Pace DC50XU Operator Guide

DC50Xu

Digital Transport Adapter

Quick Start Guide

BRINGING TECHNOLOGY HOME

www.pace.com

IMPORTANT SAFETY INSTRUCTIONS

Before you install or use the apparatus, you must read and understand these
Important Safety Instructions. At all times when using the apparatus you must
follow these Important Safety Instructions to reduce the risk of fire, electrical
shock and injury to persons.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when
unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.

504-3339503

INSTRUCTIONS IMPORTANTES SUR LA SÉCURITÉ

Avant d’installer et d’utiliser cet appareil, il est important de lire et de comprendre
les instructions concernant la sécurité. Ces instructions doivent en tout temps être
observées lors de l’utilisation de l’appareil afin de réduire les risques d’incendie, de
choc électrique et de blessures.

1. Lire les instructions.

2. Conserver les instructions.

3. Observer tous les avertissements.

4. Observer toutes les instructions.

5. Ne pas utiliser cet appareil près de l’eau.

6. Nettoyer uniquement avec un chiffon sec.

7. Ne pas obstruer les ouvertures d’aération de l’appareil. Installer l’appareil
suivant les recommandations du fabricant.

8. Ne pas installer l’appareil à proximité d’une source de chaleur telle que
radiateur, registre de chaleur, cuisinière ou autre appareil produisant de la
chaleur (y compris les amplificateurs).

9. Ne pas contourner le dispositif de sécurité de la fiche polarisée ou de la fiche avec
mise à la terre. Une fiche polarisée est pourvue de deux broches; l’une étant plus
large que l’autre. Une fiche avec mise à la terre est pourvue de deux lames et d’une
broche de mise à la terre. La broche plus large et la troisième broche sont destinées
à assurer la sécurité. Si la fiche de l’appareil ne convient pas à la prise électrique
murale, s’adresser à un électricien pour faire remplacer la prise murale.

10. S’assurer que le cordon d’alimentation ne sera ni piétiné ni écrasé, particulièrement au
niveau de la fiche, de la prise électrique ainsi qu’au point de sortie du fil de l’appareil.

11. Utiliser uniquement les fixations et accessoires recommandés par le fabricant.

12. Utiliser uniquement l’appareil avec un chariot, un pied, un trépied, une table ou un
support recommandé par le fabricant, ou vendu avec l’appareil. Lors de l’utilisation
d’un chariot, faire preuve de prudence pour transporter l’unité chariot/appareil afin
de ne pas la faire basculer.

13. Débrancher l’appareil pendant les orages électriques ou lorsque
l’appareil n’est pas utilize pendant une longue période.

14. Confier toute réparation à du personnel d’entretien compétent.
Un entretien est essentiel dans les cas suivants : la fiche ou
le cordon d’alimentation sont endommagés; du liquide a été
renversé ou des objets sont tombés dans l’appareil; l’appareil a été exposé à la
pluie ou à l’humidité; l’appareil ne fonctionne pas adéquatement ou il est tombé.

SAFETY
INFORMATION

To ensure you use this product safely,
please read all the safety information
included in this document.

This digital adapter has been manufactured
and tested with your safety in mind. However,
improper use can result in potential electric
shock or fire hazards. To avoid defeating
the safeguards that have been built into
your digital adapter, please observe the
precautions discussed in this document.

The model number, serial number and
electrical rating of your digital adapter are on
a label on its base.

Warnings

• Do not remove the cover of your
digital adapter. There are no user­serviceable parts inside it.

• Do not perform any servicing
unless you are qualified to do
so by Pace. Refer all servicing
to qualified service personnel.
Servicing the digital adapter
yourself will invalidate the
warranty.

• On the rear panel of your digital
adapter there is a tamper-evident
label that states “Warranty void if
broken or removed”.

• To reduce the risk of fire or
electric shock, do not expose
your digital adapter to rain or
moisture.

OTHER WARNINGS

Risk of fire or scorching

Never place naked flame sources, such as
lighted candles, on or adjacent to your digital
adapter.

Ambient temperature

The operating temperature range of your
digital adapter is 32-104°F. If the ambient
temperature around your digital adapter
falls outside this range, you must correct
this in order for your digital adapter to work
correctly and safely. For example, if the
temperature is too high, switch on the air
conditioning.

Ventilation

Slots and openings in the casing of your
digital adapter are provided for ventilation,
to ensure reliable operation of your digital
adapter and to protect it from overheating.

• Never block the ventilation openings by
placing your digital adapter on a bed,
sofa, rug or other similar surface.

• Never cover the ventilation openings with
items such as newspapers, table-cloths
or curtains.

CAUTION

Do not attempt to modify your digital
adapter without written authorization
from the manufacturer. Unauthorized
modification could void your authority
to operate your digital adapter.

SAVE THIS INFORMATION FOR FUTURE
REFERENCE

REGULATORY
INFORMATION

NOTE

Your digital adapter has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
installation. Your digital adapter
generates, uses and can radiate radio­frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications.

However, there is no guarantee that
interference will not occur in a particular
installation. If your digital adapter does
cause harmful interference to radio
or television reception, which can be
determined by turning your digital adapter
off and on, you are encouraged to try to
correct the interference by one or more of
the following measures:

• Reorient or relocate the receiving
antenna.

• Increase the separation between your
digital adapter and the receiver.

• Connect your digital adapter to an
outlet on a circuit different from that to
which the receiver is connected.

• Consult your dealer or an experienced
radio/TV technician for help.

CONNECTING TO THE
AC POWER SUPPLY

You must not plug your digital adapter into
the power supply until you have connected
your digital adapter to the other equipment in
your system.

Your digital adapter itself is designed for use
only with the supplied power supply unit.

On the power supply unit there is a label that
specifies the correct AC power supply input
for it. Do not connect the power supply unit
to any supply other than this.

Always connect the 5 volt DC cord from the
power supply unit to your digital adapter
before you insert the power supply unit into
the wall AC outlet.

To disconnect power from your digital
adapter, always remove the power supply unit
from the wall AC outlet (i.e. not by removing
the 5 volt cord from your digital adapter).

Therefore you must install your digital
adapter near to the wall AC outlet, which
should be easily accessible.

If you are in any doubt about the
power supply lead, its plug or its
connection, consult a qualified
electrician.