Fig 14 View of Plug and Play Handsfree Cigarette Charger, PPH-1 .................................17
Fig 15 View of Handsfree Microphone, HFM-8.................................................................18
Fig 16 View of Headset, HDE-2..........................................................................................19
Fig 17 View of Headset, HDC-5 .........................................................................................20
Fig 18 View of Loopset, LPS-3...........................................................................................21
Issue 1 10/01ãNokia CorporationPage 3
Page 4
NPW-1
AccessoriesPAMS Technical Documentation
Standard Battery BLC-2
The BLC-2 is a Li-ION type battery with a rating of 850mAH.
Product Code
Battery pack BLC-2:0670343
Figure 1: View of Standard Battery, BLC-2
Page 4ãNokia CorporationIssue 1 10/01
Page 5
NPW-1
PAMS Technical DocumentationAccessories
BMC-2 Battery Pack
The BMC-2 is a Ni-MH type battery with a rating of 640mAH.
Product Code
BMC-2 Battery Pack: 0670323
Figure 2: View of BMC-2 Batt er y Pack
Issue 1 10/01ãNokia CorporationPage 5
Page 6
NPW-1
AccessoriesPAMS Technical Documentation
Battery Pack BMC-3
The BMC-3 is a NiMH type battery with a rating of 900mAH.
Product Code
Battery pack BMC-3: 0670324
Figure 3: View of Battery Pack, BMC-3
Page 6ãNokia CorporationIssue 1 10/01
Page 7
NPW-1
S0001160
PAMS Technical DocumentationAccessories
AC Travel Charger ACP-7
The standard charger is available for different voltage le vels and comes with different
wall plugs. The standard charger can also be used as a power supply for the desktop
stand.
Figure 4: View of AC Travel Charger, ACP-7
ACP-7E
ACP-7C
ACP-7P
ACP-7U
ACP-7H
ACP-7X
ACP-7A
Product Codes
AC Travel Charger(Europlug) 207-253 VacACP-7E 0675144
AC Travel Charger(USplug) 108-132 VacACP-7U 0675143
AC Travel Charger(USplug) 198-242 VacACP-7P 0675147
AC Travel Charger(USplug) 198-242 VacACP-7C 0675158
AC Travel Charger(UKplug) 207-253 VacACP-7X 0675145
AC Travel Charger(UKplug) 180-220 VacACP-7H 0675146
AC Travel Charger
Specification
Output connectors:3.5 mm DC plug, 2-pole
Protection:PTC protection
(Australia) 216-264 VacACP-7A 0675148
Output Voltage /Current (typ)7.6 V / 370 mA
Issue 1 10/01ãNokia CorporationPage 7
Page 8
NPW-1
ACP-8E
ACP-8U
AccessoriesPAMS Technical Documentation
Performance Travel Charger ACP-8
Operating within the voltage range 90 V...264 V AC (50 Hz...60 Hz), the Performance
Travel Charger is practically current independent in normal office and household use.
Like the standard charger, it is compatible with all batt ery options and is available for
different wall sockets.
The Performance Travel Charger can also be used with desktop stand.
Figure 5: View of Performance Travel Charger, ACP-8
US plug 90-264 Vac0675196
China plu g 90-264 Vac0675211
Australia plug 90-264 Vac0675214
Output connectors: 3.5 mm DC plug, 2-pole (+, -, control)
Protection: Output fault voltage 16 V max.
Output voltage/current (typ): 6.0 V (+0.3 V)/ 620 mA
Page 8ãNokia CorporationIssue 1 10/01
Page 9
NPW-1
PAMS Technical DocumentationAccessories
Fast Travel Charger ACP–9
Operating within the voltage range 90 V...264 V AC (50 Hz...60 Hz), the Fast Travel
Charger is practically current independent in nor mal office and house-hol d use. Like the
standard charger, it is compatible with all battery opt ions and is available for different
wall sockets.
The Fast Travel Charger can also be used with basic stand and desktop stand.
Figure 6: View of Fast Travel Char ger, ACP-9
ACP-9E
Product Codes
Fast Travel Charger (Euro plug) 90–264 Vac ACP–9E 0675149
Fast Travel Charger (US plug) 90–264 Vac ACP–9U 0675151
Fast Travel Charger (UK plug) 90–264 Vac ACP–9X 0675150
Fast Travel Charger (Austral i a) 90–264 Vac ACP–9A 0675152
Output cable PCC–1 (supplied with ACP–9): 0730076
ACP-9U
ACP-9X
ACP-9A
Specification
Output connectors:3.5 mm DC plug, 3–pole (+, –, control)
Protection: output current limiting, max. 850 mA
output voltage limiting, max. 9.3 V (unloaded)
Output voltage/current (typ): 8.4 V / 800 mA
Issue 1 10/01ãNokia CorporationPage 9
Page 10
NPW-1
AccessoriesPAMS Technical Documentation
Battery Charging Stand DDC-1
Supports both Li-Ion and Ni-MH batteries (charges following DCT-4 semi-fixed batteries:
BLB-2, BLB-3, BLL-2, BMC-2, BMC-3 and BLC-2). LED to indicate charging status: green,
ready (trickle charging); red, fast char ging; ra pid green and red a lte rnat ely (the c hargi ng
is disabled due to battery temperature, i.e. battery outside the temperature range). Compatible chargers: Standard Charger ACP-7, Travel Charger ACP-8, Performance Travel
Charger ACP-9.
Figure 7: View of Battery Ch arg ing St and, DDC-1
Product Code
Battery Charging Stand DDC-1: 0675243
Specifications
Dimensions (H x W x D):31 x 62 x 105.5 mm
Weight:97 g
Page 10ãNokia CorporationIssue 1 10/01
Page 11
NPW-1
PAMS Technical DocumentationAccessories
Desktop Stand DCV-10
The desktop stand provides mounting place for charging battery with transceiver.
Figure 8: View of Desktop Stand, DCV-10
Product Code
Desktop stand DCV-10: 0675229
Specification
Connections: 3.5 mm DC jack (ACP-7 or ACP-8)
Issue 1 10/01ãNokia CorporationPage 11
Page 12
NPW-1
AccessoriesPAMS Technical Documentation
Mobile holder MBC-6
In car phone holder, typically mounted to dashboard using mounting plate MKU- 1 or
swivel mount HHS-9.
Figure 9: View of Mobile Holder, MBC-6
Product Code
Mobile Holder MBC-6: 0650026
Specifications
Dimensions (H x W x D):70 x 75 x 43 mm
Weight:50 g
Page 12ãNokia CorporationIssue 1 10/01
Page 13
NPW-1
PAMS Technical DocumentationAccessories
Mounting Plate MKU–1
The MKU–1 mounting plate provides a method of fixing the phone holder, the basic
handsfree unit or the handset to the vehicle interior.
Product Code
Mounting plate MKU–1: 0620036
Figure 10: View of Mounting Plate, MKU-1
Issue 1 10/01ãNokia CorporationPage 13
Page 14
NPW-1
AccessoriesPAMS Technical Documentation
Swivel Mount HHS-9
The HHS–9 swivel mounting plate provides an alternative (to MKU–1) method of locating
the phone holder, the handsfree unit or the handset.
Product Code
Swivel mounting plate HHS–9: 0620037
Figure 11: View of Swivel Mount, HHS-9
Page 14ãNokia CorporationIssue 1 10/01
Page 15
NPW-1
PAMS Technical DocumentationAccessories
Cigarette Lighter Charger LCH-8
A green light indicates that the cigarette lighter charger is ready for charging. Check the
charging status on the phone display. T he main use is with 12V vehicle sy stem. It is using
3-wire charging structure (controlled constant voltage). It has internal output current
limitation of 650mA.
The car battery connectors must perform reliable electrical connection to t he cigarette
lighter socket.
Figure 12: View of Cigarette Charger, LCH-8
Product Code
Cigarette lighter charger LCH-8: 0675231
Specification
Output connectors:3.5 mm DC plug, 3 pin.
Protection:input fused, output current limit 650 mA
Voltage:
• input:10.8...32 V
• output:This is controlled by the phone via 3:rd wire.
Issue 1 10/01ãNokia CorporationPage 15
Page 16
NPW-1
AccessoriesPAMS Technical Documentation
Cigarette Lighter Charger LCH-9
A green light indicates that the cigarette lighter charger is ready for charging. Check the
charging status on the phone display. The input voltage can be from 11 or 32 V d.c., negative grounding.
Universal mobile charger can be used with all car acce ssories provided for your phone
except MCC-1.
Figure 13: Cigarett e Lighter Charger, LCH-9
Product Code
Cigarette lighter charger LCH-9: 0675120
Specification
Connectors
Protection: input fused, output current limit 850 mA
Voltage
Nominal output current:800 mA
• input: D 21/23 mm
• output: 3.5 mm DC plug
• input:11...32 V
• output (nominal): 8.4 V
Page 16ãNokia CorporationIssue 1 10/01
Page 17
NPW-1
PAMS Technical DocumentationAccessories
Plug and Play Handsfree Cigarette Charger PPH-1
The PPH-1 provides rapid charging for t he phone and possibility for HF operation. The
PPH-1 plug and play handsfree unit is connected directly to the cigarette lighter in a car.
PPH-1 is connected to Mobile phone with the cable. The cable has combined connector
with charger - and head set connectors.
Figure 14: View of Plug and Play Handsfree Cigarette Charger, PPH-1
Product Code
Headset PPH-1: 0675182
Specification
Output connectors: 3.5 mm DC plug, 2-pole (+, -, control)
Input voltage: 8-16VDC
Protection: Output fault voltage 16 V max.
Output current: 750 mA max.
Issue 1 10/01ãNokia CorporationPage 17
Page 18
NPW-1
AccessoriesPAMS Technical Documentation
Handsfree Microphone HFM-8
The HFM-8 microphone can be used together with PPH-1 plug and play handsfree unit.
Product Code
Handsfree microphone HFM-8: 0690016
Figure 15: View of Handsfree Microphone, HFM-8
Page 18ãNokia CorporationIssue 1 10/01
Page 19
NPW-1
PAMS Technical DocumentationAccessories
Headset HDE-2
Headset connected directly to the phone via a 4-wire 2.5 mm headset jac k (compatible
with phones using DCT-4 headset connector).
Figure 16: View of Headset, HDE-2
Product Code
Headset: 0694075
Specification
Weight:14 g
Length of cable1050 ± 50 mm
Issue 1 10/01ãNokia CorporationPage 19
Page 20
NPW-1
AccessoriesPAMS Technical Documentation
Headset HDC-5
The HDC-5 headset provides a also hook switch for the phone/micro phone.
Product Code
Headset HDC-5: 0694059
Figure 17: View of Headset, HDC-5
Page 20ãNokia CorporationIssue 1 10/01
Page 21
NPW-1
PAMS Technical DocumentationAccessories
Loopset LPS-3
The LPS-3 Loopset has been developed for hearing aid users to allow them to use mobile
phones. It is based on induction technology.
All hearing aids have support for induction loop, that is, they have a little tele-coil inside.
This coil can capture the signal suppli ed to the loop. Standard hearing aids have two
operation modes: (1) the M-mode for normal micr ophone use and (2) the T-mode for
tele-coil.
Figure 18: Vie w of Loopset, LPS-3
Product Code
Loopset LPS-3: 0630244
Recommended Batteries
Table 1: Recommended Batteries
TypeSize / IEC-typeRated
capacity
Zinc Air Hearing Aid Battery
Silver Oxide Hearing Aid
Battery
Alkaline Battery675 / LR44110 mAh 36 hour.5 500 hour or
675 / PR44540 mAh180 hour. 840 hour or
675 / SR44150 mAh 50 hour.7 500 hour or
Note: The capacity of the zinc air battery will fall 20% in a month. After the activa-
tion, the zinc air battery begins to self-discharge. The battery will be empty
within 5 weeks.
Talk time
(3mA load)
35 day (1)
310 day.
230 day.
Standby
(20uA load)
Issue 1 10/01ãNokia CorporationPage 21
Page 22
NPW-1
AccessoriesPAMS Technical Documentation
Page 22ãNokia CorporationIssue 1 10/01
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.