^}, {V}, {<}, or {>}.
Adjusting audio volume
Press {^} or {V} repeatedly while talking.
{^}
{<}
{>}
{V}
15
Preparation
Handset soft keys
The handset features 2 soft keys. By
pressing a soft key, you can select the
feature shown directly above it on the
display.
{Select}, {Save}, {OK}, {Recall} and
additional other functions are assigned to
soft keys, pay attention to soft keys to find
functions you need during handset
operation.
Rcvd Phone
K
calls book
L
Note:
L In these operating instructions, soft key
names are written inside brackets, the
same way as other unit keys.
Example:
Unit keys: {C}, {OFF}, etc.
Soft keys: {Rcvd calls}, {Phonebook},
{Recall}, etc.
Displays
Base unit display items
Displayed
item
E Flashes when message
E Flashes when the date and
C Base unit is on an intercom
B
C
E Greeting message
9@ Answering system is in
H1 Handset number; displayed
Meaning
memory is full.
time need to be set.
call, or handset is using the
answering system.
When flashing: base unit is
paging or is being paged.
The line is in use.
When flashing: the call is
put on hold or the
answering system is
answering a call.
When flashing rapidly: a
call is being received.
recording error
greeting only mode (caller
messages are not
recorded).
when paging, being paged
or registering.
*1
16
*1 KX-TG2632
Loading...