OLYMPUS C-700 UZ Disassembly and Assembly Procedure v1

B. DISASSEMBLY AND ASSEMBLY PROCEDURE

C-700 Ultra Zoom

B. DISASSEMBLY AND ASSEMBLY

PROCEDURE

[1] REMOVAL OF CABINET BACK, CABINET FRONT AND LCD ............................ B-2

[2] REMOVAL OF CP1 BOARD ...................................................................................B-3

[3] REMOVAL OF STROBE, EVF AND ST1 BOARD .................................................. B-3

[4] REMOVAL OF CA1 BOARD AND LENS ASSEMBLY ........................................... B-4

[5] BOARD LOCATION ................................................................................................ B-4

B-1 Ver.1

B. DISASSEMBLY AND ASSEMBLY PROCEDURE C-700 Ultra Zoom

[1] REMOVAL OF CABINET BACK, CABINET FRONT AND LCD

Disassembly perform as follows and assembly perform by reversing the disassembly steps.

Be sure to discharge the main capacitor, then continue to disassembling.

! Beware of electric shock

Danger of electric shock.
Use a discharging tool to remove
the electrical charge before working.

3.OPEN

11.Holder monitor

10.Two screws

1.6 x 3

5.Cabinet back

6.FPC

7.FPC

10.Two screws 1.6 x 3

4.Two screws

1.6 x 5

2.Two screws

1.6 x 8

12.LCD

1.OPEN

8.Connector

9.Spacer cabi back

B-2 Ver. 1