Panasonic AG-MDC10 Reference Guide

Full HD 3MOS Camera & Recording system

POVCAM （AG-MDC10, AG-MDR15） Quick Reference Guide

Recording with AG-MDC10 Camera

Connecting Camera to the Recorder

Insert the SD Memory Card into the card slot and close the door.

Note : POVCAM supports up to 32GB SDHC card.

Preparation #2

Note : Watch the angle of connector which has a key slot.

Connect the AG-MDC10 Camera with AG-C20003 (3m) or AG-C20020 (20m) Cable.

Note : Connect camera before turning the power. AG-MDR15 needs to detect camera

connection to select the camera input.

Connecting monitor via HDMI cable or HD-SDI output

HDMI connection

(HDMI cable)

Note : Menu setting must be as follows ;

When using HDMI connection, MENU > AV OUT SETUP > SDI OUT > OFF When using HD-SDI connection, MENU > AV OUT SETUP > SDI OUT > ON

Preparation #4

Turn the power on !

Press the POWER button for 2 seconds or longer. The POWER lamp (green) illuminates and the power turns on.

HD-SDI connection

(BNC cable)

Note : For turning the power off, press the POWER button

for 2 seconds or longer when the power is on. The POWER lamp flashes, the power turns off, and then the lamp goes off.

Monitor

+ 6 hidden pages