Panasonic CQ-RX200W, CQ-RX105W, CQ-RX101W, CQ-RX300W, CQ-RX102W User Manual

Operating Instructions

AAC WMA MP3 CD Player/Receiver

Model: CQ-RX300W

WMA MP3 CD Player/Receiver

Model: CQ-RX200W/CQ-RX105W/

CQ-RX102W/CQ-RX101W

• Please read these instructions carefully before using this product and keep this manual for future reference.

(CQ-RX300W)

Q’ty

Mounting Collar

(YEFX0217263A)

Trim Plate

(YGFC051023)

Power Connector

(K1HY13YY0003)

\CQ-RX300W\ \CQ-RX105W\

Remote Control Unit (includes a battery)

(EUR7641010)

Removable Face Plate Case

(YGFA134302)

Notes:

• The number in parentheses underneath each accessory part name is the part number for maintenance and service.

• Accessories and their part numbers are subject to modiﬁ cation without prior notice due to improvements.

• Mounting Collar and Trim Plate are mounted on the main unit at shipment.

Instruction kit \CQ-RX300W\ \CQ-RX200W\

Q’ty

Operating Instructions

(English: YGFM286063) (Pуccкий: YGFM286062) (ʑᄽ: YGFM286064) (한국어: YGFM286065)

1 set

System Upgrade Guidebook

(YGFM262852)

Installation Instructions

(YGFM294420)

Accessories

Installation kit (YEP0FZ5698)

Q’ty

Lock Cancel Plate

1 set

Mounting Bolt (5 mm )

Rubber Bushing

(CQ-RX300W)

English

Instruction kit \CQ-RX105W\

Q’ty

Operating Instructions

(English: YGFM286063) (ʑᄽ: YGFM286064) (한국어: YGFM286065)

1 set

Installation Instructions

(YGFM294420)

Instruction kit \CQ-RX102W\ \CQ-RX101W\

Q’ty

Operating Instructions

(English: YGFM286063) (Pуccкий: YGFM286062) (ʑᄽ: YGFM286064)

1 set

Installation Instructions

(YGFM294420)

XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXX XXXXXXXXXXXXXXXX

OO-OOOOO

- 1 -

Safety Information

Q Read the operating instructions for the unit and all other

components of your car audio system carefully before using the system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual.

Warning

This pictograph intends to alert you to the presence of important operating instructions and installation instructions. Failure to heed the instructions may result in severe injury or death.

Q This manual uses pictographs to show you how to use the product

safely and to alert you to potential dangers resulting from improper connections and operations. The meanings of the pictographs are explained below. It is important that you fully understand the meanings of the pictographs in order to use this manual and the system properly.

Caution

This pictograph intends to alert you to the presence of important operating instructions and installation instructions. Failure to heed the instructions may result in injury or material damage.

Warning

Observe the following warnings when using this unit.

R The driver should neither watch the display nor operate

the system while driving.

Watching the display or operating the system will distract the driver from looking ahead of the vehicle and can cause accidents. Always stop the vehicle in a safe location and use the parking brake before watching the display or operating the system.

R Use the proper power supply.

This product is designed for operation with a negative grounded 12 V DC battery system. Never operate this product with other battery systems, especially a 24 V DC battery system.

R Keep batteries and insulation ﬁ lm out of reach of infants.

Batteries and insulation ﬁ lm can be ingested, so keep them out of the reach of infants. If an infant ingests a battery or insulation ﬁ lm, please seek immediate medical attention.

R Protect the Deck Mechanism.

Do not insert any foreign objects into the slot of this unit.

R Do not disassemble or modify the unit.

Do not disassemble, modify the unit or attempt to repair the product yourself. If the product needs to be repaired, consult your dealer or an authorized Panasonic Service Center.

R Do not use the unit when it is out of order.

If the unit is out of order (no power, no sound) or in an abnormal state (has foreign objects in it, is exposed to water, is smoking, or smells), turn it off immediately and consult your dealer.

R The remote control unit should not lie about in the car.

If the remote control unit lies about, it could fall on the ﬂ oor while driving, get wedged under the brake pedal, and lead to a trafﬁ c accident.

R Refer fuse replacement to qualiﬁ ed service personnel.

When the fuse blows out, eliminate the cause and have it replaced with the fuse prescribed for this unit by a qualiﬁ ed service engineer. Incorrect replacement of the fuse may lead to smoke, ﬁ re, and damage to the product.

Observe the following warnings when installing.

R Disconnect the lead from the negative (–) battery

terminal before installation.

Wiring and installation with the negative (–) battery terminal connected may cause electrical shock and injury due to a short circuit. Some cars equipped with the electrical safety system have speciﬁ c procedures of battery terminal disconnection.

FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL INJURY OR DEATH.

R Never use safety-related components for installation,

grounding, and other such functions.

Do not use safety-related vehicle components (fuel tank, brake, suspension, steering wheel, pedals, airbag, etc.) for wiring or ﬁ xing the product or its accessories.

R Installing the product on the air bag cover or in a location

where it interferes with airbag operation is prohibited.

R Check for piping, gasoline tank, electric wiring, and

other items before installing the product.

If you need to open a hole in the vehicle chassis to attach or wire the product, ﬁ rst check where the wire harness, gasoline tank, and electric wiring are located. Then open the hole from outside if possible.

R Never install the product in a location where it interferes

with your ﬁ eld of vision.

R Never have the power cord branched to supply other

equipment with power.

R After installation and wiring, you should check the

normal operation of other electrical equipment.

The continuation of their using in abnormal conditions may cause ﬁ re, electrical shock or a trafﬁ c accident.

R In the case of installation to an airbag-equipping

car, conﬁ rm warnings and cautions of the vehicle manufacturer before installation.

R Make sure the leads do not interfere with driving or

getting in and out of the vehicle.

R Insulate all exposed wires to prevent short circuiting.

- 2 -

Caution

THIS PRODUCT IS A CLASS I LASER PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

- 3 -

Expansion Module (Hub Unit)

\CQ-RX300W\ \CQ-RX200W\

Connection of the Expansion Module (hub unit, CY-EM100N) allows users to connect up to 4 optional devices shown below.

Wide Array of Components for System Upgrade

\CQ-RX300W\ \CQ-RX200W\

Various optional components allow users to obtain availability of wide range of system upgrade. Upgrading the system delivers relaxed AV space in a car. For further information, refer to the separate System

Upgrade Guidebook.

•

iPod

The optional adaptor (Direct Cable for iPod: CA-DC300N) allows you to connect the optional iPod series. iPod is a trademark of Apple Inc., registered in the U.S. and other countries.

• CD Changer

The optional adaptor (Conversion Cable for DVD/CD Changer: CA-CC30N) allows you to connect the optional Panasonic CD changer unit (CX-DP880N).

• Bluetooth

Using the optional Bluetooth Unit (CY-BT200N) and a Bluetooth device enables hands-free telephony and Bluetooth Audio listening with this unit.

Note: This unit does not support CY-BT100N.

Bluetooth

The Bluetooth word mark and logo are owned by the Bluetooth SIG,

Inc. and any use of such marks by Matsushita Electric Industrial Co., Ltd. is under license. Other trademarks and trade name are those of their respective owners.

Features

SQ (Sound Quality)

You have 6 preset modes (FLAT, ROCK, POP, VOCAL, JAZZ, CLUB). You can customize your settings for these and save them for instant recall.

SQ3 (3-Band Sound Quality)

Center frequency and level are adjustable in each of 3 bands. This lets you ﬁ ne-tune sound quality for each genre to suit car-interior acoustics and your personal preferences. (

« “Sound Control”)

USB Connector

\CQ-RX300W\

The USB Connector is equipped on the front panel.

(

« System Upgrade Guidebook)

By connecting a USB memory (not included) to USB connector via a USB extension cable (USB 2.0, not included), you can enjoy MP3/ WMA/AAC ﬁ les stored on the USB memory (not included) in your car.

AUX (AUX1) Input Terminal

The AUX input terminal is equipped on the front panel. Your mobile audio player and other devices are connectable to this unit without any difﬁ culty.

- 4 -

Before Reading These Instructions

Panasonic welcomes you to our constantly growing family of electronic products owners. We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability we have built into it, you too will be proud to be a member of our family.

\CQ-RX300W\ \CQ-RX200W\

The instruction manual consists of 2 books. One is “Operating Instructions” describing the operations of the main unit. The other is “System Upgrade Guidebook” describing the optional devices such as CD changer.

Differences Among 5 Models

This operating instruction manual is for 5 models CQ-RX300W, CQ-RX200W, CQ-RX105W, CQ-RX102W and CQ-RX101W. All illustrations throughout this manual represent model CQ-RX300W unless otherwise speciﬁ ed. The following table describes the differences among 5 models.

Models

Features

CQ-RX300W CQ-RX200W CQ-RX105W CQ-RX102W CQ-RX101W

Remote Control Unit Included Not included Included Not included Not included System Upgrade

Guidebook

Included Included Not included Not included Not included

System-up Connector Supported Supported Not Supported Not Supported Not Supported Preamp Out Connector 2 (Front/Rear) 1 (Rear) 1 (Rear) 1 (Rear) 1 (Rear) USB Connector Supported Not Supported Not Supported Not Supported Not Supported AAC playback Supported Not Supported Not Supported Not Supported Not Supported Button logo color Green Green Green Green Red

- 5 -

Maintenance/Fuse

Your product is designed and manufactured to ensure the minimum of maintenance. Use a dry, soft cloth for routine exterior cleaning. Never use benzine, thinner, or other solvents.

If the fuse blows out, consult your dealer, or your nearest authorized Panasonic Service Center.

Anti-Theft System

This unit is equipped with a removable face plate. Removing this face plate makes the unit totally inoperable.

Cleaning

the Unit

Fuse

Notes:

• Do not touch the contacts on the face plate and the main unit, since this may result in poor electrical contact.

• If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.

Face Plate Removing/Mounting

(Anti-Theft System)

Warning

• Use fuses of the same speciﬁ ed rating (15 A). Using substitutes or fuses with higher ratings, or connecting the unit

directly without a fuse could cause ﬁ re or damage to the unit. If the replaced fuse fails, contact your nearest

authorized Panasonic Service Center.

Removing

Turn off the power.

Press []. The face plate will open.

Pull it out toward you.

Put the face plate in the case.

Mounting

Slide the left side of the face plate in place.

Press the right end of face plate until a “click” is heard.

- 6 -

YGFM286063A FT1007-1117 Printed in China

Matsushita Electric Industrial Co., Ltd.

Web Site: http://panasonic.net

Speciﬁ cations

General

Power supply : DC 12 V (11 V – 16 V DC), test

voltage 14.4 V, negative ground Current consumption : Less than 2.1 A (CD mode; 0.5 W x 4 channels) Maximum power output : 50 W x 4 channels (at 1 kHz) volume control maximum Power output : 18 W x 4 CH (1 kHz, 1 %, 4 j) Tone/SQ adjustment range : SQ Low/Bass: ±12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz) SQ Mid: ±12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz) SQ High/Treble: ±12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz) Speaker impedance : 4 – 8 j Pre-amp output voltage : 2.0 V (CD mode, 1 kHz, 0 dB) Pre-amp output impedance : 200 j

USB Connector \CQ-RX300W\

USB Standard Compatibility

: 1.1/2.0 Full Speed Maximum Supply Current : 500 mA Front AUX input Input impedance : 10 kj Allowable external input : 2.0 V Connector : 3.5 mm  Stereo mini-pin Dimensions (W x H x D) : 178 x 50 x 160 mm Weight : 1.2 kg

Disc Player

Sampling frequency : 8 times oversampling DA converter : 1 bit DAC System Pick-up type : Astigma 3-beam Light source : Semiconductor laser Wave length : 790 nm Frequency response : 20 Hz – 20 kHz (±1 dB) Signal to noise ratio : 96 dB Total harmonic distortion : 0.01 % (1 kHz) Wow and ﬂ utter : Below measurable limits Channel separation : 85 dB

FM Radio

Frequency range : 87.50 MHz – 108.00 MHz Usable sensitivity : 6 dB/μV (S/N 30 dB) Frequency response : 30 Hz – 15 kHz (±3 dB) Alternate channel selectivity : 75 dB Stereo separation : 35 dB (at 1 kHz) Image rejection ratio : 70 dB IF rejection ratio : 100 dB Signal/noise ratio : 62 dB

AM Radio

Frequency range : 531 kHz – 1 602 kHz Usable sensitivity : 28 dB/μV (S/N 20 dB)

Notes:

• Speciﬁ cations and design are subject to modiﬁ cation without notice due to improvements.

• Some ﬁ gures and illustrations in this manual may be different from your product.

Notes:

• Remote Control Unit for CQ-RX200W/CQ-RX102W/CQ-RX101W is option (CA-RC80N).

• The optional remote control is available from your local dealer. (CA-RC80N)

Power Mode (Source)

Tun e Track selection Fast forward/fast reverse

(CA-RC80N)

Mute/attenuation

Volume

Band Pause

- 7 -

Caution

Observe the following cautions when using this unit.

R Keep the sound volume at an appropriate level.

Keep the volume level low enough to be aware of road and trafﬁ c conditions while driving.

R This unit is designed for use exclusively in automobiles. R Do not operate the unit for a prolonged period with the

engine turned off.

Operating the audio system for a long period of time with the engine turned off will drain the battery.

R Do not expose the unit to direct sunlight or excessive

heat.

Otherwise these will raise the interior temperature of the unit, and it may lead to smoke, ﬁ re, or other damage to the unit.

R Do not use the product where it is exposed to water,

moisture, or dust.

Exposure of the unit to water, moisture, or dust may lead to smoke, ﬁ re, or other damage to the unit. Make especially sure that the unit does not get wet in car washes or on rainy days.

R Set the volume level to low enough before the AUX

connection is completed.

Failure to observe this, the loud noise may come out and damage your speakers and your hearing. Direct connection of the speaker/ headphone output of an external device without any attenuator may distort sound or damage the connected external device.

Observe the following cautions when installing.

R Refer wiring and installation to qualiﬁ ed service

personnel.

Installation of this unit requires special skills and experience. For maximum safety, have it installed by your dealer. Panasonic is not liable for any problems resulting from your own installation of the unit.

R Follow the instructions to install and wire the product.

Not following the instructions to properly install and wire the product could cause an accident or ﬁ re.

R Take care not to damage the leads.

When wiring, take care not to damage the leads. Prevent them from getting caught in the vehicle chassis, screws, and moving parts such as seat rails. Do not scratch, pull, bend or twist the leads. Do not run them near heat sources or place heavy objects on them. If leads must be run over sharp metal edges, protect the leads by winding them with vinyl tape or similar protection.

R Use the designated parts and tools for installation.

Use the supplied or designated parts and appropriate tools to install the product. The use of parts other than those supplied or designated may result in internal damage to the unit. Faulty installation may lead to an accident, a malfunction or ﬁ re.

R Do not block the air vent or the cooling plate of the unit.

Blocking these parts will cause the interior of the unit to overheat and will result in ﬁ re or other damage.

R Do not install the product where it is exposed to strong

vibrations or is unstable.

Avoid slanted or strongly curved surfaces for installation. If the installation is not stable, the unit may fall down while driving and this can lead to an accident or injury.

R Installation Angle

The product should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30˚. The user should bear in mind that in some areas there may be restrictions on how and where this unit must be installed. Consult your dealer for further details.

R Wear gloves for safety. Make sure that wiring is

completed before installation.

R To prevent damage to the unit, do not connect the power

connector until the whole wiring is completed.

R Do not connect more than one speaker to one set of

speaker leads. (except for connecting to a tweeter)

Observe the following cautions when handling the battery for the remote control unit.

\CQ-RX300W\ \CQ-RX105W\

• Use only speciﬁ ed battery (CR2025).

• Match the polarity of the battery with the (+) and (–) marks in the battery case.

• Replace a dead battery as soon as possible.

• Remove the battery from the remote control unit when not using it for an extended period of time.

• Insulate the battery (by placing them in a plastic bag or covering them with vinyl tape) before disposal or storage.

• Dispose of the battery according to the local regulations.

• Do not disassemble, recharge, heat or short the battery. Do not throw a battery into a ﬁ re or water.

In case of battery leakage

• Thoroughly wipe the battery liquid off the battery case and insert new battery.

• If any part of your body or clothing comes into contact with battery liquid, wash it with plenty of water.

• If battery liquid comes into contact with your eyes, wash them with plenty of water and get immediate medical attention.

Observe the following cautions when using USB device.

\CQ-RX300W\

• Do not connect a USB device directly to this unit. If the USB device is connected directly to this unit and an accident occurs, or if the brakes are applied suddenly, the driver or passenger may bump into the USB device and may get injured.

• Position the USB device and USB extension cable so that they do not obstruct your driving.

• Do not connect any USB device other than USB memory or a USB audio player. Do not connect multiple USB devices to the USB connector. Drawing power for multiple USB devices from the connector could cause overheating and smoking.

- 8 -

+ 16 hidden pages