OM3910STM/NTM
OM3911STM/NTM
3.0 AMP POSITIVE ADJUSTABLE VOLTAGE REGULATOR APPROVED TO DESC DRAWING 5962-87675
Three Terminal, Adjustable Voltage, 3.0 Amp
Precision Positive Regulator In Hermetic
JEDEC TO-257AA Package
FEATURES
•Approved To DESC Standardized Military Drawing 5962-8767501UX/TX and 5962-8767502UX/TX
•Isolated Hermetic Package, JEDEC TO-257AA Outline
•Reference Voltages Set To ±1% and ±2%
•Built-In Thermal Overload Protection
•Short Circuit Current Limiting
•Similar Electrically To Industry Standard LM150A
DESCRIPTION
These three terminal positive regulators approved by DESC, are supplied in a hermetically sealed isolated, metal TO-257 package. All protective features are designed into the circuit including thermal shutdown, current limiting and safearea control. With heat sinking, they can deliver over 3.0 amps of output current. These units feature 1% and 2% initial voltage tolerance, 0.35% load regulation and
.01% line regulation.
ABSOLUTE MAXIMUM RATINGS @ 25°C
Input - Output Voltage Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +35 V Operating Junction Temperature Range. . . . . . . . . . . . . . . . . . . . . . . . - 55°C to + 150°C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65°C to + 150°C Typical Power/Thermal Characteristics:
Rated Power @ 25°C
3.3
TC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 W TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 W
Thermal Resistance:
qJC Case U. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2°C/W qJC Case T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5°C/W qJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50°C/W
a
DESC |
REFERENCE |
OMNIREL |
DRAWING |
VOLTAGE |
PART NUMBER |
5962-8767501UX |
±2% |
OM3910STM |
5962-8767502UX |
±1% |
OM3911STM |
5962-8767501TX |
±2% |
OM3910NTM |
5962-8767502TX |
±1% |
OM3911NTM |
|
|
|
4 11 R1 |
3.3 - 113 |
Supersedes 2 07 R0 |
OM3910STM/NTM OM3911STM/NTM
ELECTRICAL CHARACTERISTICS -55°C |
TA 125°C (Note 1) unless otherwise specified |
|||||||||
Test |
Symbol |
Conditions |
|
|
Dash |
Limits |
|
Unit |
||
|
|
|
|
|
|
No. |
Min. |
Max. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Reference Voltage |
VREF |
IOUT = 10mA |
|
|
01 |
1.20 |
|
1.30 |
V |
|
|
|
TA = 25°C |
|
|
02 |
1.238 |
|
1.262 |
V |
|
|
|
3.0V |
(VIN - VOUT) 35V, P |
30W |
01 |
1.20 |
|
1.30 |
V |
|
|
|
10mA |
IOUT |
3.0A (Note 2) |
|
02 |
1.225 |
|
1.270 |
V |
Line Regulation |
RLINE |
3.0V |
(VIN - VOUT) 35V, |
|
All |
|
|
0.01 |
%/V |
|
(Note 2) |
|
IOUT = 10mA, TJ = 25°C |
|
P/N’s |
|
|
|
|
||
|
|
3.0V |
(VIN - VOUT) 35V, |
|
All |
|
|
0.05 |
%/V |
|
|
|
IOUT = 10mA |
|
|
P/N’s |
|
|
|
|
|
Load Regulation |
RLOAD |
10mA |
IOUT |
3.0A, |
|
All |
|
|
17.5 |
mV |
(Note 2) |
|
VOUT |
5.0A, TJ = 25°C |
|
P/N’s |
|
|
|
|
|
|
|
10mA |
IOUT |
3.0A, |
|
All |
|
|
50 |
mV |
|
|
VOUT |
5.0A |
|
|
P/N’s |
|
|
|
|
|
|
10mA |
IOUT |
3.0A, |
|
All |
|
|
0.35 |
% |
|
|
VOUT |
5.0A, TJ = 25°C |
|
P/N’s |
|
|
|
|
|
|
|
10mA |
IOUT |
3.0A, |
|
All |
|
|
1.0 |
% |
|
|
VOUT |
5.0A |
|
|
P/N’s |
|
|
|
|
Thermal Regulation |
|
20ms pulse, TA =25°C |
|
All P/N’s |
|
|
0.01 |
%/W |
||
Ripple Rejection |
RN |
VOUT = 10V, f = 120Hz |
|
All |
66 |
|
|
dB |
||
(Note 3) |
|
CADJ = 10µF |
|
|
P/N’s |
|
|
|
|
|
Adjust Pin Current |
IAdj |
|
|
|
|
All P/N’s |
|
|
100 |
µA |
Adjust Pin |
³IAdj |
10mA |
IOUT |
3.0A, IOUT = 10mA |
All |
|
|
5.0 |
µA |
|
Current Change |
|
3.0V |
(VIN - VOUT) 35V |
|
P/N’s |
|
|
|
|
|
Miminum Load Current |
IMIN |
(VIN - VOUT) = 35V |
|
All P/N’s |
|
|
5.0 |
mA |
||
Current Limit |
ICL |
(VIN - VOUT) |
10V |
|
All P/N’s |
3.0 |
|
|
A |
|
|
|
(VIN - VOUT) = 30V |
|
All P/N’s |
0.3 |
|
|
A |
Notes:
1.Unless otherwise specified, these specifications apply for (VIN - VOUT) = 5.0V and IOUT = 1.5A.
2.Regulation is measured at a constant junction temperature using a pulse technique. Changes in output voltage due to heating effects are covered under the specification for thermal regulation.
3.Guaranteed if not tested to the limits specified.
3.3
3.3 - 114