Nissan Z ROADSTER 2018 08IT Navigation Manual
2018 NAVIGATION
SYSTEM
OWNER’S MANUAL
For your safety, read carefully and keep in this vehicle.
NISSAN NAVIGATION SYSTEM
HELPDESK CONTACT INFORMATION
For assistance or inquiries about the
NISSAN Navigation System, or to order
updated map data, contact the NISSAN
NAVIGATION SYSTEM HELPDESK at:
. ADDRESS: P.O. Box 1588, Orem, UT
84059-992
. E-MAIL: nissan-navi-info@here.com
. WEB SITE:http://www.nissannaviga-
tion.com or www.nissan.ca
. PHONE: 1-888-661-9995
. HOURS: 6:00 AM to 5:00 PM (Pacific
Time)
NISSAN CONSUMER AFFAIRS DEPARTMENT
For assistance or inquiries about the
NISSAN warranty, service or general questions, contact the NISSAN Consumer Affairs Department at:
For U.S. customers
Nissan North America, Inc.
Consumer Affairs Department
P.O. Box 685003
Franklin, TN 37068-5003
1-800-NISSAN-1
(1-800-647-7261)
For Canadian customers
Nissan Canada Inc.
5290 Orbitor Drive
Mississauga, Ontario L4W 4Z5
1-800-387-0122
Thank you for purchasing a NISSAN
vehicle.
This user’s manual is for the navigation
system only. This manual contains operating instructions for the NISSAN Navigation System offered in your NISSAN
vehicle.
Please read this manual carefully to ensure safe operation of the navigation
system.
. Because of possible specification
changes and optional equipment, sections of this manual may not apply to
your vehicle.
. All information, specifications and il-
lustrations in this manual are those in
effect at the time of printing. NISSAN
reserves the right to change specifications or design at any time without
notice.
. Do not remove this manual from the
vehicle when selling this vehicle. The
next user of this navigation system
may need the manual.
FOREWORD
1
2
3
4
5
6
7
8
9
10
11
12
Contents
Introduction
Getting started
Map settings
Setting destination
Route guidance
Storing location/route
Viewing technical information
Other settings
Voice recognition
General system information
Troubleshooting guide
Index
1 Introduction
How to use this manual............................................................ 1-2
For safe operation .................................................................. 1-2
Reference symbols ................................................................. 1-2
Safety information ......................................................................... 1-2
Laser product .................................................................................... 1-3
HOW TO USE THIS MANUAL SAFETY INFORMATION
This manual uses special words, symbols
and icons that are organized by function.
Please refer to the following items to
understand how to use this manual
properly.
FOR SAFE OPERATION
WARNING
Indicates the presence of a hazard
that could cause death or serious
personal injury. To avoid or reduce
the risk, the procedures must be
followed precisely.
CAUTION
Indicates the presence of a hazard
that could cause minor or moderate
personal injury or damage to your
vehicle. To avoid or reduce the risk,
the procedures must be followed
carefully.
NOTE:
Indicates items that help you understand and maximize the performance
of your vehicle. If ignored, they may
lead to a malfunction or poor performance.
REFERENCE SYMBOLS
INFO:
Indicates information that is necessary
for efficient use of your vehicle or accessories.
Reference page:
Indicates the title and page that you
should refer to.
<>:
Indicates a button on the control panel.
[]:
Indicates a key/item displayed on the
screen.
Voice Command:
Indicates an operation by voice command.
Variable commands, such as numbers,
are indicated in
italics
in parentheses < >.
This system is primarily designed to help
you reach your destination, and it also
performs other functions as outlined in
this manual. However, you, the driver,
must use the system safely and properly.
Information concerning road conditions,
traffic signs and the availability of services
may not always be up to date. The system
is not a substitute for safe, proper and
legal driving.
Before using the navigation system,
please read the following safety information. Always use the system as outlined in
this manual.
WARNING
. To operate the navigation system
or use the multi-function controller, first park the vehicle in a safe
location and set the parking
brake. Operating the system
while driving can distract the
driver and may result in a serious
accident.
. Do not rely on route guidance
alone. Always be sure that all
driving maneuvers are legal and
safe in order to avoid accidents.
1-2 Introduction
LASER PRODUCT
. Do not disassemble or modify
this system. If you do, it may
result in accidents, fire or electrical shock.
. If you notice any foreign objects
in the system hardware, spill
liquid on the system or notice
smoke or a smell coming from it,
stop using the system immediately. It is recommended you visit
a NISSAN dealer for servicing.
Ignoring such conditions may
lead to accidents, fire or electrical
shock.
CAUTION
. Do not use this system if you
notice any malfunctions such as
a frozen screen or the lack of
sound. Continued use of the system may result in accidents, fire
or electrical shock.
. Some jurisdictions may have laws
limiting the use of video screens
while driving. Use this system
only where it is legal to do so.
. Extreme temperature conditions
[below −4°F (−20°C) and above
158°F (70°C)] could affect the performance of the system.
. The glass display screen may
break if it is hit with a hard or
sharp object. If the glass screen
breaks, do not touch it. Doing so
could result in an injury.
NOTE:
Do not keep the navigation system
running with the engine stopped. Doing
so may discharge the vehicle battery.
When you use the navigation system,
always keep the engine running.
This navigation system is certified as a
Class 1 laser product.
The navigation system complies with
DHHS Rules 21 CFR Chapter 1, Subchapter
J.
WARNING
. Do not disassemble or modify
this system. There are no user
serviceable parts in this navigation system.
. If maintenance, adjustments and
operations other than those specified in this manual are attempted, injury due to laser
radiation and exposure could occur.
Required SiriusXM Satellite Radio and
NavTraffic monthly subscriptions are sold
separately. NavTraffic are only available in
select markets. For more information,
see www.siriusxm.com/navtraffic.
Introduction 1-3
Required SiriusXM Satellite Radio and
NavWeatherXM monthly subscriptions
are sold separately. NavWeatherXM is only
available in select markets. For more
information,
see www.siriusxm.com/navweather.
1-4 Introduction
2 Getting started
Control buttons and functions .......................................... 2-2
Control panel ............................................................................. 2-2
Multi-function controller .................................................. 2-3
Steering wheel switch......................................................... 2-4
Starting the system ..................................................................... 2-5
Navigation system status screen ..................................... 2-5
Functions disabled while driving ...................................... 2-6
Menu screen and how to operate ................................... 2-8
Menu screens and their purposes ............................ 2-8
Using controls to adjust values, levels, etc. ....... 2-9
Start menu ................................................................................. 2-10
List screen ................................................................................... 2-11
Touch panel operation ........................................................... 2-12
Example of touch panel operation ......................... 2-12
How to input letters and numbers ............................... 2-13
Character (letters and numbers)
input screen .............................................................................. 2-13
Number input screen......................................................... 2-14
Map menu screen ...................................................................... 2-15
Current location map screen ................................... 2-15
Scrolled location map screen ................................... 2-16
Storing home location/address ...................................... 2-16
How to store home location ..................................... 2-16
Setting destination .................................................................... 2-18
Searching for destinations ......................................... 2-18
Starting route guidance ............................................... 2-19
Canceling route ................................................................... 2-19
Operating maps .......................................................................... 2-20
How to view map screen ............................................ 2-20
Setting voice guidance .......................................................... 2-21
Turning voice guidance ON/OFF ........................... 2-21
Adjusting voice guidance volume ........................ 2-22
NISSAN voice recognition .................................................... 2-23
Using the system ............................................................... 2-23
Before starting ..................................................................... 2-24
Giving voice commands............................................... 2-24
Command list ....................................................................... 2-26
CONTROL BUTTONS AND
FUNCTIONS
CONTROL PANEL
Type A (if so equipped)
Type B (if so equipped)
2-2 Getting started
<STATUS>:
Push multiple times to display audio
information with either the air conditioner status, fuel economy or navigation directions.
<DEST>:
Push to enter a destination. Various
methods for entering a destination
are available.
“4. Setting destination”
<ROUTE>:
Push to access guidance control
functions (guidance cancellation,
route priority, waypoint setting on
the route, etc.).
Multi-function controller:
Turn to highlight an item on the
screen, push to select the highlighted
item or scroll the map.
<INFO>:
Push to display the vehicle, traffic,
weather or voice recognition information.
<DAY/NIGHT OFF> OFF:
Push to switch between the day
screen (bright) and the night screen
(dark). Push and hold to turn off the
display. Push again to turn on the
display.
<SETTING>:
Push to access the system settings.
<VOICE>:
Push to hear the current guidance for
a programmed route.
<BACK>:
Push to return to the previous screen.
In a settings screen, this button can
also be used to apply the setting.
In a character input screen, this
button can also delete the characters
that have been entered.
<MAP>:
Push to display the map. While follow-
ing programmed route, push multiple
times to change the type of route
information.
<ZOOM IN>, <ZOOM OUT>:
Push to switch to the zoom mode to
change the map scale.
INFO:
. If <BACK> needs to be pushed to
apply the setting on a settings screen,
this manual will explicitly include a
step for this procedure. Otherwise,
pushing <BACK> returns the display
to the previous screen.
. The layout of the control panel
switches may vary depending on the
vehicle model and equipment.
MULTI-FUNCTION CONTROLLER
With Directional buttons
<ENTER>:
Push to select the highlighted item
on the screen.
If this button is pushed while a map is
displayed, the map menu screen is
displayed.
Main directional buttons:
Use to move across the map, high-
light an item on the screen or adjust a
setting (volume, brightness, etc.).
Getting started 2-3
Additional directional buttons:
Use to move across the map or
highlight an item on the character
input screen.
Center dial:
Turn to highlight an item on the
screen or adjust a setting.
Turn the center dial on the map
screen. The map scale is displayed.
Use the center dial to adjust the map
scale.
Without Directional buttons
Center dial/Slide switch:
Center dial
Turn to highlight an item on the
screen or adjust a setting.
The center dial can also be used to
adjust the map scale.
Slide switch
Slide (push upward/downward/left-
ward/rightward) to select an item on
the screen or to adjust a setting
(volume, brightness, etc.)
The map can be scrolled in 8 directions by sliding this switch.
STEERING WHEEL SWITCH
<ENTER>:
Push to select the highlighted item
on the screen.
If this button is pushed while a map is
displayed, the map menu screen is
displayed.
Type A (if so equipped)
2-4 Getting started
Type B (if so equipped)
<ENTER>:
Tilt to highlight an item on the screen
or adjust a setting. Push to select the
highlighted item.
If this button is pushed while a map is
displayed, the map menu screen is
displayed.
“Map menu screen” (page 2-15)
Push and hold while a map or status
screen is shown to display the Start
Menu.
“Start menu” (page 2-10)
If this button is tilted up while the
audio function is activated and the
map or status screen is displayed, the
audio system can be operated.
STARTING THE SYSTEM
NAVIGATION SYSTEM STATUS
SCREEN
< >:
Push this button during a setting
operation to return to the previous
screen. In a settings screen, this
button can also be used to apply
the setting.
<− +>:
Use to adjust the volume. These
buttons have the same function as
that of the volume control knob.
Refer to the vehicle Owner’s Manual.
<TALK >:
Push to start the voice recognition
mode. If the voice recognition mode
is already activated, pushing this
button cancels the voice guidance
and you can speak a voice command
immediately.
< >:
Push to display the phone mode
screen.
Refer to the vehicle Owner’s Manual.
<SOURCE> :
Use to switch the audio mode
(source).
Refer to the vehicle Owner’s Manual.
The navigation system starts when the
ignition switch is placed in the ACC or ON
position.
NOTE:
Do not keep the navigation system on
with the engine stopped. Doing so may
discharge the vehicle battery. When you
use the navigation system, always keep
the engine running.
By pushing <STATUS> at anytime, you
can display a split screen with audio
information that is always at the top.
Each time <STATUS> is pushed, the
bottom part of the screen changes between air conditioner, fuel economy or
navigation directions.
INFO:
There are different status screens displayed depending on various factors,
such as the currently active mode,
whether a destination has been set or
not, etc.
When a route to the destination is set and
the audio system is on, a screen similar to
the one above appears.
Turning direction at the next intersection
Getting started 2-5
Name of the next street
Distance to the next intersection
Distance remaining to the destination
Remaining time to the destination
When a route to the destination is not set
and the audio system is off, a screen
similar to the one above appears.
FUNCTIONS DISABLED WHILE
DRIVING
2-6 Getting started
To ensure safe driving, some functions
cannot be operated or have limited
operation when the vehicle driving speed
is above 5 MPH (8 km/h).
The on-screen text and keys for these
restricted functions will be "grayed-out"
or muted and cannot be selected while
driving. In some cases, a screen message
will appear indicating a restricted function.
Restricted functions while driving include:
. Character (letter and number) input
screen during destination entry (street
address, phone number, freeway entrance/exit, intersection, city center)
. Places search by name and city name
. Scrolling and viewing of certain navi-
gation lists
. Adding/editing address book entries
. Adding/editing home location
. Storing current position, information,
destinations
These functions will become available
again when the vehicle speed is reduced
to 5 MPH (8 km/h).
Destination functions available while driving include:
. Home
. Address Book
. Previous Destinations
. Nearby places
. Address book
. My places
. Map input
Getting started 2-7
MENU SCREEN AND HOW TO
OPERATE
MENU SCREENS AND THEIR PURPOSES
Push <DEST>, <ROUTE>, <INFO> or
<SETTING> to display the corresponding
menu screen.
How to select a menu item
Example: <DEST> screen
1. Highlight the preferred menu item
using the multi-function controller.
2. To select the preferred menu item,
highlight the item and push <ENTER>.
The next screen is displayed.
2-8 Getting started
3. Push <BACK> to return to the previous
screen without applying any changes.
Push <MAP> to return to the current
location map screen without applying
any changes.
INFO:
An item can also be selected by tilting
<ENTER> on the steering wheel up and
down.
USING CONTROLS TO ADJUST VALUES, LEVELS, ETC.
With directional buttons
Getting started 2-9
Without directional buttons
There are five main methods to control
the navigation system: the center dial, the
main directional buttons, the slide switch,
the touch panel and the switches on the
steering wheel. Use these controls to
adjust the volume of the phone and voice
guidance, the display brightness, etc.
How to adjust
1. Highlight the preferred setting item
and push <ENTER>. The color of the
corresponding adjustment item
changes.
2. Adjust the value or level of the indicator bar using the multi-function
controller.
3. Push <ENTER> or <BACK> to apply the
setting.
INFO:
. The volume of phone and voice gui-
dance, the display brightness, etc. can
be adjusted by tilting <ENTER> on the
steering wheel up and down.
. These same adjustments can also be
performed using the touch panel
operation.
“Adjusting volume and others”
(page 2-12)
START MENU
The start menu can be displayed using
the steering wheel switch.
1. Push and hold <ENTER> on the steering wheel.
2. Highlight the preferred item and push
<ENTER>.
INFO:
<ENTER> on the steering wheel switch
can be used to display the start menu
only when the map or status screen is
displayed.
2-10 Getting started
Available items
. [Destination]:
Displays the destination screen. It is
the same screen that appears when
<DEST> is pushed.
“4. Setting destination”
. [Route]:
Displays the route screen. It is the
same screen that appears when
<ROUTE> is pushed.
“5. Route guidance”
. [Info]:
Displays the information screen. It is
the same screen that appears when
<INFO> is pushed.
“7. Viewing technical information”
. [Settings]:
Displays the settings screen. It is the
same screen that appears when
<SETTING> is pushed.
“8. Other settings”
LIST SCREEN
After searching for a point of interest, a
list screen is displayed.
Depending on the list displayed, it can be
sorted.
Items displayed in a list
Highlight the preferred item from the
list and push <ENTER> to select it. If a
location or facility name is not completely displayed (due to length),
highlight the item to display the
hidden part of the name.
Distance from the current location
Direction to the point of interest
If the entire list cannot be displayed
on the screen, the system displays
the total number of items in the list
and the entry number of the selected
item. Scroll the list using the multifunction controller.
An item that starts with the selected
letter will be displayed at the top of
the list.
Getting started 2-11
TOUCH PANEL OPERATION
Highlight and push <ENTER> to sort
the list in the original order.
When the list is sorted by the shortest
distance, the selected location can be
confirmed in the preview on the right
side of the screen.
Highlight and push <ENTER> to modify search conditions.
With this system, the same operations as
those for the multi-function controller are
possible using the touch panel operation.
This manual describes the operations
using the multi-function controller.
For the operations that differ from those
of the multi-function controller and for
useful methods for using the touch panel
operation, refer to each section.
EXAMPLE OF TOUCH PANEL OPERATION
Here, the operation examples performed
with the touch panel operation are described.
Selecting item
When the item is touched, the next screen
is displayed.
Adjusting volume and others
Touch [+] or [−] located on the right and
left of the bar graph to perform the
adjustment.
Scrolling message or list
Touch [ ]or[ ] to scroll the message
or list.
Touch [
page.
]or[ ] to skip to the next
2-12 Getting started
HOW TO INPUT LETTERS AND
NUMBERS
Inputting letters and numbers
1. Touch the letter or number.
2. To delete a character, touch [Delete].
Push and hold [Delete] to delete all of
the characters.
CHARACTER (letters and numbers)
INPUT SCREEN
When setting a destination, searching for
a facility or editing the stored locations,
etc. alphanumeric characters must be
entered into the system.
1. Use the multi-function controller to
highlight a character on the displayed
keyboard.
2. Push <ENTER>. The highlighted character is entered.
3. Push <BACK>, or highlight [Delete] and
push <ENTER> to delete the last
character entered.
Push and hold <BACK> to delete all
the characters entered.
Highlight [Space] and push <ENTER>
to enter a space.
4. After finishing the entry, highlight [List]
and push <ENTER>.
Getting started 2-13
INFO:
. Push <BACK> on the control panel to
return to the previous screen, but only
after deleting all the characters entered.
. When [BACK] is touched on the screen,
the screen returns to the previous
screen even when characters have
been entered.
. When text has been entered and the
number of matching list items has
been narrowed down enough so that
they fit on the screen, the list screen
appears automatically.
Symbol input screen
INFO:
Symbol keys are displayed by highlighting
[Symbols] and pushing <ENTER>. Alphabet keys are displayed by highlighting [AZ] and pushing <ENTER>.
NUMBER INPUT SCREEN
A phone number or a street number can
also be entered as a search method to
look for a destination.
INFO:
Only the locations included in the map
data database can be searched for by a
phone number.
1. Use the multi-function controller to
highlight a number on the displayed
keyboard.
2. Push <ENTER>. The highlighted number is entered.
3. Push <BACK>, or highlight [Delete] and
push <ENTER> to delete the last
number entered.
Push and hold <BACK> to delete all
the numbers entered.
4. After finishing the entry, highlight [List]
and push <ENTER>.
2-14 Getting started
MAP MENU SCREEN
INFO:
. <BACK> can be pushed on the control
panel to return to the previous screen,
but only after deleting all the numbers
entered.
. When [BACK] is touched on the screen,
the screen returns to the previous
screen even when numbers have
been entered.
Push <ENTER> while the current location
map screen or a scrolled map screen is
displayed to display the menu corresponding to that screen.
This menu can be used to access helpful
functions quickly, such as setting a destination and searching for points of interest nearby.
To select a menu item, use the method
described earlier in this manual.
“Menu screen and how to operate”
(page 2-8)
INFO:
With the touch operation, the same
screen can be displayed by touching
[Map Menu] located on the map screen.
CURRENT LOCATION MAP SCREEN
If <ENTER> is pushed while the current
location map screen is displayed, the
following options are available.
. [Store Location]:
Store the current vehicle location in
the Address Book. The stored location
can be retrieved as necessary to set it
as a destination (waypoint).
“Storing location” (page 6-2)
. [Nearby Places]:
Search for points of interest near the
current vehicle location, such as restaurants and gas stations, etc.
“Finding nearby place” (page 4-5)
. [Map View]:
Perform map operations such as the
switching of map type and the setting
of map orientation and scale.
“3. Map settings”
. [Map Icons]:
Select map icons of certain points of
interest (such as restaurants and gas
stations, etc.) to be displayed on the
map around the current vehicle location.
“Displaying map icons” (page 3-17)
. [Store Tracking]:
Store in the Address Book the route
travelled from the starting point to the
current location.
“Storing tracked route” (page 6-6)
Getting started 2-15
STORING HOME LOCATION/
ADDRESS
SCROLLED LOCATION MAP SCREEN
If <ENTER> is pushed while a scrolled map
screen is displayed, the following options
are available.
. [New Dest.]:
Set the destination to the map location where <ENTER> was pushed. If a
destination is already set, the location
will be set as the new destination.
“Setting point on map”
(page 4-19)
. [Add to Route]:
Set the map location where <ENTER>
was pushed as a destination or a
waypoint.
This is available only when the suggested route is already set.
“Setting destination or waypoint”
(page 5-14)
. [Nearby Places]:
Search for points of interest near the
map location where <ENTER> was
pushed and set them as a destination
or waypoint.
Use the same search method as the
one for [Places].
“Finding nearby place” (page 4-5)
. [Store Location]:
Store in the Address Book the map
location where <ENTER> was pushed.
The stored location can be retrieved
to set it as a destination or waypoint.
“Storing location” (page 6-2)
. [Delete]:
Delete a stored location. To delete it,
place the cross pointer over the corresponding icon.
. [Incident Detail]:
This function can be selected only
when the traffic information icon is
displayed.
Display the details of the traffic information icon.
Place the cross pointer over the icon
you want to check.
INFO:
Incident details are a feature of Traffic
Information, and that a NavTraffic subscription is required in order to receive
Traffic Information.
2-16 Getting started
HOW TO STORE HOME LOCATION
If a home location is already stored in the
Address Book, it can be easily retrieved to
set the route to the stored home location.
The procedure to store the home location
is the same as for storing any other
location.
“4. Setting destination”
As an example, the procedure for storing
the home location by searching for a
destination by address is described here.
1. Push <DEST>.
2. Highlight [Home (Add New)] and push
<ENTER>.
3. A confirmation message is displayed.
Confirm the contents of the message,
highlight [Yes] and push <ENTER>.
5. Enter the address of the home location, highlight [OK] and push <ENTER>.
“Finding address” (page 4-4)
The map screen is displayed.
8. A message is displayed and the home
location is stored.
4. Highlight [Street Address] and push
<ENTER>. A character input screen is
displayed.
6. Adjust the location of your home
using the muti-function controller, if
necessary.
7. After adjusting the location, push
<ENTER>.
9. Highlight [OK] and push <ENTER>.
10. Push <MAP> to return to the current
location map screen. The home icon is
displayed on the map.
INFO:
The same setting can also be performed
by pushing <SETTING> and highlighting
[Navigation].
“Storing location by searching”
(page 6-2)
Getting started 2-17
SETTING DESTINATION
SEARCHING FOR DESTINATIONS
As an example, the method for setting a
restaurant as the destination using
[Places] is described here.
1. Push <DEST>.
2. Highlight [Places] and push <ENTER>.
3. Highlight [Nearby RESTAURANT] and
push <ENTER>.
INFO:
The search can also be narrowed
down by selecting [All Categories or
Name] on this screen. By selecting [All
Categories or Name], the area, name
of facility, etc. can be specified.
4. Highlight the preferred restaurant
from the list and push <ENTER>.
INFO:
. The position of the selected loca-
tion is displayed in the preview on
the right side of the screen.
. If there is a route already in pro-
gress, only places along the current
route will be listed. Turn off [Show
Along Route] at the top of list to
display all nearby places.
5. The entire route is shown on the map.
Highlight [Start] after confirming the
location of the displayed destination,
and push <ENTER>.
The system sets the destination to the
selected location and starts calculating a route.
INFO:
Even after setting a destination, the
location of the destination can be
adjusted, the route can be stored,
etc. if necessary.
“Procedures after setting destination” (page 5-2)
2-18 Getting started
STARTING ROUTE GUIDANCE
After setting the destination and performing route calculation, the suggested
route is displayed.
1. Highlight [Start] and push <ENTER>.
2. Once route guidance is started, the
system navigates through the guide
points using visual and voice guidance.
3. When approaching a guide point, the
system automatically changes to the
split screen and shows an enlarged
view of the intersection in the left
screen.
Push <MAP> to switch to the full map
screen.
4. When arriving at the destination, route
guidance automatically ends.
CANCELING ROUTE
Delete a route that is already set according to the following procedure.
1. Push <ROUTE>.
2. Highlight [Cancel Route] and push
<ENTER>.
3. A confirmation message is displayed.
Highlight [Yes] and push <ENTER>.
Getting started 2-19
OPERATING MAPS
INFO:
. If a route is canceled, [Cancel Route]
changes to [Resume Route].
Highlight [Resume Route] and push
<ENTER> to reactivate the canceled
route.
This is available only until a new route
is set or a currently set destination is
deleted.
. The above step does not delete the
destination that has been set. To
delete a destination, push <DEST>
and highlight [Delete Destination],
then push <ENTER>.
“Delete destination” (page 4-20)
HOW TO VIEW MAP SCREEN
The navigation system displays various
information on the map screen.
Screen information
Vehicle icon:
Indicates the current vehicle location
and the direction of travel.
Starting point:
Displays the vehicle location, with
which the route is set, as the starting
point.
Guide point:
Indicates a guide point on the route.
Waypoint:
Displays locations between the starting point and the destination. A maximum of 5 waypoints can be set.
2-20 Getting started
SETTING VOICE GUIDANCE
Destination:
Indicates the destination location of
the route guidance.
When you reach your destination, the
address will be displayed on the map
screen.
Suggested route:
Appears in bold yellow during route
guidance.
Map Menu icon:
Touch the icon to display the Map
Menu screen.
“Map menu screen” (page 2-15)
/ Direction indicator:
Indicates the directional setting of
the map. Touch the icon to change
the setting.
: North always pointing up.
: Traveling direction always pointing
up.
“Setting map orientation”
(page 3-14)
Scale indicator:
Indicates the scale of the map.
Touch the icon to display the scale
bar. This allows the map scale to be
adjusted.
“Operating with touch operation”
(page 3-10)
Street name:
Displays the name of the street that
the vehicle is currently driving on.
TURNING VOICE GUIDANCE ON/OFF
Voice guidance can be activated or deactivated.
1. Push <ROUTE>.
2. Highlight [Guidance Settings] and
push <ENTER>.
3. Highlight [Guidance Voice] and push
<ENTER>. The indicator illuminates if
voice guidance is activated.
Getting started 2-21
Other settings
Voice guidance can also be activated or
deactivated using the following procedure.
1. Push <ROUTE>.
2. Highlight [Guidance Settings] and
push <ENTER>.
1. Push <SETTING>.
2. Highlight [Volume & Beeps] and push
<ENTER>.
3. Highlight [Guidance Voice] and push
<ENTER>.
ADJUSTING VOICE GUIDANCE VOLUME
The voice guidance volume can be adjusted.
2-22 Getting started
3. Highlight [Guidance Volume] and push
<ENTER>.
4. Adjust the volume of voice guidance
by using the multi-function controller.
Other settings
Voice guidance volume can also be adjusted using the following procedure.
1. Push <SETTING>.
2. Highlight [Volume & Beeps] and push
<ENTER>.
3. Highlight [Guidance Volume] and push
<ENTER>.
Loading...