Panasonic DMR-E85, DMR-ES30, DMR-EX88, DMR-ES10 User Manual
Quick Set Up: Timer Recording.
DMR-E55, DMR-E85 DMR-ES10, DMR-EH50, DMR-EH60 & DMR-ES30.
Timer recording allows the convenient function of pre-setting your DVD recorder to
record programs when you are not there, this will give you a basic guide on how to
set timer recording.
1. Turn your DVD recorder on at the wall also on using the <Power Button> below
and put your TV onto the channel that you view your DVD recorder on.
2. Press the <Prog/check button>. ( The buttons position may vary depending on
your recorder the most common two are shown below, if you are unsure please
check your operating instructions)
(DMR-E55, E85, ES10 & ES30) (DMR-EH60 & EH50)
3. Using the move up and down until “New Timer Programme” is
highlighted and press, the <Enter button>. (see menu below)
4. After pressing the <Enter button> it will display the screen for entering in the
details for the programme you want to record.
With Hard Drive. Without Hard Drive.
or
This is a basic guide to set up one off timer recordings for more advanced timer functions
and information please consult your operating instructions, for more information please
check out the FAQ section on our website www.panasonic.om.au .
Quick Set Up: Timer Recording.
DMR-E55, DMR-E85 DMR-ES10, DMR-EH50, DMR-EH60 & DMR-ES30.
(DMR-ES10, E55 & ES30) (DMR-EH50, EH60 & E85)
5. * First select the Channel you wish to * Next use the to select the
record, this is the “Name” section of the date, use the to select
menu, use the to select the correct date.
correct channel.
* Next use the to select the start * Next use the to select the
time of the programme, use the stop time of the recorder, use the
to scroll, by holding down the button will to select the time the
move the time in 30min increments by recorder will finish recording.
pressing it once will move it 1min at a time.
* Next only applies to recorders with * Next use select the
a hard drive. Use the to select “Mode”. Use the
“HDD/DVD” use the to select to select the speed the unit will
the format that the unit will record in. record at.
6. If all the information on the screen is correct press the timer button
. The unit will then go into the standby mode waiting for
the time for it to start recording.
This is a basic guide to set up one off timer recordings for more advanced timer functions
and information please consult your operating instructions, for more information please
check out the FAQ section on our website www.panasonic.om.au .
Loading...