OLYMPUS E-10 TECHNICAL INFORMATION E10 E002

TECHNICAL INFORMATION

SUBJECT: The upgrade process of the firmware

Product name: E-10

How to confirm firmware:

1 The power is turned on and made the PLAY mode.
2 Card Cover is opened.
3 A simultaneous push does [+/-] and [the picture quality mode] button.
4 A LCD monitor indicates the version of firmware.

NO. TID-E10-E002

DATE 2001/6/13

Card:

1 CIS is rewritten in the same way as C-2500L.
2 Folder of [romw_b] is made in the route of the card.
3 The file of the firmware is kept with the name of [rom4842b.bin] in this folder.

Version up procedure:

1 The card which firmware went into is put.
2 A power supply is turned on with pushing OK button. (The mode isn't asked to it.)
3 A card LED (red) is turned on. (After red LED turned on, there is no problem even if OK button is left.)
4 If a card LED (red) comes to flash, completion
5 The power supply of the camera is turned off.

OLYMPUS OPTICAL CO.,LTD TOKYO