Panasonic kx-hns105 Operation Manual

Installation Guide
Home Network System
Indoor Siren
Model No. KX-HNS105
Thank you for purchasing a Panasonic product.
This document explains how to install the indoor siren properly. For details about how to use the system, refer to the User’s Guide (page 12).
Please read this document before using the unit and save it for future reference. For assistance, please contact us at 1-800-272-7033 or visit our
Web site: www.panasonic.com/support for customers in the U.S.A.
or Puerto Rico.
Please register your product: www.panasonic.com/prodreg
In order to use this device:
R Download the latest version of the [Home Network] app. R Update your hub to the latest firmware version
(version 5.00 or later).
For more information, refer to the User’s Guide (page 12).
Printed in China
HNS105_(en_en)_0209_ver.031.pdf 1 2015/02/09 21:38:39
Introduction
Accessory information ...............3
Important Information
About this system ......................4
For your safety ...........................
4
Important safety instructions ......5
For best performance ................5
Other information .......................6
Setup
Part names and functions ..........7
LED indicator .............................7
Setup overview ..........................7
Registering the siren ..................8
Confirming the usage area ........9
Installation ...............................10
Note about power
connections .............................11
Appendix
Testing the siren ......................12
Adjusting the siren’s volume ....12
Features available when using the
[Home Network] app ................12
Accessing the User’s Guide ....12
Specifications ..........................13
FCC and other information ......14
Customer services ...................15
Warranty (For United States and
Puerto Rico) .............................16
2
Table of Contents
HNS105_(en_en)_0209_ver.031.pdf 2 2015/02/09 21:38:39
Accessory information
Supplied accessories
No. Accessory item/Part number Quantity
A AC adaptor/PNLV2360Z 1 B DC extension cord/PNJA1159Z 1 C Wall mounting screws (25 mm (1 inch))/XTB4+25AVW 2
A B C
Other information
R D
esign and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product.
Trademarks
R i
Phone and iPad are registered trademarks of Apple Inc.
R Android is a trademark of Google Inc. R Microsoft, Windows, and Internet Explorer are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
R All other trademarks identified herein are the property of their respective owners.
For assistance, please visit www.panasonic.com/support
3
Introduction
HNS105_(en_en)_0209_ver.031.pdf 3 2015/02/09 21:38:39
About this system
R This system is an auxiliary system; it
is not designed to provide complete protection from property loss. Panasonic will not be held responsible in the event that property loss occurs while this system is in operation.
R The system’s wireless features are
subject to interference, therefore functionality in all situations cannot be guaranteed. Panasonic will not be held responsible for injury or damage to property that occurs in the event of wireless communication error or failure.
For your safety
T
o prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product.
WARNING
Power connection
R U
se only the power source marked
on the product.
R Do not overload power outlets and
extension cords. This can result in the risk of fire or electric shock.
R Completely insert the AC adaptor/
power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.
R Regularly remove any dust, etc.
from the AC adaptor/power plug by pulling it from the power outlet, then
wiping with a dry cloth. Accumulated d
ust may cause an insulation defect
from moisture, etc. resulting in a fire.
R Unplug the product from power
outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at www.panasonic.com/contactinfo
R Unplug from power outlets and
never touch the inside of the product if its casing has been broken open. Danger of electric shock exists.
R Never touch the plug with wet
hands. Danger of electric shock exists.
R Do not connect non-specified
devices.
Installation
R T
o prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture.
R Do not place or use this product
near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
R Do not allow the AC adaptor to be
excessively pulled, bent or placed under heavy objects.
R Install the product only on a vertical
surface. Do not install the product on a ceiling, as the product may fall, resulting in damage or injury.
R Keep small parts (screws, etc.) out
of the reach of children. There is a risk of swallowing. In the event they are swallowed, seek medical advice immediately.
4
For assistance, please visit www.panasonic.com/support
Important Information
HNS105_(en_en)_0209_ver.031.pdf 4 2015/02/09 21:38:39
Operating safeguards
R Unplug the product from power
outlets before cleaning. Do not use liquid or aerosol cleaners.
R Do not disassemble the product. R Never put metal objects inside the
product. If metal objects enter the product, turn off the circuit breaker and contact an authorized service center.
Medical
R C
onsult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. DECT features operate between 1.92 GHz and
1.93 GHz with a peak transmission power of 115 mW.
R Do not use the product in health
care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
CAUTION
Installation and location
R N
ever install wiring during a lightning storm.
R The AC adaptor is used as the main
disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible.
R To avoid the risk of strangulation,
keep the product and the AC adaptor cord at least 1 m (3 feet) from a child’s crib and out of the reach of small children.
Preventing accidents and injuries
R Do not put your ear(s) near the
product, as loud sounds emitted from the product may cause hearing impairment.
R Do not look directly at the strobe
light when it is flashing. Light emitted from the strobe light may cause damage to the eyes.
R Consider the installation
environment carefully when installing the product. Pay particular attention to infants, children, and the elderly, as they may be more sensitive to loud sounds and strobe lights.
Important safety i
nstructions
When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool.
2. Use only the power cord indicated in this document.
SAVE THESE INSTRUCTIONS
For b
est performance
Hub location/avoiding noise
T
he hub and other compatible Panasonic devices use radio waves to communicate with each other.
For assistance, please visit www.panasonic.com/support
5
Important Information
HNS105_(en_en)_0209_ver.031.pdf 5 2015/02/09 21:38:39
R F
or maximum coverage and noise-free communications, place your hub: – at a convenient, high, and central
location with no obstructions between the product and hub in an indoor environment.
– away from electronic appliances
such as TVs, radios, personal computers, wireless devices, or other phones.
– facing away from radio frequency
transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the hub on a bay window or near a window.)
R If the reception for a hub location is
not satisfactory, move the hub to another location for better reception.
Environment
R K
eep the product away from electrical noise generating devices, such as fluorescent lamps and motors.
R The product should be kept free
from excessive smoke, dust, high temperature, and vibration.
R The product should not be exposed
to direct sunlight.
R Do not place heavy objects on top of
the product.
R When you leave the product unused
for a long period of time, unplug the product from the power outlet.
R The product should be kept away
from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 0 °C (32 °F) or greater than 40 °C (104 °F). Damp basements should also be avoided.
R O
perating the product near electrical appliances may cause interference. Move away from the electrical appliances.
Other information
Routine care
R W
ipe the outer surface of the
product with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.
Notice
6
For assistance, please visit www.panasonic.com/support
Important Information
HNS105_(en_en)_0209_ver.031.pdf 6 2015/02/09 21:38:39
Part names and functions
A B
D
E
F
C
Horn Strobe light
F
lashes when the siren is
sounding.
LED indicator MH
IGHN/MLOWN
Used to adjust the siren’s volume (page 12).
Rear cover
M N
U
sed to register the siren to the
hub.
LED indicator
You can use the LED indicator to confirm the siren’s status.
Indicator Status
Green, lit Normal operation Red,
b
linking
slowly
Siren is not registered to a hub
Red, b
linking
Siren is out of range of the hub
Red, b
linking
quickly
Alarm system was triggered
Green, b
linking
Registration mode (You pressed and held M N)
Off No power
Setup overview
1 I
nitial setup
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide included with your
hub.
2 Registration
Required only if the siren was
purchased separately (i.e., not as
part of a bundle).
3 Confirm the installation area
Read the information in this
document to confirm that the
desired installation area is suitable
to proper operation.
For assistance, please visit www.panasonic.com/support
7
Setup
HNS105_(en_en)_0209_ver.031.pdf 7 2015/02/09 21:38:39
4 I
nstallation
Install the siren in the desired location.
Registering the siren
This procedure is not required for d
evices that were included as part of
a bundle.
Before you can use the siren, it must b
e registered to the hub. If you purchased devices separately (i.e., not as part of a bundle), you must register each device to the hub.
You can register each device by using the registration buttons or the [Home
Network] app.
Note:
R Before registering the siren, make
sure the AC adaptors of the hub and siren are connected and each device is powered.
Using registration buttons 1 H
ub:
Press and hold M
OTHER
D
EVICEN until the LED indicator
blinks in green.
2 Siren:
Press and hold M
N
until the LED indicator blinks in green (page 7). R When registration is complete,
the hub sounds one long beep.
Note:
R To cancel without registering the
siren, press MN on the hub and on the siren again.
R I
f registration fails, the hub sounds
several short beeps.
Using the app
W
hen you register the siren by using the [Home Network] app, you can assign a name to your devices and group them by location. For more information, refer to the User’s Guide (page 12).
8
For assistance, please visit www.panasonic.com/support
Setup
HNS105_(en_en)_0209_ver.031.pdf 8 2015/02/09 21:38:39
Confirming the usage area
Wireless communication r
ange
The wireless communication range of each device in the system from the hub is approximately 50 m (160 feet) indoors and approximately 300 m (1,000 feet) outdoors. Wireless communication may be unreliable when the following obstacles are located between the hub and other devices.
R Metal doors or screens R Walls containing aluminum-sheet
insulation
R Walls made of concrete or
corrugated iron
R Double-pane glass windows R Multiple walls R When using each device on
separate floors or in different buildings
Note:
R You can use the siren’s LED
indicator to confirm the siren’s communication status (page 7). If the LED indicator is lit in green or is blinking quickly in red, the siren is communicating properly with the hub.
Usage area cautions
U
sing the siren in the following areas may cause deformation, malfunction, or operational failure.
R In direct sunlight R Areas exposed to grease or steam,
such as kitchens
R N
ear fire or heating devices
R Near magnetic fields (such as near
microwaves and magnets)
R Areas subject to extreme
temperature changes, such as next to air conditioners
R Areas with reflective objects, such
as glass, that can interfere with detection of temperature variation
R Areas where the temperature is
affected by strong illuminating objects (such as fluorescent lights)
R Near devices that emit strong radio
waves, such as mobile phones
For assistance, please visit www.panasonic.com/support
9
Setup
HNS105_(en_en)_0209_ver.031.pdf 9 2015/02/09 21:38:39
Installation
Mount the siren on a wall using the holes in the rear cover.
Note:
R The strobe light flashes when the
siren sounds. Mount the siren in a location where its strobe light will be visible.
R Mount the siren on the stable
location where the siren can be adequately supported when mounting.
R Mount the siren securely to a wall.
Vibrations may cause it to fall if it is not secured.
R Do not mount siren on a soft
material. It may fall down, break or cause injury.
R Do not mount the siren on the
following places: gypsum board, ALC (autoclaved lightweight cellular concrete), concrete block, plywood less than 25.4 mm (1 inch) thick, etc.
R Use only the supplied Panasonic AC
adaptor PNLV236.
1 R
emove the rear cover by
pressing the upper sides of the cover (A) and sliding it down (B).
A
B
2 A
ttach the rear cover to the wall by
using screws (
1
).
R P
lace the rear cover with “UP
mark facing upwards.
R
2
37 mm (1 15/32 inches)
2
1
1
U
P
UP
10
For assistance, please visit www.panasonic.com/support
Setup
HNS105_(en_en)_0209_ver.031.pdf 10 2015/02/09 21:38:39
Loading...
+ 22 hidden pages