Olympus SZX-DA Instructions Manual
INSTRUCTIONS
SZX-DA
DRAWING ATTACHMENT
This instruction manual is for the Olympus SZX-DA drawing attachment. To ensure the safety,
obtain optimum performance and familiarize yourself fully with the use of this product, we
recommend you study this manual thoroughly before operating the equipment. Retain this
instruction manual in an easily accessible place near the work desk for future reference.
A X 7 1 8 9
i
IMPORTANT
1
Getting Ready
1. This manual describes the SZX-DA drawing attachment only. Before using this equipment with the SZX microscope and
associated options, make sure that you have carefully read and understood the corresponding manuals, and understand
how to use all components of the microscopic system in combination.
2. This attachment is a precision instrument. Handle it with care and avoid subjecting it to sudden or severe impact.
3. Do not use the attachment anywhere where it may be subjected to direct sunlight, high temperature and humidity, dust or
vibrations.
2
Maintenance and Storage
1. Clean all glass components by wiping gently with gauze. To remove fingerprints or oil smudges, wipe with gauze slightly
moistened with a mixture of ether (70%) and alcohol (30%).
Since solvents such as ether and alcohol are highly flammable, they must be handled carefully. Be sure to keep
these chemicals away from open flames or potential sources of electrical sparks —— for example, electrical equipment
that is being switched on or off. Also remember to always use these chemicals only in a well-ventilated room.
2. Do not use organic solvents to clean non-optical components. If smudges are difficult to clean, wipe them with a soft cloth
slightly moistened with a diluted neutral detergent.
3. Never disassemble any part of the unit as this could cause malfunctions or reduced performance.
ii
3
Caution
If the equipment is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition, the
equipment may also be damaged. Always operate the equipment as outlined in this instruction manual.
The following symbols are used to set off text in this instruction manual.
: Indicates that failure to follow the instructions in the warning could result in bodily harm to the
user and/or damage to equipment (including objects in the vicinity of the equipment).
# : Indicates that failure to follow the instructions could result in damage to equipment.
} : Indicates commentary (for ease of operation and maintenance).
CONTENTS
1 NOMENCLATURE
2 ASSEMBLY
3 DRAWING/OBSERVATION SETUP
4 OBSERVATION PROCEDURE
5 DRAWING MAGNIFICATION
6 SPECIFICATIONS
1
2
3
4
6
7
SZX-DA
1
NOMENCLATURE
Positioning pin
Mirror tube clamping knob
Clamping screw
Mirror tube
Light shield cap
Focusing handle
Loading...