Olivetti D-COPIA 1800, D-COPIA 2200 OPERATION GUIDE

QUICKGuide d-Copia 1800/d-Copia 2200

1920293235

10152122

46791417232728

313437 2526

11243336

Cassette 1 (J11, J21)

Inside Cassette 2 to 4 (J12 to 16, J22 to 24)

Clearing paper jams

➊

Pull out the cassette.

➋

Remove any jammed paper without

tearing it.

NOTE If the paper does happen to tear,

remove any loose scraps from inside the machine.

➌

Push the cassette back in ﬁ rmly.

NOTE Check to see if paper is out of

position in the cassette. If the paper is out of position, set the paper properly.

NOTE If JAM21 is displayed, remove the

jammed paper referring to Paper Jam in the Left Cover

➊

Open the left cover of the cassette

being used.

➋

Remove any jammed paper without

tearing it.

① ②

Inside the left Cover (J20 to 50, J52 to 57, J60, J61)

Clearing paper jams

➊

Pull the left cover handle up to

open the left cover.

CAUTION The ﬁ xing unit is extremely

hot. Take sufﬁ cient care when working inthis area, as there is a danger of getting burned.

➋

Remove any jammed paper without

tearing it.

NOTE If the paper does happen to tear,

remove any loose scraps from inside the machine.

➌

If the optional duplex unit is installed, raise the duplex unit and remove any paper.

NOTE If the paper does happen to tear,

remove any loose scraps from inside the machine.

➍

Close the left cover.

① ②

③

Cod.: 551807en_es

Paper Output Slot (J50)

NOTE If the paper does happen to tear,

remove any loose scraps from inside the machine.

❸

Close the left cover of the cassette.

➍

Pull out the cassette.

➎

Remove any jammed paper without

tearing it.

NOTE If the paper does happen to tear,

remove any loose scraps from inside the machine.

➏

Push the cassette back in ﬁ rmly.

➊

If jammed paper is seen through the paper output slot, pull it out to remove it.

NOTE If the paper does happen to tear,

remove any loose scraps from inside the machine.

➋

Pull the left cover handle up to open the left cover.

➌

Remove any jammed paper without tearing it.

NOTE If the paper does happen to tear,

remove any loose scraps from inside the machine.

➍

Close the left cover.

③ ④

⑤

① ②

③ ④

Multi-Purpose Tray (J10)

Optional Document Processor (J70-75, J78)

➊

Remove all of the paper remaining

in the multi-purpose tray.

➋

Reset the paper in the multi-purpo-

se tray. The error message disappears.

➊

Remove all of the originals

remaining in the original table.

➋

Open the left cover.

➌

Remove any jammed original

without tearing it.

➍

Raise the paper feed unit A.

➎

Remove any jammed originals

without tearing them.

➏

Turn the dial as shown in the illustration to remove the jammed original.

➐

Close the left cover to its original position. Reset all the originals and start copying again.

① ②

①

③

⑥

②

④

QUICKGuide d-Copia 1800/d-Copia 2200

Operation panel

Preparations

Optional settings

For more details refer to the user manual on the co-packed CD-ROM.

Copy Operation

➊

Place the originals on the platen or in the optional document processor.

➋

Enter the number of copies with the TEN

PAD

key.

Paper source

Select the desired paper source by pressing

PAPER SELECTION button. If the setting APS is ac-

tive, the selected cassette with automatically match the original format. Special sizes or papers should be used through the multi purpose tray.

Cod.: 551807en_es

8 Key

9 Key

Adjusting the copy exposure

Choose the document type between

PHOTO

, PHOTO and TEXT.

LIGHTER or DARKER button to adjust the

Press

TEXT &

exposure, if needed.

Sort mode

COLLATE button. Enter the number of co-

Press pies with the

Start Key (Indicator)1

Stop/Clear Key2

Reset Key3

Energy Saver Key4

Numeric keys5

Interrupt Key6

Logout Key7

OK Key10

Auto%100% Key11

Paper Supply Indicator12

Paper Selection Key13

Paper Supply Level Indicator14

Paper Misfeed Indicator15

MP Indicator16

No. of Copies/Zoom Display17

Message Display18

Original Size Key19

EcoPrint Key20

Auto Density Key21

Density Adjustment Key/Density 22 Display

Attention Indicator23

Error Indicator24

Add Toner Indicator25

Maintenance Indicator26

Image Quality Selection Key27

Printer Key (Indicator)28

2-sided Key29

Mixed Original Size Key30

Combine Key31

Split Key32

Program Key33

Border Erase Key34

Media Type Key35

Collate Key36

Margin Key37

Note The device is able to rotate each set, if

A4 and A4-R paper is avaliable. has to be enabled to use this function. Refer to the chapter System Setting in the user manual.

Preset Zoom

100 %/AU TO% to light up the Auto% indi-

Press cator. Press paper. Press

Choosing Zoom ratio

Press

and . Change the zoom percentage displayed using up or down. The percentage can also be input using the

OK. Press START.

Duplex copy

2-SIDED button until the desired duplex

Press mode is selected. Choose between:

· 1-side original --> 2 sided copy

· 2-sided original --> 2 sided copy

· Book --> 2 sided copy

When choosing book, refer to the original size indicators of the platen.

TEN PAD key. Press START button.

ROTATE /OFFSET

PAPER SELECTION and select the

START to begin copying.

TEN PAD keys. Press

For more details refer to the user manual on the co-packed CD-ROM.