Panasonic KX-HNS107 Installation Manual [es]
Installation Guide
Home Network System
Garage Door Sensor
Model No. KX-HNS107
Thank you for purchasing a Panasonic product.
This document explains how to install the sensor properly.
For details about how to use the system, refer to the User’s Guide
(page 16).
Please read this document before using the unit and save it for future
reference.
For assistance, please contact us at 1-800-272-7033 or visit our Web
site: http://shop.panasonic.com/support for customers in the U.S.A.
Please register your product: http://shop.panasonic.com/support
In order to use this device:
R Download the latest version of the [Home Network] app.
R Update your hub to the latest firmware version
(version 7.00 or later).
For more information, refer to the User’s Guide (page 16).
Printed in China
HNS107_(en_en)_1210_ver.031.pdf 1 2015/12/10 16:49:06
Introduction
Accessory information ...............3
Important Information
About this system ......................4
For your safety ...........................
4
Important safety instructions ......5
For best performance ................6
Other information .......................6
Setup
Part names and functions ..........8
LED indicator .............................8
Setup overview ..........................9
Inserting the battery ...................9
Registering the sensor .............10
Information about sensor
features ....................................11
Confirming the usage area ......12
Mounting the sensor ................13
Appendix
Features available when using the
[Home Network] app ................16
Accessing the User’s Guide ....16
Specifications ..........................17
FCC and other information ......18
Customer services ...................19
Limited Warranty (ONLY FOR
U.S.A.) .....................................20
2
Table of Contents
HNS107_(en_en)_1210_ver.031.pdf 2 2015/12/10 16:49:06
Accessory information
Supplied accessories
No. Accessory item/Part number Quantity
A
Battery
*
1
1
B
Mounting adaptor
*
2
/PNKL1062Z1
1
C Mounting screws (20 mm (25/32 inches))/XTS4+20AVWC3 2
D Double-sided mounting tapes/PNHS1724Z 2
*1 When replacing the battery, see “Power source” of “Specifications”, page 17
f
or battery information.
*2 The mounting adaptor is attached to the product at the time of shipment.
A
B C D
Other information
R D
esign and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product.
Trademarks
R iPhone and iPad are registered trademarks of Apple Inc.
R Android is a trademark of Google Inc.
R Microsoft, Windows, and Internet Explorer are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
R All other trademarks identified herein are the property of their respective owners.
For a
ssistance, please visit http://shop.panasonic.com/support
3
Introduction
HNS107_(en_en)_1210_ver.031.pdf 3 2015/12/10 16:49:07
About this system
R This system is an auxiliary system; it
is not designed to provide complete
protection from property loss.
Panasonic will not be held
responsible in the event that
property loss occurs while this
system is in operation.
R The system’s wireless features are
subject to interference, therefore
functionality in all situations cannot
be guaranteed. Panasonic will not
be held responsible for injury or
damage to property that occurs in
the event of wireless communication
error or failure.
For your safety
T
o prevent severe injury and loss of
property, read this section carefully
before using the product to ensure
proper and safe operation of your
product.
WARNING
Power connection
R D
o not connect non-specified
devices.
Installation
R I
nstall this product in accordance
with the provided instructions.
R To prevent the risk of fire or
electrical shock, do not expose the
product to rain or any type of
moisture.
R Do not place or use this product
near automatically controlled
devices such as fire alarms. Radio
w
aves emitted from this product may
cause such devices to malfunction
resulting in an accident.
R Install the product only on a vertical
surface. Do not install the product on
a ceiling, as the product may fall,
resulting in damage or injury.
R Keep small parts (screws, etc.) out
of the reach of children. There is a
risk of swallowing. In the event they
are swallowed, seek medical advice
immediately.
R Panasonic will not be held
responsible for damage or injury
caused by improper connection,
installation, or usage.
Operating safeguards
R D
o not disassemble the product.
Medical
R Consult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. DECT features
operate between 1.92 GHz and
1.93 GHz with a peak transmission
power of 115 mW.
R Do not use the product in health
care facilities if any regulations
posted in the area instruct you not to
do so. Hospitals or health care
facilities may be using equipment
that could be sensitive to external
RF energy.
CR Lithium battery
R D
o not recharge, disassemble,
remodel, heat or throw it into fire.
4
For a
ssistance, please visit http://shop.panasonic.com/support
Important Information
HNS107_(en_en)_1210_ver.031.pdf 4 2015/12/10 16:49:07
R D
o not touch the terminals
and
with metal objects.
R R
isk of explosion if battery is
replaced by an incorrect type.
Dispose of used battery according to
local regulations.
R If any electrolyte should come into
contact with your hands or clothes,
wash it off thoroughly with water.
R If any electrolyte should come into
contact with your eyes, never rub
your eyes. Rinse your eyes
thoroughly with water, and then
consult a doctor.
CAUTION
Installation and location
R D
o not mount the product on
plywood less than 25 mm (1 inch)
thick.
CR Lithium battery
R U
se only the battery noted on
page 3.
R Insert the battery correctly.
R Do not leave the battery in an
automobile exposed to direct
sunlight for a long period of time with
the doors and windows closed.
R Remove the battery if you do not
use the product for a long period of
time. Keep it in a cool, dark area.
R Do not replace a battery with wet
hands.
R Keep out of the reach of small
children. There is a risk of
swallowing. If the battery is
swallowed, seek medical attention
immediately.
R Remove the battery if it becomes
unusable. There is a risk of leakage,
overheating, and rupture. Do not
attempt to use a battery if it is
l
eaking.
R Exercise care when handling the
battery. Do not allow conductive
materials such as rings, bracelets, or
keys to touch the battery, otherwise
a short circuit may cause the battery
and/or the conductive material to
overheat and cause burns.
R Do not intentionally pour water on
the battery or allow it to get wet.
There is a risk of fire and smoke. If
the battery becomes wet, remove it
immediately and contact an
authorized service center.
R The battery should be used
correctly, otherwise the product may
be damaged due to battery leakage.
R Do not charge, short-circuit,
disassemble, or heat the battery.
R Do not dispose of batteries in a fire.
Important safety
i
nstructions
When using your product, basic safety
precautions should always be followed
to reduce the risk of fire, electric shock,
and injury to persons, including the
following:
1. Do not use this product near water
for example, near a bathtub,
washbowl, kitchen sink, or laundry
tub, in a wet basement or near a
swimming pool.
2. Use only the batteries indicated in
this document. Do not dispose of
batteries in a fire. They may
explode. Check with local codes for
possible special disposal
instructions.
SAVE THESE INSTRUCTIONS
For a
ssistance, please visit http://shop.panasonic.com/support
5
Important Information
HNS107_(en_en)_1210_ver.031.pdf 5 2015/12/10 16:49:07
For best performance
Hub location/avoiding noise
T
he hub and other compatible
Panasonic devices use radio waves to
communicate with each other.
R For maximum coverage and
noise-free communications, place
your hub:
– at a convenient, high, and central
location with no obstructions
between the product and hub in
an indoor environment.
– away from electronic appliances
such as TVs, radios, personal
computers, wireless devices, or
other phones.
– facing away from radio frequency
transmitters, such as external
antennas of mobile phone cell
stations. (Avoid putting the hub
on a bay window or near a
window.)
R If the reception for a hub location is
not satisfactory, move the hub to
another location for better reception.
Environment
R Keep the product away from
electrical noise generating devices,
such as fluorescent lamps and
motors.
R Do not place heavy objects on top of
the product.
R The product should be kept away
from heat sources such as heaters,
kitchen stoves, etc. It should not be
placed in rooms where the
temperature is less than -20 °C
(-4 °F) or greater than 50 °C
(122 °F). Damp basements should
also be avoided.
R O
perating the product near electrical
appliances may cause interference.
Move away from the electrical
appliances.
Other information
C
AUTION: Risk of explosion if battery
is replaced by an incorrect type.
Dispose of used batteries according to
the instructions.
Routine care
R W
ipe the outer surface of the
product with a soft moist cloth.
R Do not use any cleaning products
that contain alcohol, polish powder,
powder soap, benzine, thinner, wax,
petroleum, or boiling water. Also do
not spray the product with
insecticide, glass cleaner, or hair
spray. This may cause a change in
color or quality of the product.
Information on Disposal in other
C
ountries outside the European
Union
These symbols are only valid in the
European Union. If you wish to discard
these items, please contact your local
authorities or dealer and ask for the
correct method of disposal.
6
For a
ssistance, please visit http://shop.panasonic.com/support
Important Information
HNS107_(en_en)_1210_ver.031.pdf 6 2015/12/10 16:49:07
Note for the battery removal
procedure
Refer to “Inserting the battery” on
page 9.
Notice
For a
ssistance, please visit http://shop.panasonic.com/support
7
Important Information
HNS107_(en_en)_1210_ver.031.pdf 7 2015/12/10 16:49:07
Part names and functions
A
D
C
E
B
Front cover
Mounting adaptor release lever
Mounting adaptor
M N
U
sed to confirm the status of the
sensor or register the sensor to
the hub.
LED indicator
LED indicator
You can press M N
and check the
LED indicator to confirm the sensor’s
status. After confirming the sensor’s
status, we recommend turning the LED
indicator off by pressing MN again
as soon as possible, otherwise battery
life may be reduced.
Indicator Status
Green, lit Door is closed
Red, lit Door is open
Red,
b
linking
Sensor is out of range
of the hub
Green,
b
linking
slowly
Registration mode
(You pressed and held
M
N)
Off No battery power
Note:
R T
he LED indicator does not indicate
sensor status if the sensor has not
been registered (page 10).
8
For a
ssistance, please visit http://shop.panasonic.com/support
Setup
HNS107_(en_en)_1210_ver.031.pdf 8 2015/12/10 16:49:07
Setup overview
1 Initial setup
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide included with your
hub.
2 Insert the battery
The sensor is battery powered.
3 Registration
Required only if the sensor was
purchased separately (i.e., not as
part of a bundle).
4 Confirm the installation area
Read the information in this
document to confirm that the
desired installation area is suitable
to proper operation.
5 Installation
Install the sensor in the desired
location.
Inserting the battery
R Use ONLY a CR2 Lithium battery.
R Confirm the polarities (
, ).
1 R
emove the front cover.
R Lift from the indented area (A)
and remove the cover (B).
A
B
2 I
nsert the battery.
3 A
ttach the front cover.
For a
ssistance, please visit http://shop.panasonic.com/support
9
Setup
HNS107_(en_en)_1210_ver.031.pdf 9 2015/12/10 16:49:07
Replacing the battery
Use this procedure when replacing the
battery after installation.
1 Remove the sensor from the
mounting adaptor by pressing the
release lever, sliding the sensor up
and lifting it away from the
mounting adaptor.
2 Remove the front cover.
3 Replace the battery with a new
one.
4 Attach the front cover.
5 Attach the sensor to the mounting
adaptor.
R The sensor will click into place
when it is secured.
R Make sure the “UP” marks on
the back of the sensor and the
inside of the mounting adaptor
point in the same direction.
Registering the
s
ensor
This procedure is not required for
d
evices that were included as part of
a bundle.
Before you can use the sensor, it must
b
e registered to the hub.
If you purchased devices separately
(i.e., not as part of a bundle), you must
register each device to the hub.
You can register each device by using
the registration buttons or the [Home
Network] app.
Using registration buttons
1 Hub:
Press and hold M OTHER
D
EVICEN until the LED indicator
blinks slowly in green.
2 Sensor:
Remove the front cover, and then
press and hold M
N
until the
LED indicator blinks slowly in
green (page 8).
R When registration is complete,
the hub sounds one long beep.
Note:
R To cancel without registering the
sensor, press MN on the hub and
on the sensor again.
R If registration fails, the hub sounds
several short beeps.
Using the app
W
hen you register the sensor by using
the [Home Network] app, you can
assign it a name and location. For
more information, refer to the User’s
Guide (page 16).
10
For a
ssistance, please visit http://shop.panasonic.com/support
Setup
HNS107_(en_en)_1210_ver.031.pdf 10 2015/12/10 16:49:07
Information about sensor features
The garage door sensor utilizes an
accelerometer to detect its orientation.
Please read the following information
before deciding where to install the
garage door sensor.
Note:
R The sensor is not designed to be
used in situations that require high
reliability. We do not recommend
use of the sensor in these situations.
R Panasonic takes no responsibility for
any injury or damage caused by the
use of the garage door sensor.
Compatible garage doors
Vertical
s
ection-type
Swing-up type
How an open door is detected
T
he sensor is installed by mounting it to
the interior-side of your garage door. It
should be mounted in such a way that
it is perpendicular to the ground when
the garage door is closed, and is tilted
when the garage door is opened.
When the garage door has opened far
enough to tilt the sensor beyond the
detection threshold (page 17), the
sensor is triggered.
Note:
R The sensor is not triggered if the
door is opened slightly.
Vertical section-type
A B C
Swing-up type
A B C
Door closed
As door opens, sensor is triggered
Door fully open
For a
ssistance, please visit http://shop.panasonic.com/support
11
Setup
HNS107_(en_en)_1210_ver.031.pdf 11 2015/12/10 16:49:07
Loading...