4400
Table of contents
Loading...
Passpo rt 640 0
Passport 4400 and 6400 Quick Start Guide
241-6401-280
Passport 4400 and 6400 Quick Start Guide
Publication: 241-6401-280
Document status: Standard
Document version: 6.0S1
Document date: August 1999
Copyright © 1999 Nortel Networks.
All Rights Reserved.
Printed in Canada
NORTEL NETWORKS, the globemark design, the NORTEL NETWORKS corporate logo, and
PASSPORT are trademarks of Nortel Networks.
Contents
5
About this document 9
How this document is setup 9
When to use this document 9
Related documents 10
Passport 4400 10
Passport 6400 10
Logging onto the Passport switches 11
Log onto the Passport 4400 11
Log onto the Passport 6400 11
Configuring an MPANL over a dedicated line 13
Configure the 4400 14
Configure the 6400 14
Verifying the MPANL connection 15
On the 4400 15
From the 6400 16
Troubleshooting the MPANL connection 16
From the 4400 16
From the 6400 17
Configur ing an MPANL tu nneled through public frame
relay 19
Configure the 4400 20
Configure the 6400 20
Veri fying the MPAN L connect ion 22
On the 4400 22
On the 6400 22
Troubleshooting the MPANL connection 23
Interworking Guide 7.0M1
6 Contents
On the 4400 23
On the 6400 23
Configur ing a netw ork managem ent connectio n to a
4400 25
Configure the 4400 27
Configure the 6400 27
Add the FRUNI 28
Add the FRUNI DLCI 28
Add the FRDTE 29
Add the Virtual Router 29
Add the Ethernet Port 30
Add the 4400 to the IP Routing table 30
Verifying the network management connection 31
On the 4400 31
On the 6400 31
Configuring the RSI - RSA connection 33
Configuring the RSI and RSAs 34
On the 4400 34
On the 6400 hosting the primary RSA 34
On the 6400 hosting the secondar y RSA 35
Verifying the RSI - RSA connection 36
On the 4400 36
On the 6400 with the primary RSA 36
On the 6400 with the secondary RSA 36
241-6401-115 7.0M1
List of figures
Figure 1 MPANL over a dedicated line 13
Figure 2 MPANL tunneled through public frame relay 19
Figure 3 Network management connection to a 4400 26
Figure 4 A simplified RSI - RSA configuration example 34
7
Interworking Guide 7.0M1
8
241-6401-115 7.0M1
About this document
This document covers the basic provisioning needed to bring up a
Multiservice Passport Access Network Link (MPANL) between a Passport
4400 and 6400.
Also includ ed is a s ecti on on est abl ishin g a net work managem ent co nnecti on
to the 4400, and a s ecti on on configuring the RSI -RSA componen ts req uired
for voice networking.
How this document is setup
Each section includes an example configuration with typical variables. The
commands that follow use the variables from the example. When you use the
commands, replace the example variables with variables unique to your
network set up.
The examples and commands use and assume default values wherever
possible.
When to use this document
The provisioning in this guide occurs after
9
• the 4400 expansion modules are installed, the box is installed an d the
cables co nnected
• the 6400 cards are install ed, software downl oaded, cabl es connected and
a network management station has access to the node
Passport 4400 and 6400 Quick Start Guide 6.0S1
10 About this document
Relate d do cu m en ts
This document use s commands and information found in the Passport 440 0
and 6400 suite of documents. When you require additional information,
consult the following documents:
Passport 4400
800-1943-20, Analog V oice Manual
800-1944-20, T1/E1 and DVM Manual
800-1951-20, Hardware Manual
800-1950-20, CLI Refer ence
800-1952-20, Operat or’s Manual
Passport 6400
241-6401-275 Passport 6400 NMS Connectiv ity Guide
241-6401-050 Passport 6400 Commands
241-6401-765 Passport 6400 Remote Server Agent Guide
241-6401-480 Passport 6400 Multiservice Passport Access Network Link
Guide
241-6401-755 Passport 6400 Voice Networking Guide
241-6401-115 Passport 6400, 4400 Interwo rk ing Guide
241-6401-280 6.0S1
Logging onto the Passport switches
Log onto the Passport 4400
1 Connect the suppl ied RJ45 cabl e from the serial port on your computer or
teminal to the local management port on the 4400.
2 Open a terminal emulation session with the following se tt ings
Data Rate: 9600 bps
Data Bits: 8
Stop Bits: 1
Parity: None
The port is self sensing. A welcom e screen and command line prompt
appears.
3 Log onto the Command Line Interfac e (CLI)
> cli
Ignore the password prompt and hit the <enter> key.
4 Reload the default setti ngs into memeory. This command is optional.
CLI> reset system default reset
11
Log onto the Passport 6400
This document assumes that a network manag ement workstation is already
connected to eithe r the 6400 locall y, or is connected to the Pass port Networ k
and can access the 6400 remotely.
This assumpt ion is base d on the u sual practi ce of deplo ying an d settin g up the
Passport 6400 nodes prior to the deployment of the 4400s.
Passport 4400 and 6400 Quick Start Guide 6.0S1
12 Logging onto the Passport switches
241-6401-280 6.0S1
Loading...