Onkyo TXRZ-710 Owners Manual

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

Basic Manual

Hookup

Step1: Choose your Speaker Layout .......................................3

Step2: Connect the Speakers ..................................................9

Step3: Connect the TV ..........................................................11

Step4: Connect the AV Components .....................................13

Step5: Multi-zone Connection ...............................................16

Step6: Connect Other Cables ................................................19

Setup

Step7: Power On & Initial Setup ............................................20

HDMI Setup ...........................................................................21

Playback

Basic Playback ......................................................................22

Network Functions .................................................................23

Others ....................................................................................25

Part Names

Front Panel ............................................................................27

Rear Panel ............................................................................28

Remote Controller .................................................................29

Display ...................................................................................29

AV RECEIVER

TX-RZ710

The Basic Manual includes information needed when starting up and

also instructions for frequently used operations. The Advanced Manual has more detailed information and advanced settings.

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

(For North American, European and Asian models)

Troubleshooting | Appendix

What's in the box

1. Main unit 2. Remote controller (RC-911R) ×1, Batteries (AAA/R03) ×2

3. Indoor FM antenna ×1 4. AM loop antenna ×1 5. Speaker setup microphone ×1

6. Power cord ×1

Main features

This unit is connected between your TV and your AV components. To play, select the source with the input selector. You can connect 7.1ch of speakers to this unit, with 7ch at 180 W (6 ohms, 1 kHz, 0.9%THD) (North American models) / 175 W (6 ohms, 1 kHz, 1%THD) (European, Australian and Asian models) per channel plus pre out jack for powered subwoofer.

Conforms to the THX Select2 Plus specification: THX is a series of specifications for the accurate reproduction of movies propounded by the film director George Lucas. This unit is equipped with a variety of THX technology to faithfully reproduce according to the sound design envisaged by the movie producer, including surround modes that take account of factors such as the size and number of speakers, and the differences in environments between home theaters and movie theaters.

Supports playback in Dolby Atmos format which provides 360e sound placement

The HDMI jack supports 4K video input and output. Jacks IN1 to 3 and OUT MAIN/SUB support HDCP2.2

HDMI CEC functionality: Control features such as linking input switching with the input selector and players

conforming to the CEC standard, switching audio output and volume using the remote controller of a CECcompliant TV, and automatically switching this unit to standby when the TV is turned off

HDMI Standby Through: Video and audio signals from AV components can be transmitted to the TV even if this unit is in standby

ARC: Connection with an ARC-compat ble TV is complete with one HDMI cable

Easy Initial Setup using onscreen guidance and On-Screen Display (OSD) showing operations on the TV

Internet radio and AirPlay via wired LAN or Wi-Fi (wireless LAN) and network features such as Music Server that enables PC music file playback, USB playback, plus other playback features such as AM/FM radio and BLUETOOTH

Playback formats supported by Music Server and USB include WAV, FLAC and DSD high-res source

Multi-zone Connection which allows you to play in the main room and listen in a separate room (ZONE 2)

Equipped with RS232 port, IR IN jack, and 12V TRIGGER OUT jack

We plan to provide support for the DTS:X audio format through a firmware update for this unit. Refer to our website for more information.

play

CAUTION:

ZONE 2B (North American models) ( 16 Ω impedance. The power cord must be connected only after all other cable connections are completed.

0 We will not accept responsibility for damage arising from the connection of equipment manufactured by

Connect speakers with 6 Ω to 16 Ω impedance. When connecting speakers to both ZONE 2A and

other companies.



P18), both sets of speakers connected in ZONE 2 should have 8 Ω to

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual



Troubleshooting | Appendix

Step1: Choose your Speaker Layout

For 5.1-Channel System

This is a 5.1-channel system that is the basic surround system. Front speakers output front stereo sound and a center speaker outputs center sound such as dialogs and vocals. Surround speakers create back sound field. Powered subwoofer reproduces bass sounds and creates rich sound field. The front speakers should be positioned at ear height, while the surround speakers should be positioned just above ear height. Center speaker should be set up facing the listening position. Place the powered subwoofer towards the front. Placing it between the center speaker and a front speaker gives you a natural sound even when playing music.

0 The front speakers, center speaker, and surround

speakers are counted as 5 channels, and the powered subwoofer is counted as 0.1 of a channel, giving us the name 5.1ch system.

＊

12 3 45 6

Front Speakers Center Speaker Surround Speakers Powered Subwoofer

＊ 1: 22e to 30e, ＊ 2: 120e

o To "Hookup" (



P9)

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual



Troubleshooting | Appendix

For 7.1-Channel System (with Surround Back Speakers)

This is a system with surround back speakers added to the basic 5.1-channel system. The connection of surround back speakers improves the sense of envelopment and connectivity of sound created by the back sound field and provides a more real sound field. You can select the Dolby Atmos listening mode, which realizes the most up-to-date 3D surround sound, when the input format is Do by Atmos. With formats other than Do by Atmos, you can still create a sound field by outputting sound from the surround back speakers when you select the Dolby Surround listening mode. The optimal positioning is for surround back speakers to be at ear height. Place the surround speakers in a more slightly forward position than you would in a 5.1-channel system.

0 If you are including surround back speakers in the

setup, surround speakers are required.

＊

(P3)

Surround Back Speakers

＊ 1: 22e to 30e, ＊ 2: 90e to 110e, ＊ 3: 135e to 150e

Go To "Hookup" (P9)

＊

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

3´ (0.9 m) or more



Troubleshooting | Appendix

For 7.1-Channel System (with Height Speakers-A)

Front High or Rear High speakers

This is a basic 5.1-channel system with the addition of height speakers, either as front high speakers or rear high speakers. Select which speakers to setup according to the environment of the room. You can select the Dolby Atmos listening mode (5.1.2 channel playback), which realizes the most up-to-date 3D surround sound including overhead sounds, when the input format is Dolby Atmos. With formats other than Dolby Atmos, you can still create a sound field by outputting sound from the height speakers when you select the Do by Surround listening mode. Front high speakers or rear high speakers should be situated at least 0.9 m higher than the front speakers. Front high speakers should be situated directly above the front speakers and the distance between the rear high speakers should match the distance between the front speakers. Both should be set up facing the listening position.

＊

(P3)

Height Speakers

Choose one of the following:

Front High Speakers

Rear High Speakers

＊ 1: 22e to 30e, ＊ 2: 120e

Go To "Hookup" (P9)

＊

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

＊



Troubleshooting | Appendix

For 7.1-Channel System (with Height Speakers-B)

Ceiling speakers

This is a basic 5.1-channel system using ceiling speakers, for example, with the addition of height speakers, either as top front speakers, top middle speakers, or top rear speakers. Select which speakers to setup according to the environment of the room. You can select the Dolby Atmos listening mode (5.1.2 channel playback), which realizes the most up-to-date 3D surround sound including overhead sounds, when the input format is Dolby Atmos. With formats other than Dolby Atmos, you can still create a sound field by outputting sound from the height speakers when you select the Do by Surround listening mode. Fit top front speakers on the ceiling forward of the seating position, top middle speakers on the ceiling directly above the seating position, and top rear speakers on the ceiling behind the seating position. The distance between each pair should match the distance between the two front speakers.

0 Dolby Laboratories recommends placing this type of

height speakers to obtain the best Dolby Atmos effect.

(P3)

Height Speakers

Choose one of the following:

Top Front Speakers

Top Middle Speakers

Top Rear Speakers

＊ 1: 30e to 55e, ＊ 2: 65e to 100e, ＊ 3: 125e to 150e

Go To "Hookup" (P9)

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual



Troubleshooting | Appendix

For 7.1-Channel System (with Height Speakers-C)

Dolby enabled speakers

This is a basic 5.1-channel system using Dolby enabled speakers, with the addition of height speakers, either as Dolby enabled speakers (front) or Dolby enabled speakers (surround). Select which speakers to setup according to the environment of the room. Dolby enabled speakers are special speakers designed to face the ceiling so that sound is heard after bouncing off the ceiling so that sound appears to be coming from overhead. You can select the Dolby Atmos listening mode (5.1.2 channel playback), which realizes the most up-todate 3D surround sound including overhead sounds, when the input format is Dolby Atmos. With formats other than Dolby Atmos, you can still create a sound field by outputting sound from the height speakers when you select the Do by Surround listening mode. Place them either above the front speakers or above the surround speakers.

＊

(P3)

Height Speakers

＊

Choose one of the following:

Dolby Enabled Speakers (Front)

Dolby Enabled Speakers (Surround)

Go To "Hookup" (P9)

＊ 1: 22e to 30e, ＊ 2: 120e

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual



Troubleshooting | Appendix

For Bi-Amping the Speakers

It is possible to connect front speakers supporting BiAmping to improve quality of the bass and treble. The maximum number of channels available with this connection is 5.1 because Bi-Amping speakers require one amplifier for the tweeter jacks and one amplifier for the woofer jacks. The effects and placements for speakers are the same as the 5.1-channel plan that doesn't use Bi-Amping speakers.

0 You cannot output to ZONE 2 SPEAKER (

speakers have been connected for Bi-Amping.

＊



P18) if the

＊ 1: 22e to 30e, ＊ 2: 120e

12 3 45 6

Front Speakers (Bi-Amping) Center Speaker Surround Speakers Powered Subwoofer

Go To "Hookup" (P10)

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

Step2: Connect the Speakers

in case of: Pages 3 to 7

Connect 123456 for a 5.1-channel system. For a

7.1-channel system, select either surround back speakers or height speakers, and connect 78. Up to two powered subwoofers can be connected. The same signal is output from each of the SUBWOOFER jacks.

Setup

1/2˝

(12 mm)

0 The speaker configuration is set to

12345678 audio output by default. If there are speakers you won't be connecting, you need to change the settings in Initial Setup, "1. AccuEQ Room Cal bration" ( those speakers you are not connecting is sent to other speakers. Note that if you are using height speakers, set "Speaker Channels" to "5.1.2 ch" in the setting screen.



P20) so that the audio from

1 Speaker cable, 2 Subwoofer cable

Make sure he exposed wires of he speakers do not stick out of the speaker terminals when connecting. If the exposed wires of the speakers touch the rear panel or the + and – wires touch each other, the protection circuit will be activated.

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

For highfrequency

For lowfrequency

Troubleshooting | Appendix

in case of: Page 8

Connect front speakers compatible with Bi-Amping connection to the FRONT jacks and the SURROUND BACK or HEIGHT jacks. Make sure you remove the jumper bar fitted between the woofer jacks and tweeter jacks of the front speakers. In case of Bi-Amping connection, refer to the instruction manual of your

1/2˝

(12 mm)

speakers. Up to two powered subwoofers can be connected. The same signal is output from each of the SUBWOOFER jacks.

Setup

0 Bi-Amping connection requires you to change some settings. Select "Yes" in "Bi-Amp" in "1. AccuEQ Room Calibration" ( Setup.



P20) in the Initial

1 Speaker cable, 2 Subwoofer cable

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

Step3: Connect the TV

if you have: ARC TV

This unit is connected between your TV and AV components. If you connect two or more AV components, you can select the video displayed on the TV and the audio output from this unit by changing the input selector. Shown here are the connections for a TV that supports the ARC (Audio Return Channel) feature. By connecting with a single HDMI cable, you can not only output the video input to this unit to the TV, but you can also play the sound from the TV through this unit. Choose an HDMI IN jack on the TV that supports ARC when connecting.

Setup

0 Settings are required to use the ARC function. Select "Yes" in "5. Audio Return Channel" ( in the Initial Setup. 0 Please refer to the TV's operation manual for directions on connections and setup for the TV.



P21)

HDMI IN (ARC)

1 HDMI cable

Another TV or projector can be connected to the HDMI OUT SUB jack. This jack does not support ARC. For details about how to output video from the HDMI OUT SUB jack (P22)

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

if you have: Non-ARC TV

This unit is connected between your TV and AV components. If you connect two or more AV components, you can select the video displayed on the TV and the audio output from this unit by changing the input selector. This describes the connections for a TV that does not support the ARC (Audio Return Channel) feature. By connecting with both an HDMI cable and a digital optical cable, you can not only output the video input to this unit to the TV, but you can also play the sound from the TV through this unit. If the TV doesn't have a DIGITAL OPTICAL OUT jack, use an analog audio cable and connect the TV's ANALOG AUDIO OUT jack to the AUDIO IN TV jack on this unit.

0 Connection with a digital optical cable is not necessary

if you will watch TV through a device such as a cable set-top box (that is, not use a tuner built into the TV) that you have connected to the INPUT jack on this unit.

1 HDMI cable, 2 Digital optical cable

Another TV or projector can be connected to the HDMI OUT SUB jack. This jack does not support ARC. For details about how to

output video from the HDMI OUT SUB jack (P22)

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Cable/Satellite set-top box

Streaming media player

Troubleshooting | Appendix

Step4: Connect the AV Components

if you have: HDMI AV Components

This is an example of connection with an AV component that has an HDMI jack. With connection to an AV component that conforms with the CEC (Consumer Electronics Control) standard, you can use features such as the HDMI CEC feature that links with the input selector, and the HDMI Standby Through feature which allows you to play video and audio from AV components on the TV even when this unit is in standby mode.

0 To play 4K or 1080p video, use a high speed HDMI

cable. Further, to enjoy HDCP2.2 compat ble video, connect to the HDMI IN1 to IN3 jacks.

Setup

0 HDMI setup ( CEC and HDMI Standby Through features. Make settings after all connections are complete. 0 To enjoy digital surround sound including Do by Digital, audio output should be set to "Bitstream output" on the connected Blu-ray Disc player or other device.



P21) is required to use the HDMI

1 HDMI cable

BD/DVD

You can connect a device such as a video camera to the AUX INPUT HDMI jack on the front panel.

GAME

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

if you have: Non-HDMI AV Components

This is an example of connection with an AV component that does not have an HDMI jack. Make the connections to the AV component to match the jacks it has. When video input connection is to the BD/DVD jack, the audio input connection should also be to the BD/DVD jacks, and so on, so that you connect the video input jacks to the jacks with the same name as the audio input jacks. Note that video signals input to the VIDEO IN jack or the COMPONENT VIDEO IN jacks will be converted to HDMI video signals and then output from the HDMI OUT jack.

0 To enjoy digital surround playback in formats such as

Dolby Digital, you need to make a connection for audio signals with a digital coaxial cable or digital optical cable.

0 It is poss ble to change assignment of the input jacks

you see in the illustration at left, so you can also connect to any jack other than BD/DVD. For details, see the Advanced Manual.

Setup

0 The COMPONENT VIDEO IN jacks are compatible only with 480i or 576i resolution. When you input video signals to the COMPONENT VIDEO IN jacks, set the output resolution of the player to 480i or 576i. Select interlace if there is no option for 480i, etc. If your player does not support 480i or 576i output, use the VIDEO IN jack. 0 To enjoy digital surround sound including Do by Digital, audio output should be set to "Bitstream output" on the connected Blu-ray Disc Player or other device.

BD/DVD

1 Component video cable, 2 Digital coaxial cable, 3 Analog audio cable

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Turntable

Troubleshooting | Appendix

if you have: Audio Components

Example of a connection with an audio component. Connect a CD player using a digital optical cable or analog audio cable. You can also connect a turntable that has an MM-type cartridge to the PHONO jack.

0 If the turntable has a built-in audio equalizer, connect it

to an AUDIO IN jack other than the PHONO jack. Further, if the turntable uses an MC type cartridge, install an audio equalizer compatible with the MC type cartridge between the unit and the turntable, then connect to any AUDIO IN jack other than the PHONO jack.

1 Digital optical cable, 2 Analog audio cable

If the turntable has a ground wire, connect it to he GND terminal of this unit.

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

ZONE2

MAIN ROOM

Troubleshooting | Appendix

Step5: Multi-zone Connection

if you connect: ZONE 2 TV

You can enjoy content from a Blu-ray Disc player on a TV equipped with an HDMI input jack in the separate room (ZONE 2) by playing a Blu-ray Disc player in the main room (where this unit is located), or play the content from another AV component. Only the video from devices connected to the HDMI IN1 to IN3 jacks can be played on the TV in the separate room.

Setup

0 Settings are required in Initial Setup, "4. Multi Zone Setup" ( 0 The audio from externally connected AV components can only be output when the audio is analog or 2ch PCM audio signals. It may also be necessary to convert the audio output of the AV component to PCM output.



P21) to enjoy this feature.

1 HDMI cable

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

ZONE2 PRE/LINE OUT

ZONE2

MAIN ROOM

LINE

Troubleshooting | Appendix

if you connect : ZONE 2 PRE/LINE OUT

You can enjoy 2ch audio in the separate room through speakers connected to a pre-main amplifier or power amplifier by, for example, playing a Blu-ray Disc player in

7.1 ch in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2).

ZONE 2 PRE/LINE OUT

Connect the ZONE 2 PRE/LINE OUT jacks of the unit and the LINE IN jacks of the pre-main amplifier or power amplifier in a separate room with an analog audio cable.

Connections with an AV component

Connect with HDMI IN 1 to 3 if you want to output an external AV component to ZONE 2. If the AV component doesn't have an HDMI jack, connect using a digital optical cable, digital coaxial cable, or analog audio cable. If any of these are already used, you do not have to connect using any of the others.

Setup

0 Settings are required in Initial Setup, "4. Multi Zone Setup" ( 0 The audio from externally connected AV components can only be output when the audio is analog or 2ch PCM audio signals. If you have connected to this unit with an HDMI cable or digital optical/coaxial cable, may be necessary to convert the audio output of the AV component to PCM output.



P21) to enjoy this feature.

1 Analog audio cable

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

MAIN ROOM

ZONE 2

ZONE 2B

(North American models)

(ZONE 2A for North

American models)

(ZONE 2A for North American models)

Troubleshooting | Appendix

if you connect: ZONE 2 SPEAKER

1 Speaker cable

You can enjoy 2ch audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio through the speakers in the separate room (ZONE 2). This feature is not available if you have connected the front speakers using Bi-Amping connection. You can play through a maximum of 5.1 channels in the main room during ZONE 2 playback. Listening modes such as Dolby Atmos cannot be selected.

ZONE 2 (ZONE 2A for North American models)

(North American models) ZONE 2B

You can output the same audio as described in ZONE 2A with another set of speakers to output as ZONE 2B. In this case, connect speakers with 8 ZONE 2 A/B. These cannot be connected when surround back speakers or height speakers are connected.

Setup

0 Settings are required in Initial Setup, "4. Multi Zone Setup" ( 0 To use the ZONE 2A+B output, set "Zone Speaker" in "1. AccuEQ Room Calibration" ( in Initial Setup to "Zone 2 A + B". 0 The audio from externally connected AV components can only be output when the audio is analog or 2ch PCM audio signals. If you have connected to this unit with an HDMI cable or digital optical/coaxial cable, may be necessary to convert the audio output of the AV component to PCM output.



to 16 Ω impedance for

P21) to enjoy this feature.



P20)

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

Step6: Connect Other Cables

Antenna Hookup

Move the antenna around while playing the radio to find the position with the best reception. Use a thumb tack or similar to attach the indoor FM antenna to a wall.

AM loop antenna

Indoor FM antenna

(North American models)

(European, Australian and Asian models)

Network Hookup

Connect this unit to the network using wired LAN or Wi-Fi (wireless LAN). You can enjoy network features such as internet radio, Music Server, and AirPlay by connecting the unit to the network. If you connect by wired LAN, connect with an Ethernet cable to the ETHERNET port as shown in the illustration. To connect by Wi-Fi, then after selecting "Wireless" in "3. Network Connection" ( desired setting method and follow the onscreen instructions to configure the connection.



P21) in Initial Setup, select the

Power Cord Hookup

Connect the power cord to the power outlet after completing all other connections.

0 North American, European and Asian models include

removable power cords. Connect the power cord to AC INLET of the unit and then connect to the outlet. Always disconnect the outlet side first when disconnecting the power cord.

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Engl sh

Deutsch

Français

Español

Ita iano

Nederlands

Svenska

Exit

Initial Setup

Language Select

SETUP MIC

Troubleshooting | Appendix

Step7: Power On & Initial Setup

Initial Setup starts automatically

1. AccuEQ Room Calibration

Once all connections are complete, change the TV's input to the input for this unit, inset batteries in the remote controller, and press Í to turn the power on. When you turn the unit on for the first time, Initial Setup is automatically shown on the TV to enable you to make settings required for startup using simple operations following onscreen guidance. These instructions will guide you through some items that you need to check beforehand. Read beforehand so the

Place the supplied speaker setup microphone in the listening position, measure the test tones emitted by the speakers, then the unit automatically sets the optimum volume level for each speaker, the crossover frequencies, and the distance from the listening position. This also enables correction of distortion caused by the acoustic environment of the room.

setup goes smoothly.

Operation

Select the item with the cursors of the remote controller

and press ENTER (a). To return to the previous screen, press (b).

0 When putting the speaker setup microphone on a tripod,

refer to the illustration when putting it in place.

To redo the Initial Setup

If you terminate the procedure on the way or want to change a setting made during Initial Setup, press on the remote controller, select "7. Miscellaneous" – "Initial Setup", and press ENTER.

0 The subwoofer sound may not be detected since it is

extremely low frequencies. Set the subwoofer volume to more than halfway.

0 Calibration takes several minutes to be completed. The

speakers emit the test tone at high volume during measurement, so be careful of your surroundings. Keep the room as quiet as possible during measurement. If the measurement is interrupted, turn off the household appliances.

0 When using THX certified speakers, THX recommends

setting the crossover frequency to "80Hz(THX)". It is also recommended to manually adjust the settings for each speaker to suit the specific characteristics of each room.

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

5-1 HDMI

HDMI CEC

HDMI Standby Through

Audio TV Out

Audio Return Channel

Auto Lip Sync

Auto(Eco)

Auto

Troubleshooting | Appendix

HDMI Setup

2. Source Connection

Check that each input source is connected correctly. Follow the guidance, select the input you want to confirm, start play of the selected player, and confirm that the images appear on the TV and that sound is played.

3. Network Connection

Set up Wi-Fi connection with an access point such as a wireless LAN router. There are the following two methods of connecting by Wi-Fi: "Scan Networks": Search for an access point from this unit. Find out the SSID of the access point beforehand. "Use iOS Device (iOS7 or later)": Share the iOS device's Wi-Fi settings with this unit.

If you select "Scan Networks", there are a further two choices of connection method. Check the following.

0 "Enter Password": Enter the password (or key) of the

access point to connect.

0 "Push Button": If the access point has an automatic

connection button, you can connect without entering a password.

0 If the SSID of the access point is not displayed, then in

the screen listing the SSIDs, select "Other..." with the  cursor on the remote controller and press ENTER, then follow the onscreen instructions.

Keyboard input

Wi-Fi Setup

SSID

a b cdef ghi jklm

nopqr s t uvwxy z

1 2 3456789 0 ^ \

, /; @[]

Ɵơ

When finished select the "OK" key

OKA/a

A/aA l Erase

To switch between upper and lower case, select "A/a" on the screen and press ENTER. To select whether to mask the password with " ＊ " or display it in plain text, press MEMORY on the remote controller. Press CLEAR to delete all the input characters.

0 A confirmation screen asking you to agree to the privacy

policy is displayed during network setting. Select "Yes" and press ENTER to indicate agreement.

4. Multi Zone Setup

Make these settings to enjoy video and audio in a room other than the main room (ZONE 2). Select "Using AV Receiver" when connecting speakers in the separate room. Select "with External Premain Amplifier" when connecting a pre-main amplifier in the separate room. Select "with External Power Amplifier" when connecting a power amplifier. If you are going to be connecting a TV in the separate room (ZONE 2), then when "Would you be using TV in 2nd room?" is displayed, select "Yes".

5. Audio Return Channel

If you have connected a TV that supports ARC, select "Yes". This unit's ARC setting turns on and you can listen to the TV's audio through this unit.

0 If you select "Yes", the HDMI CEC function is enabled

and power consumption increases during standby.

HDMI CEC

Make this setting to enable the control feature for devices complying with the CEC standard. This is set to on automatically if you have selected "Yes" in "5. Audio Return Channel" in the Initial Setup. Press the button on the remote controller to set "5. Hardware" – "HDMI" – "HDMI CEC" to "On" on the TV screen. Also enable the CEC control feature on the CEC device you have connected.

HDMI Standby Through

Even if this unit is in standby, the input signals from AV components are transmitted to the TV.

0 "Auto" / "Auto (Eco)": Select one of these settings

when connected AV components comply with the CEC standard. Irrespective of the input selector selected immediately before switching the unit to standby, you can transmit the input signals from AV components to the TV. Select "Auto (Eco)" if the TV is also CEC-compliant. You can reduce power consumption in standby mode.

0 Input selector names for "BD/DVD", etc.: You can

transmit the input signals from the set input selector to the TV. It can be selected when "HDMI CEC" is set to "Off".

0 "Last": You can transfer the input signals of the input

selector selected immediately prior to the unit being switched to standby. It can be selected when "HDMI CEC" is set to "Off". With this setting, you can switch the input selector even in the standby mode.

To exit the settings, press .

> Before start > Hookup > Setup >Playback > Part Names > Advanced Manual

Input source & volume

Listening mode

Signal format

Sampling frequency

Input signal resolu ion

The display changes few seconds later.

Troubleshooting | Appendix

Basic Playback

AV Component Playback

1. Switch the input on the TV to that assigned to the unit.

2. Press the input selector (a) on the remote controller with the same name as the jack to which you connected the player to switch the input. For example, press BD/DVD to play the player connected to the BD/DVD jack. Press TV to listen the TV's sound.

0 When the CEC link function works, the

input switches automatically when you have connected a CEC compliant TV and player to this unit using HDMI connection.

3. Start play on the player.

4. Use VOL+/– (b) to adjust the volume.

When a TV is connected to the HDMI OUT SUB jack

Press Q on the remote controller to display the Quick Menu, and set "Other" – "HDMI Out" to either "SUB" or "MAIN+SUB".

Listening Mode

This unit is equipped with a variety of listening modes, and you can select the optimum listening mode for movies, TV, music, and games by repeatedly pressing the MOVIE/TV, MUSIC, and GAME buttons (c). For details on the listening modes, see the Advanced Manual. This section introduces some of the popular modes.

Dolby Digital/DTS modes

When the input signal is a digital surround format such as Dolby Digital or DTS, you can select the listening mode that suits the input signal. Do by Digital is displayed for Dolby

Digital and DTS-HD Master Audio is displayed for DTS-HD Master Audio. The output is Stereo for 2-channel input signals.

Direct

This listening mode can be selected for all input signals. It shuts down processing that affects sound quality to deliver a playback sound quality closer to sources. Speakers play the sound field according to the number of channels in the input signal, so there would be output from only the front speakers for a 2 ch signal, for example.

Dolby Surround/DTS Neural:X

These listening modes allow you to expand the playback signal to 5.1 channels or 7.1 channels to suit the connected speaker configuration when the input signal is 2 channels or

5.1 channels.

0 We plan to provide support for the DTS

Neural:X a firmware update for this unit. You can select Neo:6 Cinema and Neo:6 Music until the update.

THX surround modes

Multiple surround speakers are installed in movie theaters so that the moviegoer is enveloped in a natural surround sound. Even with just two surround speakers, the THX Cinema mode achieves, with the high-quality technology developed by THX, the same kind of breadth of sound you would get in a movie theater along with the natural flow of timbre with the sound field towards the front. Also available are modes such as THX Music and THX Surround EX.

Original surround modes

You can select listening modes such as the All Ch Stereo mode where a stereo image is played from both the front and the rear, and Orchestra

(only with the MUSIC button) which is best for playback of classical and opera pieces.

Pure Audio (European, Australian and Asian models)

Listening mode that provides purer sound quality by switching off the power of the display and analog video circuits.

The listening mode last selected for the source is remembered for each of the MOVIE/TV, MUSIC, and GAME buttons. If content you play is not supported by the listening mode you selected last, the listening mode that is standard for that content is selected automatically. Press (d) repeatedly to switch the display of the main unit in order of:

> Before start > Hookup > Setup >Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

Network Functions

Network Services

1. Switch the input on the TV to that assigned to the unit.

2. Press NET to display the network service list screen.

3. Select the item with the cursors of the remote controller and press ENTER to confirm your selection (a). To return to the previous screen, press (b).

Internet Radio

When this unit is connected to a network, you can listen to TuneIn or other preregistered Internet radio services. After selecting the desired service, follow the on-screen instructions, using the cursors to select radio stations and programs, then press ENTER to play. Play starts when 100% is displayed for buffering.

Music Server

You can play music files stored on homenetwork compliant PCs or NAS devices connected to the same network as this unit. Select the server with the cursors, select the desired music file and press ENTER to start playback. Play starts when 100% is displayed for buffering.

0 This unit is compatible with Windows Media

Player 11 or 12 network servers or NAS that are compatible with home network functionality. You may need to make some settings in advance to use Windows Media Player 11 or 12. Enable media streaming for this player in Windows Media details, see the Advanced Manual.

USB

Play music files on a USB storage device. Connect the USB storage device to the USB jack on the rear of the unit, select USB in the list of network services, and press ENTER to confirm. Select the desired folder or music file with the cursors, and press ENTER to confirm and start playback.

0 Operation cannot be guaranteed for all USB

storage devices.

0 This unit can use USB storage devices that

comply with the USB mass storage device class standard. The unit is also compatible with USB storage devices using the FAT16 or FAT32 file system formats.

Notes:

0 Network services become selectable after the network starts up even if they cannot be selected first. 0 Functionality may be introduced by firmware updates and service providers may cease services, meaning that some network services and content may become unavailable in the future. Furthermore, available services may vary depending on your area of residence.

Player. For

> Before start > Hookup > Setup >Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

iPhone

OnkyoTX-XXX

AirPlay

You can wirelessly enjoy the music files on an iPhone®, iPod touch as this unit.

0 Update the OS version on your iOS device to the latest

1. Connect the iOS device to the access point.

2. Press NET.

3. Tap the AirPlay icon in the control center of the iOS

4. Play the music files on the iOS device.

0 The default status is for the Network Standby feature to

0 Due to the characteristics of AirPlay wireless

You can also play back music files on the computer with iTunes (Ver. 10.2 or later). Before operation, make sure this unit and the PC are connected to the same network, then press NET on this unit. Next, click the AirPlay icon in iTunes, select this unit from the list of devices displayed, and start play of a music file.

, or iPad® connected to the same access point

version.

device and select this unit from the list of devices displayed, and tap "Done".

be on, so when you do steps 3 and 4 above, this unit automatically comes on and input switches to "NET". To reduce the amount of power consumed in standby mode, press the button on the remote controller, then in the Setup menu displayed set "5. Hardware" – "Power Management" – "Network Standby" to "Off".

technology, the sound produced on this unit may slightly be behind the sound played on the AirPlay-enabled device.

OnkyoTX-

BLUETOOTH® Playback

Pairing

1. When you press the button on the remote controller, "Now Pairing..." is displayed on this unit's display, and the pairing mode is enabled.

2. Enable (turn on) the BLUETOOTH function of the BLUETOOTH enabled device, then select this unit from amongst the devices displayed. If a password is requested, enter "0000".

0 To connect another BLUETOOTH enabled device, press

and hold the button until "Now Pairing..." is displayed, then perform step 2 above. This unit can store the data of up to 8 paired devices.

0 The coverage area is 48 feet (15 meters). Note that

connection is not always guaranteed with all BLUETOOTH enabled devices.

Playing Back

1. When the unit is on, connect the BLUETOOTH enabled device.

2. The input selector of this unit will be automatically switched to "BLUETOOTH".

3. Play music. Increase the volume of the BLUETOOTH enabled device to an appropriate level.

0 Due to the characteristics of BLUETOOTH wireless

technology, the sound produced on this unit may slightly be behind the sound played on the BLUETOOTH enabled device.

> Before start > Hookup > Setup >Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

Others

Listening To the Radio

1. Press TUNER (a) on the remote controller repeatedly to select either "AM" or "FM" on the display.

2. Press MODE (c) on the remote controller, so that the "TunMode: Auto" is displayed on the display.

3. When you press the  /  cursor (b) buttons on the remote controller, automatic tuning starts, and searching stops when a station is found. When tuned into a radio station, the "TUNED" indicator on the display lights.

You can preset up to 40 stations.

1. Tune into the AM/FM radio station you want to register.

2. Press MEMORY (d) on the remote controller so that the preset number on the display flashes.

3. While the preset number is flashing (about 8 seconds), repeatedly press the  /  cursor (b) buttons on the remote controller to select a number between 1 and 40.

4. Press MEMORY (d) again on the remote controller to register the station. When registered, the preset number stops flashing. To select a preset radio station, press the  /  cursor (b) buttons on the remote controller.

0 To delete a preset station, press the  /  cursor (b)

buttons on the remote controller to select the preset number you want to delete, press MEMORY (d) on the remote controller and then press CLEAR (e) while the preset number is flashing. When deleted, the number on the display goes off.

Frequency step setting

Press the button on the remote controller to select "7. Miscellaneous" – "Tuner" – "AM/FM Frequency Step" or "AM Frequency Step" and select the frequency step for your area. Note that when this setting is changed, all radio presets are deleted.

Multi-zone

Play

1. While holding down MODE (a) on the remote controller, press ZONE 2 (b) for 3 or more seconds until the remote indicator blinks twice.

0 The remote controller switches to the mode for

controlling ZONE 2.

To return the remote controller to main room control mode: While holding down MODE (a) on the remote

controller, press MAIN (c) for 3 seconds or more until the remote indicator flashes once.

2. Point the remote controller at the main unit and press Í (d). "Z2" lights on the main unit display.

3. Press the input selector button (e) of the input to be played in the separate room. To control on the main unit, press ZONE 2 and within 8 seconds, press the input selector button of the input to be played in a separate room. To play the same source in the main room and separate room, press ZONE 2 on the main unit twice.

0 You cannot select different inputs for the main room

and separate room with the "NET" or "BLUETOOTH" input selector. You cannot select different stations for the main room and separate room with the AM/FM radio. When you select an input or station for the separate room, the main room also switches.

0 DSD and Dolby TrueHD audio signals are not output

to ZONE 2 when selected with the "NET" input selector.

0 If ZONE 2 is turned on when the listening mode of the

main room is Pure Audio, it will automatically switch to the Direct listening mode. (European, Australian and Asian models)

4. To adjust the volume on the power amplifier in the separate room

> Before start > Hookup > Setup >Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

or the ZONE 2 SPEAKER, adjust with VOL+/– on the remote controller. To control on the main unit, press ZONE 2 and adjust with the MASTER VOLUME control within 8 seconds.

The information for a connected device can be displayed on the TV screen in a separate room. Press the button while the remote controller is in the mode for controlling ZONE 2.

0 Power consumption in standby mode increases when the

multi-zone function is being used.

To turn off the function

Press Í while in the mode for controlling ZONE 2 on the remote controller.

Playing in ZONE 2 only

If you turn the unit to standby during multi-zone playback, the Z2 indicator is dimmed and the playback mode is switched to playback in a separate room only. Setting ZONE 2 to on while this unit is in standby will also switch the playback mode to the same setting.

Settings

Settings are required in Initial Setup, "4. Multi Zone Setup"



P21) to use the multi-zone feature. When checking the

( setting content, refer to the following, press on the remote controller, and check in the Setup menu that is displayed.

– When you have connected a TV in the separate room

with an HDMI cable, have you selected "Use" in "1. Input /Output Assign" – "TV Out/OSD" – "Zone2 HDMI"?

– When you are playing the audio from an AV component

room

with an HDMI cable in the separate

, have you selected "Use" in "1. Input /Output Assign" – "TV Out/ OSD" – "Zone2 HDMI"?

– When you have connected speakers in a separate room

with speaker cable, have you selected "Zone 2" (or "Zone 2 A + B") in "2. Speaker" – "Configuration" – "Zone Speaker"?

– When you have connected a power amplifier in a

separate room with an analog audio cable and you want to control the volume with this unit, have you selected "Variable" in "6. Multi Zone" – "Zone 2" – "Output Level"?

Others

To adjust the sound quality

It is possible to enhance or moderate the bass and treble of front speakers. Press TONE on the main unit several times to select the desired setting from "Bass" and "Treble", and turn the TONE dial to adjust.

0 You can also adjust the sound quality of a power

amplifier connected in a separate room. After pressing ZONE 2 on the main unit, within 8 seconds press TONE and turn the TONE dial to adjust.

0 This cannot be set if the listening mode is Pure Audio

(European, Australian and Asian models) or Direct.

Quick Menu

By pressing Q on the remote controller during play, you can adjust frequently used settings, such as the sound quality, using on-screen menus. Select the item with the cursors of the remote controller and press ENTER to confirm your selection. To return to the previous screen, press .

Quick Menu

Tone

Level

AccuEQ

Other

Bass

Treble

0 You can adjust the sound quality with "Tone". "Other"

includes settings such as "A/V Sync" that allows you to adjust the audio delay when the video is behind the audio, "Music Optimizer" that provides better sound quality for compressed audio, and "HDMI Out" which allows you to select the HDMI OUT terminal to output from "MAIN", "SUB", and "MAIN+SUB".

BD/DVD

When the unit is operating erratically

Try restarting the unit

Restarting the unit may help it operate more smoothly. To restart the unit, turn it to standby, and then press Í ON/ STANDBY on the main unit for at least 5 seconds. (The unit’s settings will be maintained.) If there is no improvement even after the unit is restarted, try disconnecting and reconnecting the power cords of the unit and connected equipment.

Resetting the unit (this resets the unit settings to the default)

If restarting the unit doesn't fix the problem, resetting the unit to the status at the time of shipment may solve the problem. If you reset the unit status, your preferences will be reset to the defaults. Note them down before the operation below.

1. While pressing the CBL/SAT input selector button on the

main unit, press Í ON/STANDBY.

2. "Clear" appears on the display and the unit returns to standby. Do not unplug the power cord until "Clear" disappears from the display.

To reset the remote controller, while holding down MODE, press until the remote indicator flash twice (about 3 seconds).

> Before start > Hookup > Setup > Playback >Part Names > Advanced Manual

Troubleshooting | Appendix

Front Panel

1 2 106 121157 98

1. Í ON/STANDBY button: Turns the unit on or into

standby mode.

2. MUSIC OPTIMIZER button/indicator (North American models): Turns on/off the Music Optimizer function that provides better sound quality for compressed audio. PURE AUDIO button/indicator (European, Australian and Asian models): Switches the unit to Pure Audio mode. (



P22)

3. HYBRID STANDBY indicator: Lights if the unit enters standby mode when the features are enabled that continue to work when this unit is in standby, such as HDMI Standby Through and Network Standby.

4. Remote control sensor

5. ZONE 2 button: Controls the multi-zone function. (

6. OFF button: Switches the multi-zone function off.



P25)

16 1715

7. DIMMER button: You can adjust the brightness of the display in three steps. It cannot be turned off completely.

8. Display (

9. SETUP button: Displays the Setup menu.

10.

Cursor buttons (4 TUNING 3 / 2 PRESET 1 button) and ENTER button: Select the item with the cursors and press ENTER to confirm your selection. When using the TUNER, select the frequency with 4 TUNING 3, or select preset stations with 2 PRESET 1.

11.

RETURN button: Returns the display to the previous state.

12.

MASTER VOLUME: Allows you to adjust the volume.

13.

(Up) LISTENING MODE button / (Down) LISTENING MODE dial: Allows you to select the listening mode. Press the button repeatedly to select a category from



P29)

1918

"Movie/TV", "Music", "Game", then turn the dial to change the mode. (

14.

(Up) TONE button / (Down) TONE dial: Adjusts the high tone and low tone. Press the button repeatedly to select the item to adjust from "Bass" and "Treble", and turn the dial to adjust.

15.

PHONES jack: Stereo headphones with a standard plug (1/4 inch or ø6.3 mm) are connected.

16.

Input selector buttons: Switch the input to be played.

17.

SETUP MIC jack: The supplied speaker setup microphone is connected.

18.

AUX INPUT AUDIO jack: You can play the audio from an external player by connecting using a stereo mini plug cable.

19.

AUX INPUT HDMI jack: Connect to a video camera, etc., using a HDMI cable.



P22)

> Before start > Hookup > Setup > Playback >Part Names > Advanced Manual

180°

90°

Troubleshooting | Appendix

Rear Panel

1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable.

2. TUNER AM/FM 75Ω terminal: The supplied antennas are connected.

3. VIDEO IN jacks: Input the video signals from AV component with an analog video cable.

4. USB port: A USB storage device is connected so that music files stored in it can be played. You can also supply power (maximum 5V/1A) to USB devices with a USB cable.

5. ETHERNET port: Connect to the network with an Ethernet cable.

6. COMPONENT VIDEO IN jacks: Input the video signals from AV components with a component video cable.

23 5 764

1211 1413

7. HDMI OUT jacks: Transmit video signals and audio signals with a HDMI cable connected to a monitor such as a TV or projector.

8. HDMI IN jacks: Transmit video signals and audio signals with a HDMI cable connected to an AV component.

9. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH enabled device. Adjust their angles according to the connection status.

10.

AC INLET (North American, European and Asian models): The supplied power cord is connected. Power cord (Australian models)

11.

GND terminal: The ground wire of the turntable is connected.

12.

AUDIO IN jacks: Input TV or AV component audio signals with an analog audio cable.

13.

SPEAKERS terminals: Connect speakers with speaker cables.

15 16 17 18

109

You can connect the multichannel speakers for the main room and the speakers for a separate room (ZONE 2). (North American models are compatible with banana plugs.)

14.

ZONE 2 PRE/LINE OUT jack: Output audio signals with an analog audio cable to a pre-main amplifier or power amplifier in a separate room (ZONE 2). (

15.

SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each of the SUBWOOFER PRE OUT jacks.

16.

12V TRIGGER OUT jack: Allows you to connect a device with 12V trigger input jack to enable link operation between the device and the unit.

17.

IR IN

jack

18.

RS232 port: For connection to the home control system.

: Allows you to connect a multiroom remote control kit.



P17)

> Before start > Hookup > Setup > Playback >Part Names > Advanced Manual

Approx 5 m (16 ft.)

Troubleshooting | Appendix

Remote Controller

1. Í button: Turns the unit on or into standby mode.

2. Input selector buttons: Switches the input to be played.

3. Q (QUICK MENU) button: You can perform common settings on the TV screen. (

4. Cursor buttons and ENTER button: Select the item with the cursors and press ENTER to confirm your selection.

5. button: Displays the Setup menu.

6. Volume buttons: Allows you to adjust the volume. This button also cancels the muting.

7. button: Temporarily mutes audio. Press again to cancel muting.

8. LISTENING MODE buttons: Allows you to select the listening mode. ( MAIN/ZONE 2 buttons: Controls the multi-zone function. (

9. Play buttons: You can start play of the Music Server or USB.

10. Server or USB. CLEAR button: Deletes all characters you have entered when entering text on the TV screen.

11.

button: Switches the information on the display.

12.

button: Returns the display to the previous state.

13.

MODE button: Switches tuning to an AM/FM station between automatic tuning and manual tuning.

14.

MEMORY button: Used to register AM/FM radio stations.



P26)



P22)

button: You can start repeat or random play of the Music

30°



P25)

Display

1. Speaker/Channel display: Displays the output channel that corresponds to the selected listening mode.

2. Lights in the following conditions. Ë: When headphones are connected. Z2: When ZONE 2 is on.

NET: When "NET" is selected with the input selector and the unit is connected to the network. It will flash if the connection to the network is not correct. USB: When "NET" is selected with the input selector and the unit is connected by USB and the USB device is selected. Flashes if the USB is not properly connected. HDMI: When HDMI signals are input and the HDMI input is selected. DIGITAL: When digital signals are input and the digital input is selected.

3. Lights according to the type of input digital audio signals and the listening mode.

4. Lights in the following conditions. RDS (European, Australian and Asian models): Receiving RDS broadcasting. TUNED: Receiving AM/FM radio. FM ST: Receiving FM stereo. SLEEP: When the sleep timer is set. AUTO STBY: When Auto Standby function is enabled.

5. Flashes when muting is on.

6. Displays various information of the input signals. Characters that cannot be displayed on this unit are replaced with asterisks ( ＊ ).

0 When playing back software which has been encoded in Do by

7. Lights when operating the "NET" input selector indicating remote controller cursor operations are possible in screens showing list of tracks, for example.

2 35

: When connected by BLUETOOTH. : When connected by Wi-Fi.

Digital, Dolby Digital Plus and Dolby TrueHD, sometimes you may see a brief message which will read "DialogNorm: X dB" (X being a numeric value). For example, if you see the following message: "DialogNorm:+4dB", to keep the overall output level at THX calibrated loudness, just turn down the volume control by 4dB.

License and Trademark Information

Εϭλϟ΍ Ε΍έΎη· ϝΑϘΗγ˵ϣ ϥϳΑ %/8(7227+ ΙϭΗϭϠΑϟ΍ ϲϓ ϖϓ΍ϭΗ ΩϭΟϭ 2QN\R ϥϣοΗ ϻ

%/8(7227+ ΙϭΗϭϠΑϟΎΑ ΓΩϭίϣϟ΍ ΓίϬΟϷ΍ ϊϳϣΟϭ Γέϭλϟ΍ϭ

ΙϭΗϭϠΑϟΎΑ Ωϭίϣ έΧ΁ ίΎϬΟ ϱ΃ϭ Γέϭλϟ΍ϭ Εϭλϟ΍ Ε΍έΎη· ϝΑϘΗγ˵ϣ ϥϳΑ ϖϓ΍ϭΗϟ΍ ϯΩϣ ϰϠϋ ϑέόΗϠϟ

ϥϭϛΗ Ωϗ ˬϝϭΩϟ΍ νόΑ ϲϓ ϝϳϛϭϟ΍ ϝ΄γ΍ ϭ΃ ίΎϬΟϠϟ ΔϘϓ΍έϣϟ΍ ϖ΋ΎΛϭϟ΍ ΔόΟ΍έϣΑ ϡϗ ˬ%/8(7227+

ΔϳϠΣϣϟ΍ ΕΎρϠγϟ΍ ϊΟ΍έ %/8(7227+ ΙϭΗϭϠΑϟΎΑ ΓΩϭίϣϟ΍ ΓίϬΟϷ΍ ϡ΍ΩΧΗγ΍ ϰϠϋ Ε΍ΩϳϳϘΗ ϙΎϧϫ

Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, Surround EX and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol, the DTS-HD logo, and DTS-HD Master Audio are registered trad emarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

Manufactured under license from THX Ltd. THX and the THX logo are registered in the U.S. and other jurisdictions. All rights reserved. Surround EX is a trademark of Dolby Laboratories. Used with permission. U.S. Pat. nos. 7,254,239 & 7,593,533 & 7,974,425 & 8,452,028 & 8,509,457 Taiwan Pat. I238671 European Pat. 1,360,874

THX Select2 Plus

Before any home theater component can be THX Select2 Plus certified, it must pass a rigorous series of quality and performance tests. Only then can a product feature the THX Select2 Plus logo, which is your guarantee that the Home Theater products you purchase will give you superb performance for many years to come. THX Select2 Plus requirements define hundreds of parameters, including power amplifier performance, and integrated amplifier performance and operation for both digital and analog domains. THX Select2 Plus receivers also feature proprietary THX technologies (e g., THX Mode) which accurately translate movie soundtracks for home theater playback.

Re-Equalization and the “Re-EQ” logo are trademarks of THX Ltd.

“VLSC” and “VLSC (logo)” are trademarks of Onkyo Corporation.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

The Wi-Fi CERT FIED Logo is a certification mark of the Wi-Fi Alliance

Ihren lokalen Behörden.

Onkyo Corporation garandeert niet de AV-receiver en alle Raadpleeg voor compatibiliteit tussen de AV-receiver en een ander apparaat met

BLUETOOTH

AirPlay, iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

iPad Air and iPad mini are trademarks of Apple Inc.

“Made for iP od”, “Made for iP hone” and “ Made f or iPad” mean tha t an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this d evice or its compliance with safety and regulatory standards.

Please note that the u se of this accessory with iPod, iPhone or iPad may affect wireless performance.

AirPlay works with iPhone, iPad, and iPod touch with iOS 4 3 3 or later, Mac with OS X Mountain Lion or later, and PC with iTunes 10.2.2 or later.

Apple, Apple TV and Safari are trademarks of Apple Inc., registered in the U.S. and other countries.

The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade names are those of their respective owners.

Onkyo Corporation does not guarantee BLUETOOTH compatibility between the AV receiver and all BLUETOOTH enabled devices. For compatibility between the AV receiver and another device with BLUETOOTH technology, consult the device’s documentation and dealer. In some countries, there may be restrictions on using BLUETOOTH devices. Check with your local authorities.

Onkyo Corporation ne garantit pas la compatibilité BLUETOOTH entre l'amplituner AV et tous les appareils compatibles BLUETOOTH. Pour assurer la compatibilité entre l'ampli-tuner AV et un autre périphérique à technologie BLUETOOTH, consultez la documentation de l'appareil et le vendeur. Dans certains pays, il peut exister des restrictions sur l'utilisation d'appareils BLUETOOTH. Vérifiez auprès des autorités locales.

Onkyo Corporation no garantiza la compatibilidad BLUETOOTH entre el receptor de AV y todos los dispositivos con tecnología BLUETOOTH. Para obtener información sobre la compatibilidad entre el receptor de AV y otro dispositivo con tecnología BLUETOOTH, consulte al distribuidor y la documentación del dispositivo. En algunos países, es posible que el uso de dispositivos BLUETOOTH esté restringido. Consulte con las autoridades locales.

Onkyo Corporation non garantisce la compatibilità BLUETOOTH tra il ricevitore AV e tutti i dispositivi abilitati al BLUETOOTH. Per verificare la compatibilità tra il ricevitore AV e un altro dispositivo dotato di tecnologia BLUETOOTH, consultare la documentazione del dispositivo in questione o contattare il rivenditore. In alcuni Paesi potrebbero esistere delle limitazioni per l'utilizzo di dispositivi BLUETOOTH. Verificare le condizioni con le autorità locali.

Onkyo Corporation garantiert nicht die

dem AV-Receiver und allen Zur Kompatibilität zwischen dem AV-Receiver und einem anderen Gerät mit BLUETOOTH Technologie, schauen Sie in die Dokumentation des Geräts und fragen Sie den Händler. Es kann sein, dass es in einigen Ländern Beschränkungen zur Nutzung der BLUETOOTH Geräte gibt. Prüfen Sie das bei

BLUETOOTH

fähigen Geräten.

Kompatibilität zwischen

verkoper. In sommige landen geldt mogelijk een beperking op het gebruik van BLUETOOTH

Onkyo Corporation garanterar inte BLUETOOTH kompatibilitet mellan AVreceiver och alla BLUETOOTH aktiverade enheter. För kompatibilitet mellan AV-receiver och en annan enhet med BLUETOOTH teknik, se enhetens dokumentation och återförsäljaren. I vissa länder kan det finnas begränsningar för användandet av BLUETOOTH enheter. Kontrollera hos de lokala myndigheterna.

Onkyo Corporation ei takaa AV-vastaanottimen ja kaikkien laitteiden välistä Selvittääksesi AV-vastaanottimen ja toisen yhteensopivuutta, tutustu laitteen dokumentaatioon ja käänny jälleenmyyjän puoleen. Joissakin maissa rajoituksia. Tarkista asia paikallisilta viranomaisilta.

PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission.

Google Cast and the Google Cast badge are trademarks of Google inc.

The product with this logo is conformed to Hi-Res Audio standard defined by Japan Audio Society. This logo is used under license from Japan Audio Societ y.

This product is protected by certain intellectual property rights of Microso ft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft.

Windows and the Windows logo are trademarks of the Microsoft group of companies.

QR Code is a registered trademark of DENSO WAVE INCORPORATED.

“x.v.Color” and “x.v.Color” logo are trademarks of Sony Corporation.

DSD and the Direct Stream Digital logo are trademarks of Sony Corporation.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

AccuEQ, Music Optimizer, RIHD and WRAT are trademarks of Onkyo Corporation.

BLUETOOTH

technologie de documentatie van het apparaat of de

apparatuur. Controleer de wetgeving in het land van gebruik.

BLUETOOTH

apparaten.

yhteensopivuutta.

BLUETOOTH

laitteiden käyttöön voi liittyä

compatibiliteit tussen de

BLUETOOTH

laitteen

+ 69 hidden pages