Panasonic DMP-BD85, DMP-BD85EGK User Manual

Operating Instructions

For Canada only: The word “Participant” is used in place of the word

“Partner”.

As an ENERGY STAR Partner, Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Blu-ray Disc Player

Model No. DMP-BD85

Dear customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.

La referencia rápida en español se puede encontrar en la página 42.

P PC

If you have any questions contact

U.S.A. and Puerto Rico : 1-800-211-PANA(7262) Canada : 1-800-561-5505

U.S.A. and Puerto Rico : The warranty can be found on page 40. Canada :The warranty can be found on page 41.

VQT2H76

Getting started

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

RISK OF ELECTRIC SHOCK

NOT OPEN

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with

the manufacturer ’s instructions.

8 Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or

when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been exposed

to rain or moisture, does not operate normally, or has been dropped.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, ≥DO NOT EXPOSE THIS APPARATUS TO RAIN,

MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

≥USE ONLY THE RECOMMENDED

ACCESSORIES.

≥DO NOT REMOVE THE COVER (OR BACK);

THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

CAUTION!

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

VQT2H76

THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

≥ Reorient or relocate the receiving antenna. ≥ Increase the separation between the equipment and receiver. ≥ Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

≥ Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, follow the attached

installation instructions and use only shielded interface cables when connecting to peripheral devices.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094

Support Contact: Panasonic Consumer Electronics Company Telephone No.: 1-800-211-PANA (7262)

Getting started

IMPORTANT SAFETY

INSTRUCTIONS . . . . . . . . . . . . . . . . 2

Accessory . . . . . . . . . . . . . . . . . . . . . 4

Unit and media care . . . . . . . . . . . . . 4

Control reference guide . . . . . . . . . . 5

Playable discs/Cards/

USB devices . . . . . . . . . . . . . . . . . . . 6

Connections & Settings

STEP 1 : Connecting to a TV . . . . . . 8

STEP 2 : Connecting to

an amplifier/receiver . . . . . 9

STEP 3 : Connecting to

a broadband network. . . . 10

STEP 4 : Connecting to

an AC power . . . . . . . . . . 11

STEP 5 : Setting . . . . . . . . . . . . . . . 12

STEP 6 : Reprogramming

the remote control . . . . . . 14

Settings

Playback menu . . . . . . . . . . . . . . . . 24

Setup menu . . . . . . . . . . . . . . . . . . 26

Reference

Troubleshooting guide . . . . . . . . . . 30

Messages . . . . . . . . . . . . . . . . . . . . 32

Audio Information . . . . . . . . . . . . . . 33

About MP3/JPEG/DivX/

AVCHD/MPEG2 files . . . . . . . . . . . 35

Specifications . . . . . . . . . . . . . . . . . 37

Supplemental information. . . . . . . . 38

Glossary . . . . . . . . . . . . . . . . . . . . . 39

Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO) Limited Warranty

(Only for CANADA). . . . . . . . . . . . . 41

Referencia rápida en español

(Spanish Quick Reference) . . . . . . . . . . 42

Index. . . . . . . . . . . . . . . . . .Back cover

. . . 40

Getting startedConnections & SettingsPlaybackSettingsReference

Playback

Inserting or removing a media . . . . 15

FUNCTIONS menu . . . . . . . . . . . . . 15

Playing video contents . . . . . . . . . . 16

Playing still pictures . . . . . . . . . . . . 20

Playing music . . . . . . . . . . . . . . . . . 21

Linked operations with the TV

(VIERA LinkTM “HDAVI ControlTM”) . . . . . . . . . . 22

Enjoying VIERA CASTTM. . . . . . . . . 23

About descriptions in these operating instructions

≥ Instructions for operations are generally described

using the remote control.

About Firmware updates (> 14)

VQT2H76

Accessory

(Alkaline or manganese batteries)

DO NOT

Unit and media care

Check the supplied accessories before using this unit.

1 Remote control

(N2QAKB000076)

1 Audio/Video cable

(K2KA6BA00004)

2 Batteries for remote control

1 AC power supply cord

(K2CB2CB00022)

1 Wireless LAN Adaptor (DY-WL10)

(C5ZZZ0000048)

1 USB extension cable

(K2KYYYY00064)

(ONLY FOR CANADA) The enclosed Canadian French label sheet corresponds to the English display on the front and back side of the unit.



≥ Product numbers correct as of December 2009. These may be subject to

change.

≥ Do not use AC power supply cord and Wireless LAN Adaptor with other

equipment.

≥ Only for U.S.A. and Puerto Rico: To order accessories, refer to “Accessory

Purchases (United States and Puerto Rico)” on page 40. For other areas: To order accessories, call the dealer from whom you have made your purchase.

Using the remote control

Insert so the poles (i and j) match those in the remote control.





∫ Clean this unit with a soft, dry cloth

≥ Never use alcohol, paint thinner or benzine to clean this

unit.

≥ Before using chemically treated cloth, carefully read the

instructions that came with the cloth.

∫ Clean the lens with the lens cleaner

disc

Lens cleaner disc: RP-CL720PP (not included) ≥ This lens cleaner is sold as specific for DIGA, but can be

used on this unit as well.

∫ Clean discs

Wipe with a damp cloth and then wipe dry.

∫ Disc and card handling precautions

≥ Handle discs by the edges to avoid inadvertent scratches or

fingerprints on the disc.

≥ Do not attach labels or stickers to discs. ≥ Do not use record cleaning sprays, benzine, thinner, static

electricity prevention liquids or any other solvent.

≥ Clean any dust, water, or foreign matter from the terminals

on the rear side of the card.

≥ Do not use the following discs: – Discs with exposed adhesive from removed stickers or

labels (rented discs etc). – Discs that are badly warped or cracked. – Irregularly shaped discs, such as heart shapes.

R6/LR6, AA

Point it at remote control signal sensor on this unit. (> 5)



Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.

≥ Do not mix old and new batteries or different types at the same time. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight

for a long period of time with doors and windows closed.

≥ Do not take apart or short circuit. ≥ Do not attempt to recharge alkaline or manganese batteries. ≥ Do not use batteries if the covering has been peeled off.

Remove batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

VQT2H76

∫ To dispose or transfer this unit

The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings. (>30, “To return all settings to the factory preset.”) ≥ The operation history may be recorded in the memory of

this unit.

Control reference guide

1 2

4 5

16 17

SD CARD

Pull to flip down the front panel.

1 Turn the unit on and off (> 12) 2 TV operation buttons (> 14)

You can operate the TV through the unit’s remote control. [Í TV POWER] : Turn the television on and off [INPUT] : Input select [ijVOL] : Adjust the volume [WXCH] : Channel select

3 Select title numbers, etc./Enter numbers or characters

(> 23)

[CANCEL] : Cancel 4 Show playback menu (> 24) 5 Switch on/off Secondary Video (Picture-in-picture) (> 18) 6 Basic playback control buttons (> 16) 7 Show status messages (> 16) 8 Show Pop-up menu (> 16) 9 Show Top menu/Direct Navigator (> 16) 10 Show sub menu (> 17) 11 These buttons are used when;

≥ Operating a BD-Video disc that includes Java

applications (BD-J).

≥ Displaying “Title View” and “Album View” screens.

(> 20)

≥ Operating contents of VIERA CAST. (> 23) 12 Transmit the remote control signal 13 Open or close the disc tray (> 15)

CAUTION

Do not place objects in front of the unit. The disc tray may

collide with objects when it is opened, and this may cause

injury. 14 Adjust the volume of an amplifier/receiver. 15 Select audio (> 16) 16 Select drive (BD/DVD/CD, SD card or USB device)

(> 15) 17 Displays the Home screen of the VIERA CAST (> 23) 18 Exit the menu screen 19 Show FUNCTIONS menu (> 15) 20 Selection/OK, Frame-by-frame (> 16) 21 Return to previous screen

Getting started

1 72 3

1 POWER button (POWER Í/I) (> 12)

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

2 Display

Disc indicator SD card indicator USB device indicator

The indicator blinks when reading data from a disc, a card or a USB device, or writing data to a card.

3 Disc tray (> 15)

5 64

SD CARD

8 9 10

4 Remote control signal sensor

Distance: Within approx. 7 m (23 feet)

Angle: Approx. 20e up and down, 30e left and right 5 Stop (> 16) 6 Start play (> 16) 7 Open or close the disc tray (> 15) 8 SD Card LED

≥ It is possible to set the LED to turn on/off. (> 28) 9 SD card slot (> 15) 10 USB port (> 15)

Rear panel terminals (> 8–11)

VQT2H76

Playable discs/Cards/USB devices

USB

Type Logo examples Type detail Playable contents

BD-Video Video

BD-RE

BD-R

DVD-Video Video

DVD-RAM

Video JPEG

Video

DivX

Video AVC H D JPEG

DVD

DVD-R

Video AVC H D DivX MP3

DVD-R DL

DVD-RW

JPEG

Video AVC H D

—

+R/+RW/+R DL

Music CD Music [CD-DA]

DivX

—

CD-R

CD-RW

Music [CD-DA] MP3 JPEG

SD Memory Card (8 MB to 2 GB)

(Includes miniSD Card and microSD Card)

SDHC Memory Card (4 GB to 32 GB)

(Includes microSDHC Card)

SDXC Memory Card (48 GB, 64 GB)

(Includes microSDXC Card)

—

USB devices

(up to 128 GB)

MPEG2 AVC H D JPEG

DivX MP3 JPEG

VQT2H76

∫ Discs that cannot be played in this unit

ALL

Any other disc that is not specifically supported or previously described.

≥ 2.6 GB and 5.2 GB DVD-RAM ≥ DVD-RAM that cannot be removed from cartridge ≥ Super Audio CD ≥ Photo CD ≥ DVD-Audio ≥ Video CD and Super Video CD ≥ WMA discs ≥ PAL discs ≥ HD DVD ≥ BD-Video discs recorded at a rate of 50 fields/sec

∫ Region management information

BD-Video

This unit plays BD-Video marked with labels containing the region code A. Example:

DVD-Video

This unit plays DVD-Video marked with labels containing the region number “1” or “ALL”. Example:

∫ SD card

≥ MiniSD Cards, microSD Cards, microSDHC

Cards and microSDXC Cards can be used, but must be used with an adaptor card. These are usually supplied with such cards, or otherwise customer provided.

≥ Keep the Memory Card out of reach of children

to prevent swallowing.

≥ To protect the card’s contents, move the record prevention

tab (on the SD card) to “LOCK”.

≥ This unit is compatible with SD Memory Cards that meet SD

Card Specifications FAT12 and FAT16 formats, as well as SDHC Memory Cards in FAT32 format (Does not support long file name.) and SDXC Memory Cards in exFAT.

≥ If the SD card is used with incompatible computers or

devices, recorded contents may be erased due to the card being formatted etc.

≥ Useable memory may be slightly less than the card

capacity.

∫ USB device

≥ This unit supports connecting a USB memory, digital

camera and video camera produced by Panasonic, etc. It is not warranted that all USB devices will work with this unit.

≥ This unit does not support USB device charging. ≥ FAT12, FAT16 and FAT32 file systems are supported. ≥ This unit supports USB 2.0 High Speed.



≥ It may not be possible to play the above media in some cases due to the

type of media, the condition of the recording, the recording method and how the files were created.

≥ The producers of the disc can control how discs are played, so you may

not always be able to control play as described in these operating instructions. Read the disc’s instructions carefully.

Getting started

∫ Finalize

DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by a recorder, etc. needs to be finalized by the recorder to play on this unit. Please refer to the recorder’s instructions.

∫ BD-Video

This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in BD-Video. In order to enjoy these audio formats, refer to page 33.

∫ Music CD

≥ Operation and sound quality of CDs that do not conform to

CD-DA specifications (copy control CDs, etc.) cannot be guaranteed.

≥ The digital audio content side of a DualDisc does not meet

the technical specifications of the Compact Disc Digital Audio (CD-DA) format so playback may not be possible.

VQT2H76

STEP 1 : Connecting to a TV

Highest Quality (VIDEO)

Standard Quality (VIDEO)

HDMI cable

COMPONENT

VIDEO IN

AUDIO IN

R L

Component Video cable

Audio/Video cable (included)

AUDIO IN

R L

VIDEO IN

Audio/Video cable (included)

≥ Do not place the unit on amplifiers/receivers or equipment

that may become hot. The heat can damage the unit.

≥ Before making any connections we suggest you temporarily

disconnect all the units from AC power.

≥ Do not connect video signals through a video recorder. Due

to copy guard protection the picture may not be displayed properly.

≥ Please use High Speed HDMI Cables that have the HDMI

logo (as shown on the cover). It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0 meters (16.4 ft) or less. Recommended part number: RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.), RP-CDHS50 (5.0 m/16.4 ft.), etc.

≥ Refer to page 34, about recommended settings for each

piece of connected equipment.

∫ Via an HDMI AV OUT terminal ∫ Via a COMPONENT VIDEO

OUT terminal

∫ Via a VIDEO OUT terminal

HDMI IN

≥ The HDMI connection supports

VIERA Link “HDAVI Control” (> 22) when used with a compatible Panasonic TV.

≥ Set “HDMI Video Mode” and “HDMI

Audio Output” to “On” (> 28).

≥ Connect terminals of the same color. ≥ Set “Component Video Resolution” to

“480p”, “720p” or “1080i” (> 28).

≥ Set “HDMI Video Mode” to “Off”

(> 28).

≥ Connect terminals of the same color.

VQT2H76

STEP 2 : Connecting to an amplifier/receiver

HDMI IN

HDMI OUT

Multi channel speakers

Amplifier/receiver

HDMI cable

Amplifier/receiver

Coaxial cable

Optical cable









Connect Audio cables to terminals corresponding to the speakers you have connected.

Multi channel speakers

Amplifier/receiver

Digital Audio Analog Audio

∫ Via an HDMI AV OUT terminal ∫ Via a COAXIAL or OPTICAL

terminal

COAXIAL IN

OPTICAL IN

∫ Via a 5.1/7.1ch AUDIO OUT

terminal

Connections & Settings

≥ The HDMI connection supports

VIERA Link “HDAVI Control” (> 22) when used with a compatible Panasonic TV.

≥ Set “HDMI Video Mode” and “HDMI

Audio Output” to “On” (> 28).

≥ Set “Digital Audio Output” depending

on the used terminal and connected amplifier/receiver (> 27).

≥ When connecting a TV (> 8) with

HDMI AV OUT terminal, set “HDMI Audio Output” to “Off” (> 28).

≥ Set “Digital Audio Output” depending

on the used terminal and connected amplifier/receiver (> 27).

Cable connections

a Surround back speaker (L/R)

(Only for 7.1ch AUDIO OUT)

b Front speaker (L/R) c Surround speaker (L/R) d Subwoofer e Center speaker

≥ Set the “Analog Audio Output” to

“7.1ch” or “2ch (Downmix) + 5.1ch”, depending on the used terminal (> 28).

≥ You can set the “Analog Audio

Output” from the easy setting (> 12).

≥ When connecting equipment with

HDMI AV OUT terminal, set “HDMI Audio Output” to “Off” (> 28).

VQT2H76

STEP 3 : Connecting to a broadband network

Broadband router, etc.

LAN Cable

Modem (Broadband) *Provided by ISP

Wireless router (Access point), etc.

Modem (Broadband) *Provided by ISP

Wireless LAN Adaptor (included)

LAN Cable

The following services can be used when this unit is connected to broadband.

≥ Firmware can be updated (> 14) ≥ You can enjoy BD-Live (> 18)

For details about connection method, refer to the instructions supplied with the connected equipment. ≥ It may not work properly depending on the equipment or

environment used.

≥ You can enjoy VIERA CAST (> 23)

∫ Using LAN (ethernet) cable ∫ Using Wireless LAN Adaptor (DY-WL10)

≥ Use shielded LAN cables when connecting to peripheral

devices.

≥ Inserting any cable other than a LAN cable in the LAN

terminal can damage the unit.

≥ Wireless LAN Adaptors other than the included Wireless

LAN Adaptor cannot be used.

≥ When connection conditions are poor, use the included

USB extension cable to connect the Wireless LAN Adaptor provided with this unit.

≥ Do not use any other USB extension cables except the

supplied one.

≥ For up to date compatibility information on your Wireless

router (Access Point) refer to http://panasonic.co.jp/pavc/global/cs For additional information about this unit refer to http://www.panasonic.com/consumer/support

Precautions of Wireless LAN Adaptor

The following limits are in place regarding the usage of this device. You must be aware of these limits before using this device. Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits, or to any condition of use or disuse of this device.

≥ This device is to be used as a wireless LAN device. ≥ Do not use this device to connect to any wireless network for which

you do not have usage rights.

During automatic searches in a wireless network environment, wireless networks (SSID*) for which you do not have usage rights may be displayed; however, using these networks may be regarded as illegal access. * An SSID (Service Set IDentification) is a name used by wireless LAN to

identify a particular network. Transmission is possible if the SSID matches for both devices.

≥ Data transmitted and received over radio waves may be intercepted

and monitored.

≥ This wireless LAN adaptor contains delicate electronic components.

Please use this adaptor in the manner in which it was intended and follow the following points: – Do not expose the adaptor to high temperatures or direct sunlight. – Do not bend, or subject the adaptor to strong impacts. – Keep the adaptor away from moisture. – Do not disassemble or alter the adaptor in any way. – Do not attempt to install the adaptor in any incompatible device.

VQT2H76

THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA.

AC power supply cord (included)

To a household AC outlet

This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This product is restricted to indoor use due to its operation in the 5.15 to

5.25 GHz frequency range. FCC and IC require this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product.

The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. Wireless LAN adaptor (DY-WL10) has been tested and found to comply with FCC/IC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.

THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

≥ Reorient or relocate the receiving antenna. ≥ Increase the separation between the equipment and receiver. ≥ Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

≥ Consult the dealer or an experienced radio/TV technician for help.

FCC caution: To maintain compliance with FCC regulations, shielded interface cables must be used with this equipment. Operation with non-approved equipment or unshielded cables may result in interference to radio and TV reception. Any changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094

Support Contact: Panasonic Consumer Electronics Company Telephone No.: 1-800-211-PANA (7262)

THE FOLLOWING APPLIES ONLY IN CANADA.

This Class B digital apparatus complies with Canadian ICES-003.

Product Identification Marking is located on the bottom of unit.

STEP 4 : Connecting to an AC power

≥ This unit consumes a small amount of AC power (“Quick

Start”: “Off”, less than 0.1 W) even when turned off. In the interest of power conservation, if you will not be using this unit for an extended period of time, it can be disconnected.

The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle.

Connections & Settings

VQT2H76

STEP 5 : Setting

RETURN

Access Point Connection Setting

Select a connection method to use with an access point of Wireless LAN. Please refer to the operating instructions of the access point about connection methods.

WPS (PUSH button method)

Other methods

WPS (PIN code method)

Search for access point

Manual setting

Network Easy Setting

Easy Setting

After connecting your new player for the 1st time and pressing the power button, a screen for the basic settings will appear.

Preparation

Turn on the television and select the appropriate video input on the television.

1 Press [Í POWER].

Setup screen appears. If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later via an HDMI cable, then the setting information on the TV is acquired by this TV.

2 Follow the on-screen instructions and

make the settings with [3, 4] and press [OK].

After completing “Easy Setting”, you can perform “Network Easy Setting”.



≥ You can perform this setup anytime by selecting “Easy Setting” in the

Setup menu. (

≥ Initial setting is set to “2ch (Downmix) + 5.1ch”, so you will need to select

“7.1ch” if using the 7.1ch output.

Analog Audio Output

> 29)

Set unit’s analog audio output.

After completing “Easy Setting”, you can continuously perform “Network Easy Setting”. ≥ Before you perform the wireless network settings on this

unit, confirm the set up of your Wireless router (Access point) is done correctly on your PC.

1 Select “Wired” or “Wireless” and press

[OK].

Network Easy Setting (Connection Check)

A settings check for home network and Internet connections is now being conducted.

Please select a connection mode first. Current setting : Wired

LAN cable connection: Connect a LAN cable to the unit and select “Wired.” Wireless LAN connection: Insert a compatible Wireless LAN Adaptor to USB port and select “Wireless.” Access point is necessary for Wireless LAN connection.

RETURN

Wired

Wireless

2 Follow the on-screen instructions and

make the settings with [3, 4, 2, 1] and press [OK].

For wireless LAN connection:

If you are using a Wireless router (Access point) that supports WPS, you can easily perform the settings by selecting “WPS (PUSH button method)”. Otherwise, perform the settings by selecting “Search for access point” or “Manual setting” in “Other methods”.

Select only “7.1ch” to enjoy audio from a receiver through 7.1ch analog connections. Otherwise, select “2ch (Downmix) + 5.1ch.”

2ch (Downmix) + 5.1ch

7.1ch

RETURN

VQT2H76

≥ WPS (Wi-Fi Protected Setup) is a function that facilitates

settings relating to the connection and security of wireless LAN devices. To see whether your Wireless router (Access point) supports WPS, check the Wireless router operating instructions.

When you experience

Network Easy Setting (Connection Check)

Yes No

Complete.

1. LAN cable connection

2. IP address setting

3. Connection to gateway

LAN cable is not connected. Please check the connection.

Select “Yes” and press [OK] to check network connection again. Select “No” and press [OK] to finish Network Easy Setting.

: Fail : Fail : Fail

Network Easy Setting (Internet Connection Check)

Complete.

- Connection to the Internet : Fail(Error code: B019)

Failed the connection test. Cannot find the server.(Error code: B019) Please refer to the operating instructions for the cause

of the error and the solution for it. Press [OK].

problems with settings

Access Point Connection Setting

Failed to connect to the access point.

A conflict with another device occurred.

Do you want to configure Access Point Connection Setting again ?

Yes No

Display Check the following

A conflict with another device occurred.

A time out error occurred.

An authentication error or a time out error occurred.

A device error occurred.

Network Easy Setting (Connection Check)

≥ Please wait a few moments,

and then try again.

≥ Setting of the Wireless

router (Access point) for MAC Address etc.

≥ The signal may be weak.

Using the included USB extension cable, adjust the position of the Wireless LAN Adaptor.

≥ The SSID and the

encryption key of the Wireless router (Access point).

≥ Please wait a few moments,

and then try again.

≥ Connection of Wireless LAN

Adaptor If there is no improvement in symptom, contact our Customer Service Center.

1. LAN cable connection or Connection to access point

:Pass

2. IP address setting : Fail

3. Connection to gateway : Fail

1. LAN cable connection or Connection to access point

:Pass

2. IP address setting : Pass

≥ Connection

and settings of the hub and router

≥ Settings of

“IP Address/ DNS Settings” (> 29)

3. Connection to gateway : Fail

Network Easy Setting (Internet Connection Check)

Display Check the following

Cannot find the server. (Error code: B019)

≥ Settings of “IP Address/DNS

Settings” (> 29)

≥ The server may be busy or the

Failed to connect to the server. (Error code: B020)

service may have been suspended. Please wait a few moments, and then try again.

≥ Settings of “Proxy Server

Settings” (> 29) and the router



≥ Refer to the operating instructions of the hub or router. ≥ You can perform this setup anytime by selecting “Network Easy Setting” in

the Setup menu. (

≥ You can redo these settings individually using “Network Settings”. ( ≥ If you experience problems after selecting “Wireless”, you should

first confirm the setting of your Wireless router (Access point) connected to your home network using your PC.

≥ After performing network settings on this unit, the settings (encryption

level, etc.) of the Wireless router (Access point) might change. When you have trouble getting online on your PC, perform the network settings on your PC in accordance with the settings of Wireless router (Access point).

> 29)

Connections & Settings

Display

1. LAN cable connection or Connection to access point

2. IP address setting : Fail

3. Connection to gateway : Fail

:Fail

Check the

following

≥ Connection of

the LAN cables (> 10)

VQT2H76

Firmware updates

Firmware Update

Latest Online Version: x.xx Current Installed Version: x.xx Do you want to start firmware update? For the update information, please visit the following website: http://panasonic.net/support/

RETURN

Yes No

The firmware was updated.

Current Installed Version

x.xx

RETURN

STEP 6 :

Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge.

This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection. When a new firmware version is available, the following screen is displayed.

DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place. After the firmware is installed, “FINISH” will be displayed on the unit’s display. Unit will restart and the following screen will be displayed.

Reprogramming the remote control

For other Panasonic products

Change “Remote Control Code” (> 29) on the main unit and the remote control (the two must match) if you place other Panasonic products close together and it responds to this remote control.

For TV or amplifier/receiver

You can operate the TV or amplifier/receiver using the unit’s remote control.

1 For televisions

Input the code (> 38) with the numbered buttons while pressing [Í TV POWER].

For amplifiers/receivers

Input the code (> 38) with the numbered buttons while pressing [RECEIVER j VOL].

e.g., 0001: [0] B [0] B [0] B [1]



≥ You can perform update anytime by selecting “Firmware Update” in the

Setup menu. (

≥ If downloading on this unit fails or this unit is not connected to the

Internet, then you can download the latest firmware from the following website and burn it to a CD-R to update the firmware. http://panasonic.co.jp/pavc/global/cs (This site is in English only.)

To show the firmware version on this unit. ( Information”)

≥ Downloading will require several minutes. It may take longer or the

ernet may not be connected depending on the connection environment.

Int

≥ If you do not want to check for the latest firmware version, set “Automatic

Update Check” to “Off”. (

VQT2H76

> 29)

>29, “System

> 29)

2 Test by turning on the television or

adjusting the volume of the amplifier/ receiver.



≥ If your television or amplifier/receiver brand has more than one code

listed, select the one that allows correct operation.

+ 30 hidden pages

Panasonic DMP-BD85, DMP-BD85EGK User Manual

IMPORTANT SAFETY INSTRUCTIONS

Table of contents

Getting started

Connections & Settings

Settings

Reference

Playback

Accessory

Unit and media care

Control reference guide

Playable discs/Cards/USB devices

STEP 2 : Connecting to an amplifier/receiver

STEP 3 : Connecting to a broadband network

STEP 4 : Connecting to an AC power

STEP 5 : Setting