OMRON E5CS User Manual

Temperature Controllers

E5CS

Easy Setting Using DIP Switch and Simple Functions in DIN 48 × 48 mm-size Temperature Controllers

• Easy setting using DIP and rotary switches.

• Models with two alarms added to Series, ideal for applications requiring alarms.

• Multi-input (thermocouple/platinum resistance thermometer) models also available.

• Clearly visible digital display with character height of 13.5 mm.

• RoHS compliant.

Model Number Structure

■ Model Number Legend

Plug-in Models

E5CS-@@@@U-@

1. Output type

2. Number of alarms

Note: A functional explanation is provided here for illustration, but models are not necessarily available for all possible combinations. Refer to

1 2 3 4 5

3. Input type

R: Relay Q: Voltage for driving SSR

Blank: No alarm 1: 1 alarm 2: 2 alarms

Ordering Information when ordering.

Examples

• Relay control output, without alarm, thermocouple input, plug-in construction, light gray case: E5CS-RKJU-W

• Relay control output, one alarm output, multi-input, plug-in construction, light gray case: E5CS-R1TU-W

KJ: Thermocouple P: Platinum resistance thermometer G: Thermistor T: Thermocouple/platinum resistance

thermometer (multi-input)

4. Power supply voltage

Blank: 100 to 240 VAC D: 24 VAC/VDC

5. Case color

W: Light gray

Ordering Information

■ List of Models

Size Power supply

1/16 DIN

× 48 × 72.5

× H × D)

Note: Models with two alarm outputs always use the upper limit alarm mode for the alarm 2 output.

voltage

100 to 240 VAC 0 Relay E5CS-RTU-W E5CS-RKJU-W E5CS-RPU-W E5CS-RGU-W

24 VAC/VDC 0 Relay --- E5CS-RKJDU-W E5CS-RPDU-W E5CS-RGDU-W

Number of

alarm

points

1 Relay E5CS-R1TU-W E5CS-R1KJU-W E5CS-R1PU-W E5CS-R1GU-W

2 (See note.)

1 Relay --- E5CS-R1KJDU-W E5CS-R1PDU-W E5CS-R1GDU-W

Control output TC/Pt universal input,

Voltage (for driving SSR) E5CS-QTU-W E5CS-QKJU-W E5CS-QPU-W E5CS-QGU-W

Voltage (for driving SSR) E5CS-Q1TU-W E5CS-Q1KJU-W E5CS-Q1PU-W E5CS-Q1GU-W Relay E5CS-R2TU-W --- --- --Voltage (for driving SSR) E5CS-Q2TU-W --- --- ---

Voltage (for driving SSR) --- E5CS-QKJDU-W --- ---

Voltage (for driving SSR) --- E5CS-Q1KJDU-W --- ---

Case color: Light gray

TC input,

Case color:

Light gray

Pt input,

Case color:

Light gray

Thermistor input

Temperature Controllers E5CS 1

■ Accessories (Order Separately)

Socket without Alarm (8 Pins)

Type Model

Front Connecting Socket P2CF-08 Back Connecting Socket (flush mounting) P3G-08 Front Connecting Socket (with finger protection) P2CF-08-E Finger Safe Terminal Cover for P3G Y92A-48G

Protective Cover

Type Model

Hard Protective Cover Y92A-48B

Socket with Alarm (11 Pins)

Type Model

Front Connecting Socket P2CF-11 Back Connecting Socket (flush mounting) P3GA-11 Front Connecting Socket (with finger protection) P2CF-11-E Finger Safe Terminal Cover for P3G Y92A-48G

Specifications

■ Ratings

Supply voltage 100 to 240 VAC, 50/60 Hz 24 VAC/VDC 50/60 Hz Operating voltage range 85% to 110% of rated supply voltage Power consumption 5 VA 3 VA/2 W Sensor input Thermocouple: K, J, L

Platinum resistance thermometer: Pt100, JPt100 Thermistor: E52-THE@@ Multi-input (thermocouple/platinum resistance thermometer): K, J, L, T, U, N, R, Pt100, JPt100

Control output

Control method ON/OFF or 2-PID (with automatic PID parameter setting function) Alarm output SPST-NO, 250 VAC, 1A (resistive load) Setting method Digital setting using front panel keys Indication method 3.5-digit, 7-segment digital display (character height: 13.5 mm) and deviation indicators Other functions • Setting change prohibit (key protection)

Ambient temperature Ambient humidity 25% to 85%

Storage temperature

Relay output SPDT, 250 VAC, 3 A (resistive load)

Voltage output (for driving the SSR)

12 VDC, 21 mA (with short-circuit protection circuit)

• Input shift

• Temperature unit change (

• Direct/reverse operation

• Temperature range, Sensor switching (K/J/L, Pt100/JPt100)

• Switching is performed between a thermocouple and platinum resistance thermometer for multi-input models.

• Control period switching

• 8-mode alarm output

• Sensor error detection (excluding thermistor models)

−10 to 55°C (with no condensation or icing)

−25 to 65°C (with no condensation or icing)

°C/°F)

2 Temperature Controllers E5CS

■ Characteristics

Setting accuracy Thermocouple (See note 1.): (±1% of indication value or ±2°C, whichever is greater) ±1 digit max.

Indication accuracy (ambient temperature of 23

Influence of temperature R thermocouple inputs: (±2% of PV or ±10

Influence of voltage

Platinum resistance thermometer (See note 2.): (±0.5% of indication value or ±1 Thermistor (See note 3.): (1% FS of indication value) ±1 digit max.

°C)

°C, whichever is greater) ±1 digit max.

Other thermocouple inputs: (±2% of PV or ±4 Platinum resistance thermometer inputs: (±1% of PV or ±2

°C, whichever is greater) ±1 digit max. °C, whichever is greater) ±1 digit max.

Thermistor: (±2% FS) ±1 digit max.

Hysteresis (for ON/OFF control) 0.2% FS (0.1% FS for multi-input (thermocouple/platinum resistance thermometer) models) Proportional band (P) 1 to 999

°C (automatic adjustment using auto-tuning/self-tuning)

Integral time (I) 1 to 1,999 s (automatic adjustment using auto-tuning/self-tuning) Derivative time (D) 1 to 1,999 s (automatic adjustment using auto-tuning/self-tuning) Alarm output range Absolute-value alarm: Same as the control range

Other: 0% to 100% FS Alarm hysteresis: 0.2

°C or °F (fixed)

Control period 2/20 s Sampling period 500 ms Insulation resistance 20 M

Ω min. (at 500 VDC)

Dielectric strength 2,000 VAC, 50/60 Hz for 1 min between current-carrying terminals of different polarity

Vibration resistance

Malfunction Destruction 10 to 55 Hz, 0.75-mm single amplitude for 2 hr each in X, Y, and Z directions

Shock resistance Malfunction

Destruction

10 to 55 Hz, 20 m/s

min., 3 times each in six directions

100 m/s

min., 3 times each in six directions

300 m/s

for 10 min each in X, Y, and Z directions

Life expectancy Electrical 100,000 operations min. (relay output models) Weight Approx. 110 g (Controller only) Degree of protection Front panel: Equivalent to IP50, Enclosure Category 2 (IEC 60529), Rear case: IP20; Terminals: IP00 Memory protection EEPROM (non-volatile memory) (number of writes: 1,000,000) EMC EMI Radiated: EN 55011 Group 1 Class A

EMI Conducted: EN 55011 Group 1 Class A Radiated Electromagnetic Field Immunity: EN 61000-4-2: 4 kV contact discharge (level 2)

RF-interference Immunity: EN 61000-4-3: 10 V/m (80-1000 MHz, 1.4-2.0 GHz amplitude modulated) (level 3)

Conducted Disturbance Immunity: EN 61000-4-6: 3 V (0.15 to 80 MHz) (level 2) Noise Immunity (First Transient Burst Noise): EN 61000-4-4

8 kV air discharge (level 3)

10 V/m (900 MHz pulse modulated)

Burst Immunity: 2 kV power-line (level 3), 1 kV I/O signal-line (level 3) Surge Immunity: EN 61000-4-5: Power line: Normal mode 1 kV; Common mode 2 kV

Output line (relay output): Nor mal mode 1 kV; Common mode 2 kV

Voltage Dip/Interrupting Immunity: EN 61000-4-11 0.5 cycle, 100% (rated voltage)

Approved standards UL 61010C-1 (listing)

CSA C22.2 No.1010-1

Conformed standards EN 61326, EN 61010-1, IEC 61010-1

Note: 1. The following exceptions apply to thermocouples.

• U, L: ±2°C ±1 digit max.

VDE 0106 Part 100 (finger protection), when the terminal cover is mounted.

• R: ±3°C ±1 digit max. at 200°C or less

2. The following exception applies to platinum resistance thermometers.

• Input set values 1 for E5CS-U: 1% FS ±1 digit max.

3. The following exceptions apply to thermistors.

• When the unit setting is °C, temperature indication ranges exceeding the set temperature range ±10% FS may not be accurate.

• When the unit setting is °F, the temperature range for the input setting numbers 4 and 9 (609 to 630°F) and temperature indication

ranges exceeding the set temperature range

−5% FS to +10% FS may not be accurate.

°C, whichever is greater) ±1 digit max.

■ Electrical Life Expectancy Curve for Relays (Reference Values)

500 300

operations)

100

Life (

E5CS 250 VAC, 30 VDC

(resistive load) cosφ = 1

0123456

Switching current (A)

Temperature Controllers E5CS 3

■ Temperature Range

Thermocouple Input Models

range

(selected using switch)

Temperature

(Default setting: 2)

Minimum setting unit 1°C1°C

Input K J/L

1,000

900 800 700 600 500 400 300 200 100

Setting number

500 500

400 400

300 300

200 200

0000000000

0123456789

999

600

The shaded value indicates the d efault

setting status.

Platinum Resistance Thermometer Input Models

range

(selected using switch)

Temperature

(Default setting: 3)

Minimum setting unit 1°C0.1°C1°C0.1°C1°C0.1°C

Setting number

Input JPt100/Pt100

500 400 300 200

50 50.0 80 99.9

100

−100

0.0 0.0000000.0

−50 −20

200 199.9

400 400

300 300

0123456789

The shaded value indicates the d efault

setting status.

Thermistor Input Models (For details on Sensors, refer to page 6.)

Input G

6 kΩ

30 kΩ

550 Ω

4 kΩ

6 kΩ

30 kΩ

550 Ω

range

(selected

using switch)

Temperature

(Default setting: 1)

Minimum setting unit 1°C

500 400 300 200 100

−100

Setting number

(0°C)

(200°C)

(0°C)

50 100 50 100

−50 −50

150 200 150 200

050 050

300 300

100 150 100 150

0 123456789

(200°C)

4 kΩ

(200°C)

The shaded value indicates the defaul t

setting status.

Multi-input (Thermocouple/Platinum Resistance Thermometer) Models

• Using Thermocouple Sensors, Control Mode Switch 5: OFF

Input K J L T UNR

1,700 1,600 1,500 1,400

1,300 1,300

Temperature

range

(selected

using switch)

(Default setting: 0)

Setting number

1,300 1,200 1,100 1,000

900 800 700 600 500 400 300 200 100

−100

−99 −99 −99 −99 −99 −99

850 850

400 400

199.9 199.9 199.9

0.0 0.0 0.0 0

0123456789

Minimum setting unit 1°C0.1°C1°C0.1°C1°C0.1°C1°C

• Using Platinum Resistance Thermometers, Control Mode Switch 5: ON

Input Pt100 JPt100

Temperature

range

(selected

using switch)

(Default setting: 0)

Minimum setting unit 1°C0.1°C1°C0.1°C1°C

Setting number

1,000

850

900 800 700 600 500 400 300 200 100

−100

199.9 200 199.9 200 99 99

0.0000.000

−99 −99 −99 −99

500

400 400

0123456789

1,700

The shaded value indicates the d efault

setting status.

The shaded value indicates the defaul t

setting status.

4 Temperature Controllers E5CS

External Connection Diagram

Plug-in models

Sensor Thermocouple (See note 3.) Platinum resistance thermometer

Without alarms

With alarms

Voltage output models (See note 1.) Voltage output models (See note 1.) Voltage output models (See note 1.)

12 VDC,

21 mA

Relay output models Relay output models Relay output models

(K, J)

Voltage output models (See note 1.)

12 VDC, 21 mA

OUT

Relay output models Relay output models Relay output models

Voltage output

6 7

100 to 240 VAC 24 VAC/VDC

(See note 2.)

Two alarm points

Alarm output

100 to 240 VA 24 VAC/VDC (See note 2.)

Voltage output models (See note 1.)

12 VDC, 21 mA

Alarm output 1

Alarm output 2

OUT

(See note 3.)

12 VDC,

21 mA

3 2

Voltage output

6 7

100 to 240 VAC 24 VAC/VDC (See note 2.)

Two alarm points

Alarm output

100 to 240 VAC 24 VAC/VDC (See note 2.)

Alarm output 1

Alarm output

Thermistor

12 VDC,

21 mA

3 2

Voltage output models (See note 1.)

12 VDC, 21 mA

OUT

Voltage output

6 7

100 to 240 VAC 24 VAC/VDC (See note 2.)

Alarm output

100 to 240 VAC 24 VAC/VDC (See note 2.)

Note: 1. The voltage output (12 VDC, 21 mA) is not electrically isolated from the internal circuits. When using a grounding thermocouple, do not

connect output terminals 4 or 5 to ground. Otherwise, unwanted current paths will cause measurement errors.

2. Models with 100 to 240 VAC and 24 VAC/VDC are separate. Models using 24 VDC have no polarity.

3. Be sure to check the sensor type before using multi-output (thermocouple/platinum resistance thermometer) models.

Nomenclature

E5CS-U Plug-in Models

Temperature display

Output indicator

Deviation indicators

Mode indicators

Mode Key

Down key

Alarm indicators

Up Key

Temperature Controllers E5CS 5

Thermistors

Element Interchangeable Thermistor

Temperature Ranges

Temperature

range

−50°C to 50°CBlue 6 kΩ (0°C) 3390K A pair of 0.12 dia. 7 Teflon-insulated stranded wires with 0.86

°C to 100°CBlack 6 kΩ (0°C) 3390K

°C to 150°C Red 30 kΩ (0°C) 3450K

100

°C to 200°C Yellow 0.55 kΩ (200°C) 4300K

150

°C to 300°C Green 4 kΩ (200°C) 5133K Flat glass-wool-shielded lead cable with 0.12 dia. 10 conductors

Color code Nominal resistance Thermistor

constant

Lead wire

outer dia. each

and external dimensions of 2.5

× 1.55

Specifications

Item E52-THE@@

Coupling method Element interchangeable thermistor Class JIS class 1 Protective tubing material SUS304 Time constant 8 to 15 s in still water Dissipation factor 2.4 to 2.8 mW/ Lead wire heat resistive

temperature

180

°C

°C in still air

Error

Detectable temperature Error

−50°C to 100°C ±1°C max.

100

°C to 350°C ±1% max. of detectable temperature

Permissible Temperature

Detectable temperature Operating temperature

−50°C to 50°C 100°C

°C to 100°C 150°C

°C to 150°C 200°C

100

°C to 200°C 250°C

150

°C to 300°C 350°C

Note: Models with non-standard lead wire lengths and protective

tubing lengths are available on request.

This Thermistor is a dedicated Thermistor for the E5C2 and E5CS.

6 Temperature Controllers E5CS

+ 14 hidden pages