OM4212SM
ISOLATED SURFACE MOUNT POWER
SCHOTTKY CENTER-TAP RECTIFIER
Hermetic Surface Mount Package
10 Amp, 45 Volt Schottky Center-Tap
FEATURES
•Hermetic Surface Mount Package
•Very Low Forward Voltage
•Low Recovery Charge
•High Efficiency For Low Voltage Supplies
• 45V Blocking @ Rated T |
jmax |
•50V Repetitive Surge Voltage
•Center-Tap Configuration
•Available Hi-Rel Screened
DESCRIPTION
This series of surface mount devices offer two Schottky barriers arranged in a common cathode configuration and is ideally suited for a full wave output rectifier in
low voltage switching power supplies where small size and high reliability are required. Common anode configuration also available.
ABSOLUTE MAXIMUM RATINGS
(Tc =25°C)Per Diode
Peak Inverse Voltage............................................................................................. |
45 V |
Maximum Average D.C. Output Current.................................................................. |
5 A |
Peak Surge Current (Non-Repetitive, 8.3mS) ....................................................... |
60 A |
Peak Reverse Transient Current ......................................................................... |
1.0 A |
Storage Temperature Range ......................................................... |
- 55° C to + 175° C |
Junction OperatingTemperature Range ......................................... |
- 55° C to + 150° C |
Package Thermal Resistance, Junction-to-Case .......................................... |
2.5° C/W |
SCHEMATIC
1213
2 |
COMMON CATHODE |
3 |
|
Contact factory for common anode, common cathode is standard.
PIN CONNECTION
12 |
|
|
|
|
|
|
|
|
3 |
3.5 |
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
1 |
|
23
Pin 1: DC
Pin 2: AC
Pin 3: AC
Case: Isolated
4 11 R1 |
3.5 - 67 |
Supersedes 1 05 R0 |