o order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to
T
provide the following information when contacting us:
• the MODEL NUMBER of the product (NTEL7506.2)
• the NAME of the product (NordicTrack AUDIOSTRIDER 600 elliptical exerciser)
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the part(s) (see pages 24 to 27)
LIMITED WARRANTY
WHAT IS COVERED—The entire NordicTrack elliptical exerciser (“Product”) is warranted to be free of all defects in material and
workmanship.
WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.
HOW LONG IT IS COVERED—ICON Health & Fitness, Inc. (“ICON”) warrants the product for one year after the date of purchase.
Labor is covered for one year. There is a lifetime warranty on the frame.
WHAT WE DO TO CORRECT COVERED DEFECTS—We will ship to you, without charge, any replacement part or component, providing the repairs are authorized by ICON first and are performed by an ICON trained and authorized service provider, or, at our
option, we will replace the Product.
WHAT IS NOT COVERED—Any failures or damage caused by unauthorized service, misuse, accident, negligence, improper assembly or installation, alterations, modifications without our written authorization or by failure on your part to use, operate, and maintain
as set out in your Userʼs Manual (“Manual”).
WHAT YOU MUST DO—Always retain proof of purchase, such as your bill of sale; store, operate, and maintain the Product as specified in the Manual; notify our Customer Service Department of any defect within 10 days after discovery of the defect; as instructed, return any defected part for replacement or, if necessary, the entire product, for repair.
USERʼS MANUAL—It is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product. Remember to do the
periodic maintenance requirements specified in the Manual to assure proper operation and your continued satisfaction.
HOW TO GET PARTS AND SERVICE—Simply call our Customer Service Department at 1-888-825-2588 and tell them your name
and address and the serial number of your Product. They will tell you how to get a part replaced, or if necessary, arrange for service
where your Product is located or advise you how to ship the Product for service. Before shipping, always obtain a Return
Authorization Number (RA No.) from our Customer Service Department; securely pack your Product (save the original shipping carton if possible); put the RA No. on the outside of the carton and insure the product. Include a letter explaining the product or problem and a copy of your proof of purchase if you believe the service is covered by warranty.
Model No. NTEL7506.2
Serial No.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness
for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how
long an implied warranty lasts. Accordingly, the above limitation may not apply to you.
No one is authorized to change, modify or extend the terms of this limited warranty. This warranty gives you specific legal rights and
you may have other rights which vary from state to state.
NordicTrack is a registered trademark of ICON IP, Inc.
2
27
EXPLODED DRAWING A—Model No. NTEL7506.2R
1
4
10
11
17
17
19
20
22
23
72
24
26
27
28
29
32
32
34
35
5
6
36
37
39
39
65
66
66
67
67
67
67
68
68
69
71
7
7
7
7
8
8
9
9
70
25
21
21
38
40
41
16
16
93
91
82
78
86
31
80
92
78
92
84
31
31
78
83
83
83
78
92
86
89
73
73
77
77
92
92
78
86
31
80
78
84
31
84
31
31
85
97
97
85
90
97
31
31
97
92
83
83
83
78
89
86
90
97
31
31
97
85
96
95
95
81
95
96
95
85
75
91
31
31
82
82
33
33
33
33
33
33
99
0909A
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precau-
tions before using the elliptical exerciser.
1. Read all instructions in this manual and all
warnings on the elliptical exerciser before
using the elliptical exerciser. Use the elliptical exercise only as described in this
manual.
2. It is the responsibility of the owner to ensure
that all users of the elliptical exerciser are
adequately informed of all precautions.
3. The elliptical exerciser is intended for
home use only. Do not use the elliptical
exerciser in a commercial, rental, or institutional setting.
4. Keep the elliptical exerciser indoors, away
from moisture and dust. Place the elliptical
exerciser on a level surface, with a mat
beneath it to protect the floor or carpet.
Make sure that there is enough clearance
around the elliptical exerciser to mount, dismount, and use it.
5. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
6. Keep children under age 12 and pets away
from the elliptical exerciser at all times.
7. The elliptical exerciser should not be used
by persons weighing more than 275 lbs.
(124 kg).
WARNING: Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or
property damage sustained by or through the use of this product.
8. Wear appropriate exercise clothes while
using the elliptical exerciser. Always wear
athletic shoes for foot protection while exercising.
9. Hold the handgrip pulse sensor or the upper
body arms when mounting, dismounting, or
using the elliptical exerciser.
10. The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determining heart rate trends in general.
11. Keep your back straight while using the elliptical exerciser; do not arch your back.
12. If you feel pain or dizziness while exercising,
stop immediately and cool down.
13. When you stop exercising, allow the pedals
to slowly come to a stop.
14. The warning decals shown on page 4 have
been placed on the elliptical exerciser in the
locations shown. If a decal is missing or
illegible, call the toll-free telephone number
on the front cover of this manual and order
a free replacement decal. Apply the decal in
the location shown.
26
3
BEFORE YOU BEGIN
Congratulations for selecting the advanced
ordicTrack
N
The AUDIOSTRIDER 600 elliptical exerciser provides
a wide array of features designed to make your workouts at home more effective and enjoyable—and
when youʼre not exercising, the unique elliptical exerciser can be folded out of the way.
For your benefit, read this manual carefully before
you use the elliptical exerciser. If you have ques-
®
UDIOSTRIDER 600 elliptical exerciser.
A
Upper Body Arm
tions after reading this manual, please see the front
over of this manual. To help us assist you, note the
c
product model number and serial number before contacting us. The model number is NTEL7506.2. The
serial number can be found on a decal attached to the
elliptical exerciser (see the front cover of this manual
for the location of the decal).
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Fan
ey No. Qty.DescriptionKey No. Qty.Description
K
912M10 x 60mm Button Bolt
929#8 x 1/2" Blunt Screw
934M10 x 80mm Button Screw
Note: “*” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
984M8 x 16mm Patch Screw
994M10 Washer
1001Side Shield Fastener
*
*2Hex Key
*2Grease Packet
1Userʼs Manual
REAR
Pedal Disc
Console
Water Bottle Holder*
Pulse Sensor
FRONT
Wheel
Pedal
Latch Button
Handle
RIGHT SIDE
*No water bottle is included
4
25
PART LIST—Model No. NTEL7506.2R
M8 Split
Washer (97)–10
Wave Washer
(80)–2
M10 Nylon
Locknut (82)–2
#8 x 1/2"
Screw (81)–2
M10 Split
Washer (99)–4
M10 x 80mm Button Screw (93)–4
Large Wave
Washer (89)–4
M8 x 40mm Button
Screw (90)–6
M8 x 20mm Patch
Screw (86)–6
M8 x 20mm Button
Screw (85)–4
M8 x 16mm Patch
Screw (84)–6
M8 x 23mm
Washer (31)–18
#8 x 1/2" Blunt
Screw (92)–9
#8 x 3/4"
Screw (78)–16
0909A
ASSEMBLY
Key No. Qty.DescriptionKey No. Qty.Description
101Upright
111Console
122Disc
132Disc Cover
141Left Side Shield
151Right Side Shield
164Stabilizer Endcap
172Wheel
182Link Axle
191Left Upright Cover
201Right Upright Cover
212Pivot Bushing
221Left Upper Body Arm
231Right Upper Body Arm
241Left Upper Body Leg
251Latch Axle
261Left Rear Upper Body Cover
271Left Front Upper Body Cover
281Right Rear Upper Body Cover
291Right Front Upper Body Cover
302Link Arm
3118M8 x 23mm Washer
322Pedal Arm
338M6 Washer
341Left Pedal
351Right Pedal
361Left Frame Cover
371Right Frame Cover
381Latch Spring
392Pedal Arm Cover
401Center Foot
411Latch Button
424Link Bearing
432Link Arm Pad
441Eddy Mechanism
451Eddy Crank Assembly
11Frame
2
31Rear Stabilizer
41Front Stabilizer
51Left Pedal Bracket
61Right Pedal Bracket
74Upper Bushing Assembly
82Upper Body Arm Endcap
92Upper Body Leg Spacer
1Folding Frame
461Pillow Block
71Idler
4
481Idler Pulley
491Eddy Motor
501Reed Switch/Wire
511Clamp
522Large Axle Cover
534Pivot Arm Bushing
544Link Snap Ring
552Crank Arm
561Crank Arm Spacer
571Large Pulley
582Crank Flange
592Crank Bearing Assembly
601Crank Spacer
611Crank
622Crank Snap Ring
632Flange Screw
641Lower Wire Harness
651Upper Wire Harness
662Axle Cover
674Bushing Assembly
682Brass Bushing
691Latch Bracket
701Pivot Axle
711Upper Body Axle
721Right Upper Body Leg
732Upper Body Leg Endcap
741Belt
752Foam
761Frame Cap
772Transfer Handle Endcap
7816#8 x 3/4" Screw
794#8 x 3/4" Flat Head Screw
802Wave Washer
8114#8 x 1/2" Screw
824M10 Nylon Locknut
838M6 x 12mm Button Screw
846M8 x 16mm Patch Screw
8514M8 x 20mm Button Screw
866M8 x 20mm Patch Screw
874M8 x 32mm Button Screw
885M8 x 25mm Bolt Set
894Large Wave Washer
906M8 x 40mm Button Screw
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included hex keys and your own phillips screwdriver,
adjustable wrench, and rubber mallet.
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassem-
bled. If a part is not in the parts bag, check to see if it has been preassembled.
24
5
Loading...
+ 9 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.