Oliver 2218 Installation Manual
Grand Rapids, Michigan, U.S.A. 49504-5298
USER’S OPERATING AND INSTRUCTION MANUAL
MODEL 2218
ROTARY ACCUMULATOR
2218S20000-CV
ROTARY ACCUMULATOR
INDEX
Section Description
SAFETY INSTRUCTIONS -------------------------------------- 2218S20002 --------------------------- 1-1
DESCRIPTION/SPECIFICATIONS --------------------------- 2218S20003---------------------------- 2-1
Description -------------------------------------------------------------------------------------------------- 2-1
Specifications----------------------------------------------------------------------------------------------- 2-2
INSTALLATION INSTRUCTIONS ---------------------------- 2218S20004 --------------------------- 3-1
Accumulator Installation ----------------------------------------------------------------------------------3-1
OPERATING INSTRUCTIONS -------------------------------- 2218S20005 --------------------------- 4-1
TROUBLESHOOTING ------------------------------------------- 2218S20006 --------------------------- 5-1
The Accumulator Will Not Start (Motor is Not Humming) ----------------------------------------5-1
The Accumulator Will Not Start (Motor is Humming) --------------------------------------------- 5-1
MAINTENANCE --------------------------------------------------- 2218S20007 --------------------------- 6-1
Removing the Rotary Table --------------------------------------------------------------------------- 6-1
Replacing the Rotary Table --------------------------------------------------------------------------- 6-1
Cleaning ---------------------------------------------------------------------------------------------------- 6-1
REPLACEMENT PARTS SECTION
MAIN FRAME ---------------- ------------------------------------- 2218S20008 --------------------------- 7-1
Drawing ------------------------------------------------------------------------------------------------- 7-1
Parts List ----------------------------------------------------------------------------------------------- 7-2
TABLE AND COVERS ------------------------------------------- 2218S20009 --------------------------- 8-1
Drawing ------------------------------------------------------------------------------------------------ 8-1
Parts List ----------------------------------------------------------------------------------------------- 8-2
ELECTRICAL ------------------------------------------------------ 2218S20010 -------------------------- 9-1
Drawing ----------------------------------------------------------------------------------------------- 9-1
Parts List ---------------------------------------------------------------------------------------------- 9-2
WIRING DIAGRAM 1-60-115 --------------------------------- 2218S20011 -------------------------- 10-1
WARRANTY ---------------------------------------------------- --- GEN 040225
WARRANTY PROCEDURE------------------------------------ GEN 040226
RETURNED PARTS POLICY --------------------------------- GEN 040227
Document No. Page No.
2218S20001 0-1
ROTARY ACCUMULATOR
SAFETY INSTRUCTIONS
WARNING
VARIOUS SAFETY DEVICES AND METHODS OF GUARDING HAVE BEEN
PROVIDED ON THIS MACHINE. IT IS ESSENTIAL HOWEVER THAT THE MACHINE
OPERATORS AND MAINTENANCE PERSONNEL OBSERVE THE FOLLOWING
SAFETY PRECAUTIONS. IMPROPER INSTALLATION, MAINTENANCE, OR
OPERATION OF THIS EQUIPMENT COULD CAUSE SERIOUS INJURY OR DEATH.
1. Read this manual before attempting to operate your machine. Never allow an
untrained person to operate or service this machine.
2. Connect the machine to a properly grounded electrical supply that matches the
requirements shown on the electrical specification plate and follow all specifications
of local electrical codes.
3. Disconnect and lock-out the machine from the power supply before cleaning or
servicing.
4. Check and secure all guards before starting the machine.
5. Observe all caution and warning labels affixed to the machine.
6. Use only proper replacement parts.
7. Do not wear loose fitting clothing or loose hair when working near this machine.
Shirt tails should be tucked in.
8. Wear proper, personal, protective, safety equipment.
9. Keep Hands away from the moving parts of this machine while it is in operation.
10. In addition to these general safety instructions, please follow the more specific safety
instructions in the rest of this operating instruction manual.
WARNING
DO NOT USE FOR OTHER THAN ORIGINALLY INTENDED PURPOSE.
2218S20002 1-1
ROTARY ACCUMULATOR
DESCRIPTION/SPECIFICATIONS
Description
The Oliver Model 2218 Rotary Accumulator is of a compact, sturdy, design. The
machine is easy to operate and It’s design will provide years of efficient, trouble-free
operation requiring a minimum of maintenance. This Rotary Accumulator is designed to
catch packages exiting a conveyor type packaging machine.
The Model 2218 Rotary Accumulator is made of stainless, plated, and painted steel, and
food grade plastic construction for easy cleaning and maintenance.
Oliver Packaging & Equipment Company, who has a reputation of serving the Baking
Industry for over 70 years, backs these accumulators.
Specifications
Space Requirements:
2218 (All Dimensions are Approximate)
2218S20003 2-1
ROTARY ACCUMULATOR
Product Capacities:
Table is designed to support up to 25lbs. of product at a time.
Standard Electrical Options: (Others consult factory).
1 phase, 60 hz, 115VAC, 2 Amps.
Standard Table sizes,
36” (inches)
Shipping Weight
175 lbs. (approximate)
Net Weight
125 lbs. (approximate)
2218S20003 2-2
ROTARY ACCUMULATOR
INSTALLATION INSTRUCTIONS
Accumulator Installation:
Before starting the Installation process make sure you observe the following caution
note.
CAUTION
THE SLICER IS HEAVY, USE PROPER TECHNIQUE WHEN LIFTING.
KEEP BACK STRAIGHT, KNEES BENT, AND LIFT WITH LEGS.
USE GLOVES TO PROTECT HANDS.
Select a location for your accumulator which has electrical service compatible with the
load the machine will place on it as indicated on the electrical data plate of the machine.
Position the machine while it is still in its packaging as close as possible to the desired
end location. Expose the machine by removing the outer packaging. Using at least two
people, (one in the front and one at the back of the machine), lift the accumulator from
the resting surface of the packaging and set the machine onto floor as close as possible
to the desired end location. Make final location adjustments by sliding the machine to its
desired location. Adjust the legs to obtain the appropriate height.
2218S20004 3-1
Loading...