Panasonic KX-MB1500, KX-MB1520, KX-MB1530 Operating Instructions

Important Information Guide

Multi-Function Printer

Model No. KX-MB1500BL KX-MB1520BL KX-MB1530BL

KX-MB1500FR KX-MB1500G KX-MB1500GX
KX-MB1500SL KX-MB1520FR KX-MB1520G
KX-MB1520JT KX-MB1520NL KX-MB1520SL
KX-MB1520SP KX-MB1530FR KX-MB1530G
KX-MB1530JT KX-MB1530NL KX-MB1530SL
KX-MB1530SP

n Replacement accessory

FOR ENGLISH USERS:
You can select English for the display and
report (feature #110).

To ensure that the unit operates properly, we
recommend the use of Panasonic toner cartridge.
– Toner cartridge

R Model No. (Part No.): KX-FAT390X

– Toner cartridge (high capacity)

R Model No. (Part No.): KX-FAT410X

n The supplied Setup CD-ROM provides the
Operating Instructions in PDF format with a detailed
description on how to use the unit. Adobe
Reader® is required to view them. Please read
before using the unit and save the CD-ROM for
future reference.
R Save the original carton and packing materials

for future shipping and transportation of the unit.

R After unpacking the product, take care of the

packing materials and/or power plug cap
appropriately.

R The suffix in the model number will be omitted in

these instructions.

Language selection:

You can select the desired language.

The display and reports will be in the selected
language. If you want to change the setting, see the
operating instructions (feature #110).

®

Caution:
R When you operate this product, the power

outlet should be near the product and easily
accessible.

R Be sure to use the telephone line cord supplied

with this unit (KX-MB1520/KX-MB1530 only).

R Do not extend the telephone line cord

(KX-MB1520/KX-MB1530 only).

R Do NOT connect the unit to a computer with

the USB cable until prompted to do so during
the setup of Multi-Function Station (CD-ROM).

Trademarks:

R Adobe and Reader are either registered

trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other
countries.

R All other trademarks identified herein are the

property of their respective owners.

Location selection:

KX-MB1520SP/KX-MB1530SP only:
R Designed to be used in Spain and Portugal

according to the location setting feature.

The default setting is Spain. To change the
location setting, see the operating instructions
(feature #114).

Table of Contents

1.1 For your safety 3

1.2 Important safety instructions 4

1.3 Information for Users on Collection and
Disposal of Old Equipment and used
Batteries

1.4 Illegal copies 4

1.5 Useful Information 5

1.6 Declaration of Conformity
(KX-MB1520/KX-MB1530 only)

Caution:
R The maximum sound pressure level is 70 dB (A)

or less as per EN ISO 7779. (Germany only)

R This device is not intended for use in the direct

field of view at visual display workplaces. To
avoid incommoding reflexions at visual display
workplaces this device must not be placed in the
direct field of view. (Germany only)

R In the event of problems, you should contact your

equipment supplier in the first instance
(KX-MB1520/KX-MB1530 only).

KX-MB1520BL/KX-MB1530BL

R This equipment is designed for use on the Belgium

analogue telephone network.

KX-MB1520FR/KX-MB1530FR

R This equipment is designed for use on the France

analogue telephone network.

KX-MB1520G/KX-MB1530G

R This equipment is designed for use on the Germany

and Austria analogue telephone network.

KX-MB1520JT/KX-MB1530JT

R This equipment is designed for use on the Italy

analogue telephone network.

KX-MB1520NL/KX-MB1530NL

R This equipment is designed for use on the

Netherlands analogue telephone network.

KX-MB1520SL/KX-MB1530SL

R This equipment is designed for use on the

Switzerland analogue telephone network.

KX-MB1520SP/KX-MB1530SP

R This equipment is designed for use on the Spain and

Portugal analogue telephone network.

4

6

Declaration of Conformity (KX-MB1520/KX-MB1530
only):

R Panasonic System Networks Co., Ltd. declares that

this equipment is in compliance with the essential
requirements and other relevant provisions of Radio
& Telecommunications Terminal Equipment
(R&TTE) Directive 1999/5/EC.
Declarations of Conformity for the relevant
Panasonic products described in this manual are
available for download by visiting:
http://www.doc.panasonic.de

Contact to Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany

Information of Compliance with EU relevant
Regulatory Directives (KX-MB1500 only):

R Contact to Authorised Representative:

Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany

ENERGY STAR (European Union only):

R As an ENERGY STAR® Partner, Panasonic has

determined that this product meets the ENERGY
STAR guidelines for energy efficiency. ENERGY
STAR is a U.S. registered mark.

2

1.1 For your safety

To prevent severe injury and loss of life/property, read this section

1. . Important Information

carefully before using the unit to ensure proper and safe operation of
your unit.

1.1.1 WARNING

Power and ground connection

R Unplug this unit from power outlets if it emits smoke, an abnormal smell

or makes unusual noise. These conditions can cause fire or electric
shock. Confirm that smoke has stopped and contact an authorised
service centre.

R Use only the power source marked on the unit. If you are not sure of

the type of power supplied to your home, consult your retailer/dealer
or local power company.

R For safety purposes this unit is equipped with a grounded plug. If you

do not have this type of outlet, please have one installed. Do not ignore
this safety feature by tampering with the plug.

R Do not place objects on the power cord. Install the unit where no one

can step or trip on the cord.

R Do not overload power outlets and extension cords. This can result in

the risk of fire or electric shock.

R Completely insert the AC adaptor/power plug into the power outlet.

Failure to do so may cause electric shock and/or excessive heat
resulting in a fire.

R Regularly remove any dust, etc. from the AC adaptor/power plug by

pulling it from the power outlet, then wiping with a dry cloth. Accumulated
dust may cause an insulation defect from moisture, etc. resulting in a
fire.

R Never touch the plug with wet hands. There is a danger of electric shock.

Installation

R Place the unit securely on a stable, level surface. Serious damage and/

or injury may result if the unit falls.

R To prevent the risk of fire or electrical shock, do not expose this product

to rain or any type of moisture.

R Use this unit in a well ventilated area. Particularly, if you will be using

the unit for extended periods of time or will be printing in large volumes,
be sure to ventilate the room sufficiently.

Operating safeguards

R Turn the power OFF before cleaning. Do not use liquid or aerosol

cleaners.

R Do not cover slots and openings on the unit. They are provided for

ventilation and protection against overheating. Never place the unit
near radiators, or in a place where proper ventilation is not provided.

R Never push any objects through slots in this unit. This may result in the

risk of fire or electric shock. Never spill any liquid on the unit.

R To reduce the risk of electric shock, do not disassemble this unit. Take

the unit to an authorised service centre when service is required.
Opening or removing covers may expose you to dangerous voltage or
other risks. Incorrect reassembly can cause electric shock when the
unit is subsequently used.

R Follow all warnings and instructions marked on this unit.
R Do not spill liquids (detergents, cleansers, etc.) onto the telephone line

cord plug, or allow it to become wet at all. This may cause a fire. If the
telephone line cord plug becomes wet, immediately pull it from the
telephone wall jack, and do not use (KX-MB1520/KX-MB1530 only).

1. Important Information

R Unplug this unit from power outlets and refer servicing to an authorised

service centre when any of the following conditions occur:
– If the power cord is damaged or frayed.
– If the unit has been exposed to rain or water, or liquid has been

spilled into the unit. Do not use a microwave oven to speed up the
drying process of any parts of the unit to avoid permanent damage.

– If the unit does not work normally by following the operating

instructions. Adjust only controls covered by the operating
instructions. Improper adjustment may require extensive work by

an authorised service centre.
– If the unit has been dropped or physically damaged.
– If the unit exhibits a distinct change in performance.

USB cable

R To assure continued emission limit compliance, use only shielded USB

cable (Example: Hi-Speed USB 2.0 certified cable).

1.1.2 CAUTION

Installation and relocation

R After moving the unit from cold areas to warmer areas, wait

approximately 30 minutes before turning on the power switch to allow
the unit to adjust to the ambient temperature. If the power switch is
turned on too soon after a sudden climate change, condensation may
form inside the unit, causing malfunction.

R Never turn the unit upside down or sideways when moving it.
R Never install telephone wiring during a lightning storm (KX-MB1520/

KX-MB1530 only).

R Never install telephone jacks in wet locations unless the jack is

specifically designed for wet locations (KX-MB1520/KX-MB1530 only).

R Never touch uninsulated telephone wires or terminals unless the

telephone line has been disconnected at the network interface
(KX-MB1520/KX-MB1530 only).

R Use caution when installing or modifying telephone lines (KX-MB1520/

KX-MB1530 only).

R Do not position the unit in a location where it is unstable or subject to

vibrations.

Laser radiation

CLASS 1 LASER PRODUCT

R The printer of this unit utilises a laser. Use of controls or adjustments

or performance of procedures other than those specified herein may
result in hazardous radiation exposure.

See the operating instructions for the Laser diodes properties.

LED light

CLASS 1 LED PRODUCT

R When using the unit, do not look directly at the CIS’s LED light. Direct

eye exposure can cause eye damage.

See the operating instructions where the CIS LED specifications are
listed.

Fuser unit

R During or immediately after printing, the fuser unit gets hot. This is

normal. Do not touch the fuser unit.

Detailed operating instructions are on the CD-ROM.

3