Panasonic KX-HNS104FX Operating Instructions
Installation Guide
Home Network System
Glass Break Sensor
Model No. KX-HNS104FX
Thank you for purchasing a Panasonic product.
This document explains how to install the glass break sensor properly.
For details about how to use the system, refer to the User’s Guide
(page 17).
Please read this document before using the unit and save it for future
reference.
Table of Contents
Introduction
Accessory information ...............3
Important Information
Disclaimer ..................................4
About this system ......................4
For your safety ...........................4
Important safety instructions ......5
For best performance ................5
Other information .......................6
Setup
Part names and functions ..........8
LED indicator .............................8
Setup overview ..........................8
Inserting the batteries ................9
Registering the sensor .............10
Confirming the usage area ......11
Information about sensor
features ....................................12
Wall mounting ..........................14
Appendix
Adjusting the sensor
sensitivity .................................17
Features available when using the
[Home Network] app ................17
Accessing the User’s Guide ....17
Specifications ..........................18
2
Introduction
Accessory information
Supplied accessories
No. Accessory item/Part number Quantity
A
B
C Wall mounting screws (25 mm) 2
*1 When replacing batteries, see “Power source” of “Specifications”, page 18
for battery information.
*2 The sensor can be wall mounted with or without the wall mounting adaptor
(page 14).
A B C
Other information
R Design and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product.
Trademarks
R iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other
countries.
R Android is a trademark of Google Inc.
R Microsoft, Windows, and Internet Explorer are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
R All other trademarks identified herein are the property of their respective owners.
*1
Batteries
Wall mounting adaptor
2
*2
1
3
Important Information
Disclaimer
When properly installed and
maintained, this product is designed to
help provide an added layer of notice in
the case of broken glass. Panasonic
makes no representations or
warranties that it will at all times, or
under all circumstances, or in any
given circumstance, detect broken
glass, or work with all types of glass, or
that it will prevent loss of or damage to
property or persons. Panasonic shall
have no liability for any personal injury,
or damage to property or other loss, of
any kind, should the product fail to
warn or notify.
About this system
R This system is an auxiliary system; it
is not designed to provide complete
protection from property loss.
Panasonic will not be held
responsible in the event that
property loss occurs while this
system is in operation.
R The system’s wireless features are
subject to interference, therefore
functionality in all situations cannot
be guaranteed. Panasonic will not
be held responsible for injury or
damage to property that occurs in
the event of wireless communication
error or failure.
For your safety
To prevent severe injury and loss of life/
property, read this section carefully
before using the product to ensure
4
proper and safe operation of your
product.
WARNING
Power connection
R Use only the power source marked
on the product.
R Do not connect non-specified
devices.
Installation
R To prevent the risk of fire or
electrical shock, do not expose the
product to rain or any type of
moisture.
R Do not place or use this product
near automatically controlled
devices such as automatic doors
and fire alarms. Radio waves
emitted from this product may cause
such devices to malfunction
resulting in an accident.
R Install the product only on a vertical
surface. Do not install the product on
a ceiling, as the product may fall,
resulting in damage or injury.
R Keep small parts (screws, etc.) out
of the reach of children. There is a
risk of swallowing. In the event they
are swallowed, seek medical advice
immediately.
Operating safeguards
R Do not disassemble the product.
Medical
R Consult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. DECT features
operate between 1.88 GHz and
1.90 GHz with a peak transmission
power of 250 mW.
R Do not use the product in health
care facilities if any regulations
posted in the area instruct you not to
do so. Hospitals or health care
facilities may be using equipment
that could be sensitive to external
RF energy.
CAUTION
Battery
R The batteries should be used
correctly, otherwise the product may
be damaged due to battery leakage.
R Do not charge, short-circuit,
disassemble, or heat the batteries.
R Do not dispose of batteries in a fire.
R Remove all the batteries when
replacing.
R Do not mix old, new or different
types of batteries.
R It is recommended that batteries are
replaced annually.
R Keep out of the reach of small
children. There is a risk of
swallowing. If the battery is
swallowed, seek medical attention
immediately.
R Remove the battery if it becomes
unusable. There is a risk of leakage,
overheating, and rupture. Do not
attempt to use a battery if it is
leaking.
R Do not intentionally pour water on
the battery or allow it to get wet.
There is a risk of fire and smoke. If
the battery becomes wet, remove it
immediately and contact an
authorised service centre.
Important Information
Important safety instructions
When using your product, basic safety
precautions should always be followed
to reduce the risk of fire, electric shock,
and injury to persons, including the
following:
1. Do not use this product near water
for example, near a bathtub,
washbowl, kitchen sink, or laundry
tub, in a wet basement or near a
swimming pool.
2. Use only the batteries indicated in
this document. Do not dispose of
batteries in a fire. They may
explode. Check with local codes for
possible special disposal
instructions.
SAVE THESE INSTRUCTIONS
For best performance
Hub location/avoiding noise
The hub and other compatible
Panasonic devices use radio waves to
communicate with each other.
R For maximum coverage and
noise-free communications, place
your hub:
– at a convenient, high, and central
location with no obstructions
between the product and hub in
an indoor environment.
– away from electronic appliances
such as TVs, radios, personal
computers, wireless devices, or
other phones.
– facing away from radio frequency
transmitters, such as external
5
Important Information
antennas of mobile phone cell
stations. (Avoid putting the hub
on a bay window or near a
window.)
R If the reception for a hub location is
not satisfactory, move the hub to
another location for better reception.
Environment
R Keep the product away from
electrical noise generating devices,
such as fluorescent lamps and
motors.
R The product should be kept free
from excessive smoke, dust, high
temperature, and vibration.
R The product should not be exposed
to direct sunlight.
R Do not place heavy objects on top of
the product.
R The product should be kept away
from heat sources such as radiators,
cookers, etc. It should not be placed
in rooms where the temperature is
less than 0 °C or greater than 40 °C.
Damp basements should also be
avoided.
R Operating the product near electrical
appliances may cause interference.
Move away from the electrical
appliances.
R The sensor may make false
detections in noisy locations, such
as where there is noise from metallic
blinds opening and closing, or
metallic bells of alarm clocks. Avoid
installing the sensor in these
locations.
R The sounds of doors opening and
closing may cause false detections.
Do not install the sensor near doors.
R Do not place screens or shielding
(such as sound blocking curtains)
between the glass and sensor. This
may prevent the sensor from being
6
able to detect the sound of glass
breaking.
R The product may not be able to
detect the sound of glass breaking
depending on the noise conditions of
the surrounding area.
R To avoid false detections, do not
install the product in areas where
loud noises occur or near devices
that produce loud noise.
R Refer to “Sensor detection range” on
page 13 and install the product
within the wireless communication
range of the hub.
Other information
CAUTION: Risk of explosion if battery
is replaced by an incorrect type.
Dispose of used batteries according to
the instructions.
Routine care
R Wipe the outer surface of the
product with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.
Loading...