Orion RCD-832 Instruction Manual

PORTABLE RADIO WITH CD/MP3 PLAYER

INSTRUCTION MANUAL

FEATURES AND CONTROLS

15

1314

16

12

11

17

1

2

3

S

E

L

E

C

T

4

5
6

7

8

9

10

22

232418

21

20

19

18

25

26

27

To achieve the utmost in enjoyment and perfor mance, please read this manual carefully before
attempting to operate the unit in order to became familiar with its features, and assure you years
of faithful, trouble free performance and listening pleasure.

Important Notes

* Keep safety and operating instructions in a safe place for future reference.
* Avoid installing the unit in locations described below:

Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.
On top of other stereo equipment that radiate too much heat.
Places locking ventilation or dusty places.
Places subject to constant vibration.
Humid or moist places.

* Make sure not to obstruct the ventilation opening.

Operate turning controls and switches as instructed in the manual.

* Before turning on the power for the first time, make certain the power cord is

properly installed.

* Store your tapes or CD in a cool area to avoid damage from heat.
For safety reasons, do not remove any covers or attempt to gain access to the inside of

the product. Refer any servicing to qualified personnel.
Do not attempt to remove any screws, or open the casing of the unit; there are no user

serviceable parts inside, refer all servicing to qualified service personnel.

CAUTION

RISK OF ELECTRIC SHOCKRISK OF ELECTRIC SHOCK

RISK OF ELECTRIC SHOCK

RISK OF ELECTRIC SHOCKRISK OF ELECTRIC SHOCK

DO NOT OPENDO NOT OPEN

DO NOT OPEN

DO NOT OPENDO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK),

NO USER SERVICEABLE PA RTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

DANGEROUS VOLTAGE

Conductor dangerous voltage, that may be of sufficient magnitude to constitute a risk of
electric shock to persons is present within this product’s enclosure.

ATTENTION

The owner’s manual contains important operating and maintenance instructions, for your
safety, it is necessary to refer to the manual.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO DRIPPING OR SPLASHING.

Note:

This unit will become warm when used for a long period of time. This is normal and does
not indicate a problem with the unit.
This CD player includes micro-processors which may malfunction as a result of external
electrical interference or noise. If the CD player is not working properly, disconnect the
power source and then reconnect it.

UK - 1

FEATURES AND CONTROLS

1. ANTENNA

2. HANDLE

3. CD STOP BUTTON

4. REPEAT BUTTON

5. SKIP/SEARCH UP BUTTON

6. CD PLAY/PAUSE BUTTON

7. PROGRAM BUTTON

8. SKIP/SEARCH DOWN BUTTON

9. RANDOM BUTTON

10. UNIT BUTTON

11. TEN BUTTON

12. HUNDRED BUTTON

13. CD DOOR OPEN BUTTON

14. CD DOOR

15. POWER LED INDICATOR

16. DIAL SCALE

17. FM STEREO LED INDICATOR

18. SPEAKER

19. TUNING KNOB

20. AM/FM/FM STEREO (BAND SELECTOR)

21. LCD DISPLAY (CD/MP3 FUNCTION)

22. CD MP3/OFF/RADIO (FUNCTION SWITCH)

23. PHONES JACK

24. VOLUME KNOB

25. AC CORD

26. BATTERY DOOR

27. AC/DC SWITCH

OPERATING THE UNIT

1. Press down the compartment cover, and slide the cover off to open the compartment, take out
the power cord from inside and connect it to the AC power or place 8 batteries of 1.5V in it;
and the AC/DC switch should push to the corresponding position (push to the AC position
as connect it to the AC power, or push to the DC position when you should place the
batteries).

2. When push the function switch CD/MP3//OFF//RADIO to OFF position the unit will be on
standby mode, meanwhile the indicator of POWER is off. When push the switch to the CD/
MP3 position, the unit will be switched on, and you can appreciate MP3 or listen to CD,
meanwhile the LED indicator will light on. To RADIO position you can receive the broadcast
with AM or FM band and the POWER indicator is lighting.

RADIO OPERATION

Set the function switch CD/MP3//OFF//RADIO to RADIO position.

FM

Select the FM or FM STEREO by BAND SELECTOR switch. Tur n the TUNING knob to select the
require station. The FM stereo LED indicator will light on when a stereo broadcast is being
received. Fully extend the FM antenna and adjust its direction for best FM reception.

AM

Select AM by BAND SELECTOR switch. Tur n the TUNING knob to select the require station. For
operation on AM the set contains a built-in ferrite aerial which is directional. Therefore, the set
should be positioned for the best signal strength.

FM Antenna

FM antenna wire for better FM reception.

UK - 2